From: "Jan Petrous (OSS)" <jan.petrous@oss.nxp.com>

The PTP clock is read by stmmac_platform during DT parse.
On S32G/R the clock is not ready and returns 0. Postpone
reading of the clock on PTP init.

Co-developed-by: Andrei Botila <andrei.botila@nxp.org>
Signed-off-by: Andrei Botila <andrei.botila@nxp.org>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
index aedd6bf80684..3daf282d8da7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
@@ -140,6 +140,18 @@ static void s32_fix_mac_speed(void *priv, unsigned int speed, unsigned int mode)
 		dev_err(gmac->dev, "Can't set tx clock\n");
 }
 
+static void s32_dwmac_ptp_clk_freq_config(struct stmmac_priv *priv)
+{
+	struct plat_stmmacenet_data *plat = priv->plat;
+
+	if (!plat->clk_ptp_ref)
+		return;
+
+	plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
+
+	netdev_dbg(priv->dev, "PTP rate %lu\n", plat->clk_ptp_rate);
+}
+
 static int s32_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat;
@@ -195,6 +207,7 @@ static int s32_dwmac_probe(struct platform_device *pdev)
 	plat->init = s32_gmac_init;
 	plat->exit = s32_gmac_exit;
 	plat->fix_mac_speed = s32_fix_mac_speed;
+	plat->ptp_clk_freq_config = s32_dwmac_ptp_clk_freq_config;
 
 	plat->bsp_priv = gmac;
 

-- 
2.46.0