Add dts nodes to enable ethernet interface on qcs8300-ride and
Rev 2 platforms.
The EMAC, SerDes and EPHY version are the same as those in sa8775p.

Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
---
This patch series depends on below patch series:
https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@quicinc.com/
https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@quicinc.com/

---
Yijie Yang (5):
      dt-bindings: arm: qcom: add qcs8300-ride Rev 2
      arm64: dts: qcom: qcs8300: add the first 1Gb ethernet
      arm64: dts: qcom: qcs8300-ride: enable ethernet0
      arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi
      arm64: dts: qcom: qcs8300-ride-r2: add new board file

 Documentation/devicetree/bindings/arm/qcom.yaml |   1 +
 arch/arm64/boot/dts/qcom/Makefile               |   1 +
 arch/arm64/boot/dts/qcom/qcs8300-ride-r2.dts    |  33 +++
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts       | 267 ++---------------
 arch/arm64/boot/dts/qcom/qcs8300-ride.dtsi      | 364 ++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qcs8300.dtsi           |  43 +++
 6 files changed, 458 insertions(+), 251 deletions(-)
---
base-commit: 41d815847be394bd5741faf6a3c1a7adb9f17066
change-id: 20241010-dts_qcs8300-bfc87dda5175

Best regards,
-- 
Yijie Yang <quic_yijiyang@quicinc.com>