drivers/remoteproc/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
From: Arnd Bergmann <arnd@arndb.de>
The k3-m4 remoteproc driver was merged with incorrect dependencies.
Despite multiple people trying to fix this, the version 6.12-rc2
remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m
when the driver is built-in.
arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
Fix the dependency again to make it work in all configurations.
The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers
dependencies. The link failure can be avoided with a simple 'depends
do, so turn that into the same 'depends' to ensure we get no circular
on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what
we use elsehwere. On the other hand, building for OMAP2PLUS makes
no sense since the hardware only exists on K3.
Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Fixes: ba0c0cb56f22 ("remoteproc: k3-m4: use the proper dependencies")
Fixes: 54595f2807d2 ("mailbox, remoteproc: omap2+: fix compile testing")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/remoteproc/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 955e4e38477e..62f8548fb46a 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -341,9 +341,9 @@ config TI_K3_DSP_REMOTEPROC
config TI_K3_M4_REMOTEPROC
tristate "TI K3 M4 remoteproc support"
- depends on ARCH_OMAP2PLUS || ARCH_K3
- select MAILBOX
- select OMAP2PLUS_MBOX
+ depends on ARCH_K3 || COMPILE_TEST
+ depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
+ depends on OMAP2PLUS_MBOX
help
Say m here to support TI's M4 remote processor subsystems
on various TI K3 family of SoCs through the remote processor
--
2.39.2On 10/7/24 8:23 AM, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The k3-m4 remoteproc driver was merged with incorrect dependencies.
> Despite multiple people trying to fix this, the version 6.12-rc2
> remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m
> when the driver is built-in.
>
> arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
> ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
>
> Fix the dependency again to make it work in all configurations.
> The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers
> dependencies. The link failure can be avoided with a simple 'depends
> do, so turn that into the same 'depends' to ensure we get no circular
> on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what
> we use elsehwere. On the other hand, building for OMAP2PLUS makes
> no sense since the hardware only exists on K3.
>
> Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
> Fixes: ba0c0cb56f22 ("remoteproc: k3-m4: use the proper dependencies")
> Fixes: 54595f2807d2 ("mailbox, remoteproc: omap2+: fix compile testing")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/remoteproc/Kconfig | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 955e4e38477e..62f8548fb46a 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -341,9 +341,9 @@ config TI_K3_DSP_REMOTEPROC
>
> config TI_K3_M4_REMOTEPROC
> tristate "TI K3 M4 remoteproc support"
> - depends on ARCH_OMAP2PLUS || ARCH_K3
> - select MAILBOX
> - select OMAP2PLUS_MBOX
> + depends on ARCH_K3 || COMPILE_TEST
> + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
This line is odd. IMHO "COMPILE_TEST" should only be added to ARCH_*
dependencies, as often only one ARCH can be selected which prevents
compile testing drivers with various multiple architecture deps in
one compile test.
Normal dependencies, on the other hand, can simply be enabled if one
wants to compile test its dependent drivers. In this case, TI_SCI_PROTOCOL
cannot be enabled as it has a dependency up the chain that doesn't
allow selecting when not on a TI platform. We can fix that as I posted
here[0]. With that fix in, this line can be simply become:
depends on TI_SCI_PROTOCOL
Andrew
[0] https://lore.kernel.org/lkml/20241014144821.15094-1-afd@ti.com/
> + depends on OMAP2PLUS_MBOX
> help
> Say m here to support TI's M4 remote processor subsystems
> on various TI K3 family of SoCs through the remote processor
On Mon, Oct 14, 2024 at 09:56:11AM -0500, Andrew Davis wrote:
> On 10/7/24 8:23 AM, Arnd Bergmann wrote:
> > From: Arnd Bergmann <arnd@arndb.de>
> >
> > The k3-m4 remoteproc driver was merged with incorrect dependencies.
> > Despite multiple people trying to fix this, the version 6.12-rc2
> > remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m
> > when the driver is built-in.
> >
> > arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
> > ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
> >
> > Fix the dependency again to make it work in all configurations.
> > The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers
> > dependencies. The link failure can be avoided with a simple 'depends
> > do, so turn that into the same 'depends' to ensure we get no circular
> > on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what
> > we use elsehwere. On the other hand, building for OMAP2PLUS makes
> > no sense since the hardware only exists on K3.
