Now that exynos_ufs_specify_phy_time_attr() checks the appropriate
EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR flag. Remove the unused fields
in gs101_uic_attr.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
drivers/ufs/host/ufs-exynos.c | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index a1a2fdcb8a40..9d668d13fe94 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -2068,26 +2068,6 @@ static const struct exynos_ufs_drv_data exynos_ufs_drvs = {
static struct exynos_ufs_uic_attr gs101_uic_attr = {
.tx_trailingclks = 0xff,
- .tx_dif_p_nsec = 3000000, /* unit: ns */
- .tx_dif_n_nsec = 1000000, /* unit: ns */
- .tx_high_z_cnt_nsec = 20000, /* unit: ns */
- .tx_base_unit_nsec = 100000, /* unit: ns */
- .tx_gran_unit_nsec = 4000, /* unit: ns */
- .tx_sleep_cnt = 1000, /* unit: ns */
- .tx_min_activatetime = 0xa,
- .rx_filler_enable = 0x2,
- .rx_dif_p_nsec = 1000000, /* unit: ns */
- .rx_hibern8_wait_nsec = 4000000, /* unit: ns */
- .rx_base_unit_nsec = 100000, /* unit: ns */
- .rx_gran_unit_nsec = 4000, /* unit: ns */
- .rx_sleep_cnt = 1280, /* unit: ns */
- .rx_stall_cnt = 320, /* unit: ns */
- .rx_hs_g1_sync_len_cap = SYNC_LEN_COARSE(0xf),
- .rx_hs_g2_sync_len_cap = SYNC_LEN_COARSE(0xf),
- .rx_hs_g3_sync_len_cap = SYNC_LEN_COARSE(0xf),
- .rx_hs_g1_prep_sync_len_cap = PREP_LEN(0xf),
- .rx_hs_g2_prep_sync_len_cap = PREP_LEN(0xf),
- .rx_hs_g3_prep_sync_len_cap = PREP_LEN(0xf),
.pa_dbg_opt_suite1_val = 0x90913C1C,
.pa_dbg_opt_suite1_off = PA_GS101_DBG_OPTION_SUITE1,
.pa_dbg_opt_suite2_val = 0xE01C115F,
--
2.47.0.rc0.187.ge670bccf7e-goog