Define clocks as supported by the RPMh on the SAR2130P platform. It
seems that on this platform RPMh models only CXO clock.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/clk-rpmh.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 4acde937114af3d7fdc15f3d125a72d42d0fde21..8cb15430d0171a8ed6b05e51d1901af63a4564c4 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -389,6 +389,16 @@ DEFINE_CLK_RPMH_BCM(ipa, "IP0");
 DEFINE_CLK_RPMH_BCM(pka, "PKA0");
 DEFINE_CLK_RPMH_BCM(qpic_clk, "QP0");
 
+static struct clk_hw *sar2130p_rpmh_clocks[] = {
+	[RPMH_CXO_CLK]		= &clk_rpmh_bi_tcxo_div1.hw,
+	[RPMH_CXO_CLK_A]	= &clk_rpmh_bi_tcxo_div1_ao.hw,
+};
+
+static const struct clk_rpmh_desc clk_rpmh_sar2130p = {
+	.clks = sar2130p_rpmh_clocks,
+	.num_clks = ARRAY_SIZE(sar2130p_rpmh_clocks),
+};
+
 static struct clk_hw *sdm845_rpmh_clocks[] = {
 	[RPMH_CXO_CLK]		= &clk_rpmh_bi_tcxo_div2.hw,
 	[RPMH_CXO_CLK_A]	= &clk_rpmh_bi_tcxo_div2_ao.hw,
@@ -880,6 +890,7 @@ static int clk_rpmh_probe(struct platform_device *pdev)
 static const struct of_device_id clk_rpmh_match_table[] = {
 	{ .compatible = "qcom,qdu1000-rpmh-clk", .data = &clk_rpmh_qdu1000},
 	{ .compatible = "qcom,sa8775p-rpmh-clk", .data = &clk_rpmh_sa8775p},
+	{ .compatible = "qcom,sar2130p-rpmh-clk", .data = &clk_rpmh_sar2130p},
 	{ .compatible = "qcom,sc7180-rpmh-clk", .data = &clk_rpmh_sc7180},
 	{ .compatible = "qcom,sc8180x-rpmh-clk", .data = &clk_rpmh_sc8180x},
 	{ .compatible = "qcom,sc8280xp-rpmh-clk", .data = &clk_rpmh_sc8280xp},

-- 
2.39.5

On 17.10.2024 6:57 PM, Dmitry Baryshkov wrote:
> Define clocks as supported by the RPMh on the SAR2130P platform. It
> seems that on this platform RPMh models only CXO clock.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/clk/qcom/clk-rpmh.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
> index 4acde937114af3d7fdc15f3d125a72d42d0fde21..8cb15430d0171a8ed6b05e51d1901af63a4564c4 100644
> --- a/drivers/clk/qcom/clk-rpmh.c
> +++ b/drivers/clk/qcom/clk-rpmh.c
> @@ -389,6 +389,16 @@ DEFINE_CLK_RPMH_BCM(ipa, "IP0");
>  DEFINE_CLK_RPMH_BCM(pka, "PKA0");
>  DEFINE_CLK_RPMH_BCM(qpic_clk, "QP0");
>  
> +static struct clk_hw *sar2130p_rpmh_clocks[] = {
> +	[RPMH_CXO_CLK]		= &clk_rpmh_bi_tcxo_div1.hw,
> +	[RPMH_CXO_CLK_A]	= &clk_rpmh_bi_tcxo_div1_ao.hw,
> +};
> +
> +static const struct clk_rpmh_desc clk_rpmh_sar2130p = {
> +	.clks = sar2130p_rpmh_clocks,
> +	.num_clks = ARRAY_SIZE(sar2130p_rpmh_clocks),
> +};

This is identical to the QDU1000 setup. Perhaps you can rename it to
something generic (bi_tcxo_div1_clocks[]) and reference it in both
compatible strings (as the compatibility seems rather incidental)

Konrad