> >
> > Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
> > Fixes: ba0c0cb56f22 ("remoteproc: k3-m4: use the proper dependencies")
> > Fixes: 54595f2807d2 ("mailbox, remoteproc: omap2+: fix compile testing")
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > ---
> > drivers/remoteproc/Kconfig | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> > index 955e4e38477e..62f8548fb46a 100644
> > --- a/drivers/remoteproc/Kconfig
> > +++ b/drivers/remoteproc/Kconfig
> > @@ -341,9 +341,9 @@ config TI_K3_DSP_REMOTEPROC
> > config TI_K3_M4_REMOTEPROC
> > tristate "TI K3 M4 remoteproc support"
> > - depends on ARCH_OMAP2PLUS || ARCH_K3
> > - select MAILBOX
> > - select OMAP2PLUS_MBOX
> > + depends on ARCH_K3 || COMPILE_TEST
> > + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
>
> This line is odd. IMHO "COMPILE_TEST" should only be added to ARCH_*
> dependencies, as often only one ARCH can be selected which prevents
> compile testing drivers with various multiple architecture deps in
> one compile test.
>
> Normal dependencies, on the other hand, can simply be enabled if one
> wants to compile test its dependent drivers. In this case, TI_SCI_PROTOCOL
> cannot be enabled as it has a dependency up the chain that doesn't
> allow selecting when not on a TI platform. We can fix that as I posted
> here[0]. With that fix in, this line can be simply become:
>
> depends on TI_SCI_PROTOCOL
From the above and the follow-on conversation with Nishanth, should I understand
you are working on a patchset to address this issue? If not I will apply Arnd's
patch. People are sending different fix [1] - the issue needs to be addressed
well before the end of the cycle.
[1]. https://lore.kernel.org/linux-arm-kernel/20241016013922.1392290-1-zengheng4@huawei.com/T/
>
> Andrew
>
> [0] https://lore.kernel.org/lkml/20241014144821.15094-1-afd@ti.com/
>
> > + depends on OMAP2PLUS_MBOX
> > help
> > Say m here to support TI's M4 remote processor subsystems
> > on various TI K3 family of SoCs through the remote processor
On 10/16/24 10:26 AM, Mathieu Poirier wrote:
> On Mon, Oct 14, 2024 at 09:56:11AM -0500, Andrew Davis wrote:
>> On 10/7/24 8:23 AM, Arnd Bergmann wrote:
>>> From: Arnd Bergmann <arnd@arndb.de>
>>>
>>> The k3-m4 remoteproc driver was merged with incorrect dependencies.
>>> Despite multiple people trying to fix this, the version 6.12-rc2
>>> remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m
>>> when the driver is built-in.
>>>
>>> arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
>>> ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
>>>
>>> Fix the dependency again to make it work in all configurations.
>>> The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers
>>> dependencies. The link failure can be avoided with a simple 'depends
>>> do, so turn that into the same 'depends' to ensure we get no circular
>>> on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what
>>> we use elsehwere. On the other hand, building for OMAP2PLUS makes
>>> no sense since the hardware only exists on K3.
>>>
>>> Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
>>> Fixes: ba0c0cb56f22 ("remoteproc: k3-m4: use the proper dependencies")
>>> Fixes: 54595f2807d2 ("mailbox, remoteproc: omap2+: fix compile testing")
>>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>>> ---
>>> drivers/remoteproc/Kconfig | 6 +++---
>>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
>>> index 955e4e38477e..62f8548fb46a 100644
>>> --- a/drivers/remoteproc/Kconfig
>>> +++ b/drivers/remoteproc/Kconfig
>>> @@ -341,9 +341,9 @@ config TI_K3_DSP_REMOTEPROC
>>> config TI_K3_M4_REMOTEPROC
>>> tristate "TI K3 M4 remoteproc support"
>>> - depends on ARCH_OMAP2PLUS || ARCH_K3
>>> - select MAILBOX
>>> - select OMAP2PLUS_MBOX
>>> + depends on ARCH_K3 || COMPILE_TEST
>>> + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
>>
>> This line is odd. IMHO "COMPILE_TEST" should only be added to ARCH_*
>> dependencies, as often only one ARCH can be selected which prevents
>> compile testing drivers with various multiple architecture deps in
>> one compile test.
