The theory is that the so called workaround in pwr_reg_rdwr() is
the actual reader of the data in 32-bit chunks. For some reason
the 8-bit IO won't fail after that. Replace the workaround by using
32-bit IO explicitly and then memcpy() as much data as was requested
by the user. The same approach is already in use in
intel_scu_ipc_dev_command_with_size().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/platform/x86/intel_scu_ipc.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 5b16d29c93d7..290b38627542 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -217,12 +217,6 @@ static inline u8 ipc_read_status(struct intel_scu_ipc_dev *scu)
return __raw_readl(scu->ipc_base + IPC_STATUS);
}
-/* Read ipc byte data */
-static inline u8 ipc_data_readb(struct intel_scu_ipc_dev *scu, u32 offset)
-{
- return readb(scu->ipc_base + IPC_READ_BUFFER + offset);
-}
-
/* Read ipc u32 data */
static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset)
{
@@ -325,11 +319,10 @@ static int pwr_reg_rdwr(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
}
err = intel_scu_ipc_check_status(scu);
- if (!err && id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
- /* Workaround: values are read as 0 without memcpy_fromio */
- memcpy_fromio(cbuf, scu->ipc_base + 0x90, 16);
- for (nc = 0; nc < count; nc++)
- data[nc] = ipc_data_readb(scu, nc);
+ if (!err) { /* Read rbuf */
+ for (nc = 0, offset = 0; nc < 4; nc++, offset += 4)
+ wbuf[nc] = ipc_data_readl(scu, offset);
+ memcpy(data, wbuf, count);
}
mutex_unlock(&ipclock);
return err;
--
2.43.0.rc1.1336.g36b5255a03ac