The "synopsys,dw-hdmi.yaml" binding specifies that the interrupts
property of the hdmi node has 'maxItems: 1', so the hdmi node in
rk3328.dtsi having 2 is incorrect.
Paragraph 1.3 ("System Interrupt connection") of the RK3328 TRM v1.1
page 16 and 17 define the following hdmi related interrupts:
- 67 hdmi_intr
- 103 hdmi_intr_wakeup
The difference of 32 is due to a different base used in the TRM.
The RK3399 (which uses the same binding) has '23: hdmi_irq' and
'24: hdmi_wakeup_irq' according to its TRM (page 19).
The RK3568 (also same binding) has '76: hdmi_wakeup' and '77: hdmi'
according to page 17 of its TRM.
In both cases the non-wakeup IRQ was used, so use that too for rk3328.
Helped-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 725e351c265a ("arm64: dts: rockchip: add rk3328 display nodes")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
---
changes in v2:
- Added Fixes tag
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index b5cbe7cab10b..0597de415fe0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -754,8 +754,7 @@ hdmi: hdmi@ff3c0000 {
compatible = "rockchip,rk3328-dw-hdmi";
reg = <0x0 0xff3c0000 0x0 0x20000>;
reg-io-width = <4>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>,
<&cru SCLK_HDMI_SFC>,
<&cru SCLK_RTC32K>;
--
2.45.2