>>
>> Normal dependencies, on the other hand, can simply be enabled if one
>> wants to compile test its dependent drivers. In this case, TI_SCI_PROTOCOL
>> cannot be enabled as it has a dependency up the chain that doesn't
>> allow selecting when not on a TI platform. We can fix that as I posted
>> here[0]. With that fix in, this line can be simply become:
>>
>> depends on TI_SCI_PROTOCOL
>
> From the above and the follow-on conversation with Nishanth, should I understand
> you are working on a patchset to address this issue? If not I will apply Arnd's
> patch. People are sending different fix [1] - the issue needs to be addressed
> well before the end of the cycle.
>
This is a bit complex as it touches multiple subsystems. You should take Arnd's
patch. This will fix this for M4, I will then add a follow on patch doing the same
for the other two remoteproc drivers (DSP and R5).
When my series here[0] goes in I will then send a final patch removing the depends
TI_SCI_PROTOCOL=n oddness from all 3 drivers. This final step does not need to happen
this cycle though, only the first two steps are needed to prevent any further compile
test issues.
Andrew
[0] https://lore.kernel.org/lkml/20241015213322.2649011-1-afd@ti.com/
> [1]. https://lore.kernel.org/linux-arm-kernel/20241016013922.1392290-1-zengheng4@huawei.com/T/
>
>>
>> Andrew
>>
>> [0] https://lore.kernel.org/lkml/20241014144821.15094-1-afd@ti.com/
>>
>>> + depends on OMAP2PLUS_MBOX
>>> help
>>> Say m here to support TI's M4 remote processor subsystems
>>> on various TI K3 family of SoCs through the remote processor
On Wed, Oct 16, 2024 at 10:37:35AM -0500, Andrew Davis wrote:
> On 10/16/24 10:26 AM, Mathieu Poirier wrote:
> > On Mon, Oct 14, 2024 at 09:56:11AM -0500, Andrew Davis wrote:
> > > On 10/7/24 8:23 AM, Arnd Bergmann wrote:
> > > > From: Arnd Bergmann <arnd@arndb.de>
> > > >
> > > > The k3-m4 remoteproc driver was merged with incorrect dependencies.
> > > > Despite multiple people trying to fix this, the version 6.12-rc2
> > > > remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m
> > > > when the driver is built-in.
> > > >
> > > > arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
> > > > ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
> > > >
> > > > Fix the dependency again to make it work in all configurations.
> > > > The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers
> > > > dependencies. The link failure can be avoided with a simple 'depends
> > > > do, so turn that into the same 'depends' to ensure we get no circular
> > > > on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what
> > > > we use elsehwere. On the other hand, building for OMAP2PLUS makes
> > > > no sense since the hardware only exists on K3.
> > > >
> > > > Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
> > > > Fixes: ba0c0cb56f22 ("remoteproc: k3-m4: use the proper dependencies")
> > > > Fixes: 54595f2807d2 ("mailbox, remoteproc: omap2+: fix compile testing")
> > > > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > > > ---
> > > > drivers/remoteproc/Kconfig | 6 +++---
> > > > 1 file changed, 3 insertions(+), 3 deletions(-)
> > > >
> > > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> > > > index 955e4e38477e..62f8548fb46a 100644
> > > > --- a/drivers/remoteproc/Kconfig
> > > > +++ b/drivers/remoteproc/Kconfig
> > > > @@ -341,9 +341,9 @@ config TI_K3_DSP_REMOTEPROC
> > > > config TI_K3_M4_REMOTEPROC
> > > > tristate "TI K3 M4 remoteproc support"
> > > > - depends on ARCH_OMAP2PLUS || ARCH_K3
> > > > - select MAILBOX
> > > > - select OMAP2PLUS_MBOX
> > > > + depends on ARCH_K3 || COMPILE_TEST
> > > > + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
> > >
> > > This line is odd. IMHO "COMPILE_TEST" should only be added to ARCH_*
> > > dependencies, as often only one ARCH can be selected which prevents
> > > compile testing drivers with various multiple architecture deps in
> > > one compile test.
