auto_boot flag ensures to take the firmware and boots it
up during the wpss remoteproc start.
wpss host driver would like to control the load and unload
of the firmware during the load and unload of the driver.
Hence, disable the "auto boot" for wpss.

Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
---
Cc: ath11k@lists.infradead.org
Cc: Kalle Valo <kvalo@kernel.org>
---
 drivers/remoteproc/qcom_q6v5_pas.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index ef82835e98a4..05963d7924df 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -1344,7 +1344,7 @@ static const struct adsp_data sc7280_wpss_resource = {
 	.crash_reason_smem = 626,
 	.firmware_name = "wpss.mdt",
 	.pas_id = 6,
-	.auto_boot = true,
+	.auto_boot = false,
 	.proxy_pd_names = (char*[]){
 		"cx",
 		"mx",
-- 
2.34.1

On Wed, Oct 16, 2024 at 07:24:09PM +0530, Balaji Pothunoori wrote:
> auto_boot flag ensures to take the firmware and boots it
> up during the wpss remoteproc start.
> wpss host driver would like to control the load and unload
> of the firmware during the load and unload of the driver.
> Hence, disable the "auto boot" for wpss.

Which driver? What is the reason for manual control?
The board seems to function properly with the ath11k driver, which
doesn't seem to require manual control.

> 
> Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
> ---
> Cc: ath11k@lists.infradead.org
> Cc: Kalle Valo <kvalo@kernel.org>
> ---
>  drivers/remoteproc/qcom_q6v5_pas.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index ef82835e98a4..05963d7924df 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -1344,7 +1344,7 @@ static const struct adsp_data sc7280_wpss_resource = {
>  	.crash_reason_smem = 626,
>  	.firmware_name = "wpss.mdt",
>  	.pas_id = 6,
> -	.auto_boot = true,
> +	.auto_boot = false,
>  	.proxy_pd_names = (char*[]){
>  		"cx",
>  		"mx",
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry