As requested I've combined my two series into a single one to provide some
better context for reviewers. I'm not sure which trees the patches should go in
via. The first two have already been applied by Sebastian (thanks). The binding
and dts changes (patches 3-5) would make sense to go in via linux-mips with
acks from the dt maintainers and the driver itself (patch 6) can go via
linux-i2c.

--
2.46.1

Chris Packham (6):
  dt-bindings: reset: syscon-reboot: Add reg property
  power: reset: syscon-reboot: Accept reg property
  dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  mips: dts: realtek: Add syscon-reboot node
  mips: dts: realtek: Add I2C controllers
  i2c: Add driver for the RTL9300 I2C controller

 .../bindings/i2c/realtek,rtl9301-i2c.yaml     |  69 +++
 .../bindings/mfd/realtek,rtl9301-switch.yaml  | 114 +++++
 .../bindings/power/reset/syscon-reboot.yaml   |  11 +-
 MAINTAINERS                                   |   7 +
 .../cameo-rtl9302c-2x-rtl8224-2xge.dts        |   2 +-
 arch/mips/boot/dts/realtek/rtl9302c.dtsi      |  15 +
 arch/mips/boot/dts/realtek/rtl930x.dtsi       |  29 ++
 drivers/i2c/busses/Kconfig                    |  10 +
 drivers/i2c/busses/Makefile                   |   1 +
 drivers/i2c/busses/i2c-rtl9300.c              | 425 ++++++++++++++++++
 drivers/power/reset/syscon-reboot.c           |   3 +-
 11 files changed, 683 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml
 create mode 100644 arch/mips/boot/dts/realtek/rtl9302c.dtsi
 create mode 100644 drivers/i2c/busses/i2c-rtl9300.c

-- 
2.47.0