> > >
> > > Normal dependencies, on the other hand, can simply be enabled if one
> > > wants to compile test its dependent drivers. In this case, TI_SCI_PROTOCOL
> > > cannot be enabled as it has a dependency up the chain that doesn't
> > > allow selecting when not on a TI platform. We can fix that as I posted
> > > here[0]. With that fix in, this line can be simply become:
> > >
> > > depends on TI_SCI_PROTOCOL
> >
> > From the above and the follow-on conversation with Nishanth, should I understand
> > you are working on a patchset to address this issue? If not I will apply Arnd's
> > patch. People are sending different fix [1] - the issue needs to be addressed
> > well before the end of the cycle.
> >
>
> This is a bit complex as it touches multiple subsystems. You should take Arnd's
> patch. This will fix this for M4, I will then add a follow on patch doing the same
> for the other two remoteproc drivers (DSP and R5).
>
> When my series here[0] goes in I will then send a final patch removing the depends
> TI_SCI_PROTOCOL=n oddness from all 3 drivers. This final step does not need to happen
> this cycle though, only the first two steps are needed to prevent any further compile
> test issues.
>
I have applied Arnd's patch.
> Andrew
>
> [0] https://lore.kernel.org/lkml/20241015213322.2649011-1-afd@ti.com/
>
> > [1]. https://lore.kernel.org/linux-arm-kernel/20241016013922.1392290-1-zengheng4@huawei.com/T/
> >
> > >
> > > Andrew
> > >
> > > [0] https://lore.kernel.org/lkml/20241014144821.15094-1-afd@ti.com/
> > >
> > > > + depends on OMAP2PLUS_MBOX
> > > > help
> > > > Say m here to support TI's M4 remote processor subsystems
> > > > on various TI K3 family of SoCs through the remote processor
On 10/16/24 11:02 AM, Mathieu Poirier wrote:
> On Wed, Oct 16, 2024 at 10:37:35AM -0500, Andrew Davis wrote:
>> On 10/16/24 10:26 AM, Mathieu Poirier wrote:
>>> On Mon, Oct 14, 2024 at 09:56:11AM -0500, Andrew Davis wrote:
>>>> On 10/7/24 8:23 AM, Arnd Bergmann wrote:
>>>>> From: Arnd Bergmann <arnd@arndb.de>
>>>>>
>>>>> The k3-m4 remoteproc driver was merged with incorrect dependencies.
>>>>> Despite multiple people trying to fix this, the version 6.12-rc2
>>>>> remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m
>>>>> when the driver is built-in.
>>>>>
>>>>> arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
>>>>> ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
>>>>>
>>>>> Fix the dependency again to make it work in all configurations.
>>>>> The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers
>>>>> dependencies. The link failure can be avoided with a simple 'depends
>>>>> do, so turn that into the same 'depends' to ensure we get no circular
>>>>> on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what
>>>>> we use elsehwere. On the other hand, building for OMAP2PLUS makes
>>>>> no sense since the hardware only exists on K3.
>>>>>
>>>>> Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
>>>>> Fixes: ba0c0cb56f22 ("remoteproc: k3-m4: use the proper dependencies")
>>>>> Fixes: 54595f2807d2 ("mailbox, remoteproc: omap2+: fix compile testing")
>>>>> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>>>>> ---
>>>>> drivers/remoteproc/Kconfig | 6 +++---
>>>>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
>>>>> index 955e4e38477e..62f8548fb46a 100644
>>>>> --- a/drivers/remoteproc/Kconfig
>>>>> +++ b/drivers/remoteproc/Kconfig
>>>>> @@ -341,9 +341,9 @@ config TI_K3_DSP_REMOTEPROC
>>>>> config TI_K3_M4_REMOTEPROC
>>>>> tristate "TI K3 M4 remoteproc support"
>>>>> - depends on ARCH_OMAP2PLUS || ARCH_K3
>>>>> - select MAILBOX
>>>>> - select OMAP2PLUS_MBOX
>>>>> + depends on ARCH_K3 || COMPILE_TEST
>>>>> + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
>>>>
>>>> This line is odd. IMHO "COMPILE_TEST" should only be added to ARCH_*
>>>> dependencies, as often only one ARCH can be selected which prevents
>>>> compile testing drivers with various multiple architecture deps in
>>>> one compile test.
