From: Chen Ridong <chenridong@huawei.com>

A hung_task problem shown below was found:

INFO: task kworker/0:0:8 blocked for more than 327 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Workqueue: events cgroup_bpf_release
Call Trace:
 <TASK>
 __schedule+0x5a2/0x2050
 ? find_held_lock+0x33/0x100
 ? wq_worker_sleeping+0x9e/0xe0
 schedule+0x9f/0x180
 schedule_preempt_disabled+0x25/0x50
 __mutex_lock+0x512/0x740
 ? cgroup_bpf_release+0x1e/0x4d0
 ? cgroup_bpf_release+0xcf/0x4d0
 ? process_scheduled_works+0x161/0x8a0
 ? cgroup_bpf_release+0x1e/0x4d0
 ? mutex_lock_nested+0x2b/0x40
 ? __pfx_delay_tsc+0x10/0x10
 mutex_lock_nested+0x2b/0x40
 cgroup_bpf_release+0xcf/0x4d0
 ? process_scheduled_works+0x161/0x8a0
 ? trace_event_raw_event_workqueue_execute_start+0x64/0xd0
 ? process_scheduled_works+0x161/0x8a0
 process_scheduled_works+0x23a/0x8a0
 worker_thread+0x231/0x5b0
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x14d/0x1c0
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x59/0x70
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1b/0x30
 </TASK>

This issue can be reproduced by the following pressuse test:
1. A large number of cpuset cgroups are deleted.
2. Set cpu on and off repeatly.
3. Set watchdog_thresh repeatly.
The scripts can be obtained at LINK mentioned above the signature.

The reason for this issue is cgroup_mutex and cpu_hotplug_lock are
acquired in different tasks, which may lead to deadlock.
It can lead to a deadlock through the following steps:
1. A large number of cpusets are deleted asynchronously, which puts a
   large number of cgroup_bpf_release works into system_wq. The max_active
   of system_wq is WQ_DFL_ACTIVE(256). Consequently, all active works are
   cgroup_bpf_release works, and many cgroup_bpf_release works will be put
   into inactive queue. As illustrated in the diagram, there are 256 (in
   the acvtive queue) + n (in the inactive queue) works.
2. Setting watchdog_thresh will hold cpu_hotplug_lock.read and put
   smp_call_on_cpu work into system_wq. However step 1 has already filled
   system_wq, 'sscs.work' is put into inactive queue. 'sscs.work' has
   to wait until the works that were put into the inacvtive queue earlier
   have executed (n cgroup_bpf_release), so it will be blocked for a while.
3. Cpu offline requires cpu_hotplug_lock.write, which is blocked by step 2.
4. Cpusets that were deleted at step 1 put cgroup_release works into
   cgroup_destroy_wq. They are competing to get cgroup_mutex all the time.
   When cgroup_metux is acqured by work at css_killed_work_fn, it will
   call cpuset_css_offline, which needs to acqure cpu_hotplug_lock.read.
   However, cpuset_css_offline will be blocked for step 3.
5. At this moment, there are 256 works in active queue that are
   cgroup_bpf_release, they are attempting to acquire cgroup_mutex, and as
   a result, all of them are blocked. Consequently, sscs.work can not be
   executed. Ultimately, this situation leads to four processes being
   blocked, forming a deadlock.

system_wq(step1)		WatchDog(step2)			cpu offline(step3)	cgroup_destroy_wq(step4)
...
2000+ cgroups deleted asyn
256 actives + n inactives
				__lockup_detector_reconfigure
				P(cpu_hotplug_lock.read)
				put sscs.work into system_wq
256 + n + 1(sscs.work)
sscs.work wait to be executed
				warting sscs.work finish
								percpu_down_write
								P(cpu_hotplug_lock.write)
								...blocking...
											css_killed_work_fn
											P(cgroup_mutex)
											cpuset_css_offline
											P(cpu_hotplug_lock.read)
											...blocking...
256 cgroup_bpf_release
mutex_lock(&cgroup_mutex);
..blocking...

To fix the problem, place cgroup_bpf_release works on a dedicated
workqueue which can break the loop and solve the problem. System wqs are
for misc things which shouldn't create a large number of concurrent work
items. If something is going to generate >WQ_DFL_ACTIVE(256) concurrent
work items, it should use its own dedicated workqueue.

Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Link: https://lore.kernel.org/cgroups/e90c32d2-2a85-4f28-9154-09c7d320cb60@huawei.com/T/#t
Tested-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
---
 kernel/bpf/cgroup.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c
index e7113d700b87..025d7e2214ae 100644
--- a/kernel/bpf/cgroup.c
+++ b/kernel/bpf/cgroup.c
@@ -24,6 +24,23 @@
 DEFINE_STATIC_KEY_ARRAY_FALSE(cgroup_bpf_enabled_key, MAX_CGROUP_BPF_ATTACH_TYPE);
 EXPORT_SYMBOL(cgroup_bpf_enabled_key);
 
+/*
+ * cgroup bpf destruction makes heavy use of work items and there can be a lot
+ * of concurrent destructions.  Use a separate workqueue so that cgroup bpf
+ * destruction work items don't end up filling up max_active of system_wq
+ * which may lead to deadlock.
+ */
+static struct workqueue_struct *cgroup_bpf_destroy_wq;
+
+static int __init cgroup_bpf_wq_init(void)
+{
+	cgroup_bpf_destroy_wq = alloc_workqueue("cgroup_bpf_destroy", 0, 1);
+	if (!cgroup_bpf_destroy_wq)
+		panic("Failed to alloc workqueue for cgroup bpf destroy.\n");
+	return 0;
+}
+core_initcall(cgroup_bpf_wq_init);
+
 /* __always_inline is necessary to prevent indirect call through run_prog
  * function pointer.
  */
@@ -334,7 +351,7 @@ static void cgroup_bpf_release_fn(struct percpu_ref *ref)
 	struct cgroup *cgrp = container_of(ref, struct cgroup, bpf.refcnt);
 
 	INIT_WORK(&cgrp->bpf.release_work, cgroup_bpf_release);
-	queue_work(system_wq, &cgrp->bpf.release_work);
+	queue_work(cgroup_bpf_destroy_wq, &cgrp->bpf.release_work);
 }
 
 /* Get underlying bpf_prog of bpf_prog_list entry, regardless if it's through
-- 
2.34.1

On Tue, Oct 08, 2024 at 11:24:56AM +0000, Chen Ridong wrote:
...
> To fix the problem, place cgroup_bpf_release works on a dedicated
> workqueue which can break the loop and solve the problem. System wqs are
> for misc things which shouldn't create a large number of concurrent work
> items. If something is going to generate >WQ_DFL_ACTIVE(256) concurrent
> work items, it should use its own dedicated workqueue.
> 
> Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
> Link: https://lore.kernel.org/cgroups/e90c32d2-2a85-4f28-9154-09c7d320cb60@huawei.com/T/#t
> Tested-by: Vishal Chourasia <vishalc@linux.ibm.com>
> Signed-off-by: Chen Ridong <chenridong@huawei.com>

Applied to cgroup/for-6.12-fixes w/ stable cc'd.

Thanks.

-- 
tejun