Only access to RTC alarm is blocked.

Enable RTC access by setting the no-alarm flag.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
index 5b54ee79f048e..304a98d60472e 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
@@ -220,11 +220,9 @@ pon_resin: resin {
 
 		pmk8550_rtc: rtc@6100 {
 			compatible = "qcom,pmk8350-rtc";
-			reg = <0x6100>, <0x6200>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
-			/* Not yet sure what blocks access */
-			status = "reserved";
+			reg = <0x6100>;
+			reg-names = "rtc";
+			no-alarm; /* alarm owned by ADSP */
 		};
 
 		pmk8550_sdam_2: nvram@7100 {
-- 
2.45.1