>>>>
>>>> Normal dependencies, on the other hand, can simply be enabled if one
>>>> wants to compile test its dependent drivers. In this case, TI_SCI_PROTOCOL
>>>> cannot be enabled as it has a dependency up the chain that doesn't
>>>> allow selecting when not on a TI platform. We can fix that as I posted
>>>> here[0]. With that fix in, this line can be simply become:
>>>>
>>>> depends on TI_SCI_PROTOCOL
>>>
>>> From the above and the follow-on conversation with Nishanth, should I understand
>>> you are working on a patchset to address this issue? If not I will apply Arnd's
>>> patch. People are sending different fix [1] - the issue needs to be addressed
>>> well before the end of the cycle.
>>>
>>
>> This is a bit complex as it touches multiple subsystems. You should take Arnd's
>> patch. This will fix this for M4, I will then add a follow on patch doing the same
>> for the other two remoteproc drivers (DSP and R5).
>>
>> When my series here[0] goes in I will then send a final patch removing the depends
>> TI_SCI_PROTOCOL=n oddness from all 3 drivers. This final step does not need to happen
>> this cycle though, only the first two steps are needed to prevent any further compile
>> test issues.
>>
>
> I have applied Arnd's patch.
>
Follow up series sent: https://lore.kernel.org/lkml/20241016164141.93401-1-afd@ti.com/
Andrew
>> Andrew
>>
>> [0] https://lore.kernel.org/lkml/20241015213322.2649011-1-afd@ti.com/
>>
>>> [1]. https://lore.kernel.org/linux-arm-kernel/20241016013922.1392290-1-zengheng4@huawei.com/T/
>>>
>>>>
>>>> Andrew
>>>>
>>>> [0] https://lore.kernel.org/lkml/20241014144821.15094-1-afd@ti.com/
>>>>
>>>>> + depends on OMAP2PLUS_MBOX
>>>>> help
>>>>> Say m here to support TI's M4 remote processor subsystems
>>>>> on various TI K3 family of SoCs through the remote processor
On Mon, Oct 14, 2024, at 14:56, Andrew Davis wrote:
> On 10/7/24 8:23 AM, Arnd Bergmann wrote:
>> config TI_K3_M4_REMOTEPROC
>> tristate "TI K3 M4 remoteproc support"
>> - depends on ARCH_OMAP2PLUS || ARCH_K3
>> - select MAILBOX
>> - select OMAP2PLUS_MBOX
>> + depends on ARCH_K3 || COMPILE_TEST
>> + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
>
> This line is odd. IMHO "COMPILE_TEST" should only be added to ARCH_*
> dependencies, as often only one ARCH can be selected which prevents
> compile testing drivers with various multiple architecture deps in
> one compile test.
I generally agree, but the TI_SCI_PROTOCOL interface
definitions that were added in aa276781a64a ("firmware: Add basic
support for TI System Control Interface (TI-SCI) protocol")
appear to explicitly support the case of compile-testing.
See also 13678f3feb30 ("reset: ti-sci: honor TI_SCI_PROTOCOL
setting when not COMPILE_TEST").
> Normal dependencies, on the other hand, can simply be enabled if one
> wants to compile test its dependent drivers. In this case, TI_SCI_PROTOCOL
> cannot be enabled as it has a dependency up the chain that doesn't
> allow selecting when not on a TI platform. We can fix that as I posted
> here[0]. With that fix in, this line can be simply become:
>
> depends on TI_SCI_PROTOCOL
That's certainly fine with me, but if we do this, I would suggest
also removing the stub functions from
include/linux/soc/ti/ti_sci_protocol.h, and the dependency in the
reset driver.
Adding Nishanth Menon to Cc, to see if he has a preference.
Arnd
On 15:43-20241014, Arnd Bergmann wrote:
> On Mon, Oct 14, 2024, at 14:56, Andrew Davis wrote:
> > On 10/7/24 8:23 AM, Arnd Bergmann wrote:
> >> config TI_K3_M4_REMOTEPROC
> >> tristate "TI K3 M4 remoteproc support"
> >> - depends on ARCH_OMAP2PLUS || ARCH_K3
> >> - select MAILBOX
> >> - select OMAP2PLUS_MBOX
> >> + depends on ARCH_K3 || COMPILE_TEST
> >> + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
> >
> > This line is odd. IMHO "COMPILE_TEST" should only be added to ARCH_*
> > dependencies, as often only one ARCH can be selected which prevents
> > compile testing drivers with various multiple architecture deps in
> > one compile test.
