This patch series carries some miscellaneous
omap driver fixes for GPIO and UART drivers.

For GPIO, add gpio_enable and gpio_disable calls
to gpio-omap which fixes an issue where if there
is an irq storm, serial console is unresponsive.

For UART, move pm_runtime_get_sync since the
current order of omap_8250_rx_dma_flush and
pm_runtime_get_sync calls are set in a way that
when omap_8250_shutdown returns, dma->rx_running
is set and this causes issues next time the UART
is re-opened.

Judith Mendez (2):
  gpio: omap: Add omap_gpio_disable/enable_irq calls
  serial: 8250: omap: Move pm_runtime_get_sync

 drivers/gpio/gpio-omap.c            | 29 +++++++++++++++++++++++++++++
 drivers/tty/serial/8250/8250_omap.c |  4 ++--
 2 files changed, 31 insertions(+), 2 deletions(-)


base-commit: f45840d172a06d07a1a408b38bdb0be9ab3fd8cb
-- 
2.46.2

Hi all,

On 10/10/24 1:48 PM, Judith Mendez wrote:
> This patch series carries some miscellaneous
> omap driver fixes for GPIO and UART drivers.
> 
> For GPIO, add gpio_enable and gpio_disable calls
> to gpio-omap which fixes an issue where if there
> is an irq storm, serial console is unresponsive.
> 
> For UART, move pm_runtime_get_sync since the
> current order of omap_8250_rx_dma_flush and
> pm_runtime_get_sync calls are set in a way that
> when omap_8250_shutdown returns, dma->rx_running
> is set and this causes issues next time the UART
> is re-opened.

Please ignore this patch series, I will be re-sending
this patch series with some CC list cleanups.

~ Judith