>
> I generally agree, but the TI_SCI_PROTOCOL interface
> definitions that were added in aa276781a64a ("firmware: Add basic
> support for TI System Control Interface (TI-SCI) protocol")
> appear to explicitly support the case of compile-testing.
>
> See also 13678f3feb30 ("reset: ti-sci: honor TI_SCI_PROTOCOL
> setting when not COMPILE_TEST").
>
> > Normal dependencies, on the other hand, can simply be enabled if one
> > wants to compile test its dependent drivers. In this case, TI_SCI_PROTOCOL
> > cannot be enabled as it has a dependency up the chain that doesn't
> > allow selecting when not on a TI platform. We can fix that as I posted
> > here[0]. With that fix in, this line can be simply become:
> >
> > depends on TI_SCI_PROTOCOL
>
> That's certainly fine with me, but if we do this, I would suggest
> also removing the stub functions from
> include/linux/soc/ti/ti_sci_protocol.h, and the dependency in the
> reset driver.
>
> Adding Nishanth Menon to Cc, to see if he has a preference.
>
> Arnd
While I am OK to do the cleanups and make the drivers independent,
I am also looking to make TISCI stuff independent and be a module
itself. So, dropping the stubs will probably get in the way as we move
ahead with those plans.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
On 10/14/24 11:52 AM, Nishanth Menon wrote:
> On 15:43-20241014, Arnd Bergmann wrote:
>> On Mon, Oct 14, 2024, at 14:56, Andrew Davis wrote:
>>> On 10/7/24 8:23 AM, Arnd Bergmann wrote:
>>>> config TI_K3_M4_REMOTEPROC
>>>> tristate "TI K3 M4 remoteproc support"
>>>> - depends on ARCH_OMAP2PLUS || ARCH_K3
>>>> - select MAILBOX
>>>> - select OMAP2PLUS_MBOX
>>>> + depends on ARCH_K3 || COMPILE_TEST
>>>> + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
>>>
>>> This line is odd. IMHO "COMPILE_TEST" should only be added to ARCH_*
>>> dependencies, as often only one ARCH can be selected which prevents
>>> compile testing drivers with various multiple architecture deps in
>>> one compile test.
>>
>> I generally agree, but the TI_SCI_PROTOCOL interface
>> definitions that were added in aa276781a64a ("firmware: Add basic
>> support for TI System Control Interface (TI-SCI) protocol")
>> appear to explicitly support the case of compile-testing.
>>
>> See also 13678f3feb30 ("reset: ti-sci: honor TI_SCI_PROTOCOL
>> setting when not COMPILE_TEST").
>>
>>> Normal dependencies, on the other hand, can simply be enabled if one
>>> wants to compile test its dependent drivers. In this case, TI_SCI_PROTOCOL
>>> cannot be enabled as it has a dependency up the chain that doesn't
>>> allow selecting when not on a TI platform. We can fix that as I posted
>>> here[0]. With that fix in, this line can be simply become:
>>>
>>> depends on TI_SCI_PROTOCOL
>>
>> That's certainly fine with me, but if we do this, I would suggest
>> also removing the stub functions from
>> include/linux/soc/ti/ti_sci_protocol.h, and the dependency in the
>> reset driver.
>>
>> Adding Nishanth Menon to Cc, to see if he has a preference.
>>
>> Arnd
>
> While I am OK to do the cleanups and make the drivers independent,
> I am also looking to make TISCI stuff independent and be a module
> itself. So, dropping the stubs will probably get in the way as we move
> ahead with those plans.
>
Not sure how having the stubs would help with that. TI_SCI_PROTOCOL
can already be built as a module. The stubs are what cause this
issue here. When built as a module, the stubs are not active so any
driver that depends on this module that is built-in will cause a
link error.
Stubs only make sense for optional components, like GPIOLIB, where
the driver using that component can continue when it is not available.
For all drivers that depend on TI-SCI it is not optional. The dependent
driver *will* fail to probe and error out. These stubs do nothing, and
I'd like to just remove them.
Andrew
On 12:26-20241014, Andrew Davis wrote: > Stubs only make sense for optional components, like GPIOLIB, where > the driver using that component can continue when it is not available. > For all drivers that depend on TI-SCI it is not optional. The dependent > driver *will* fail to probe and error out. These stubs do nothing, and > I'd like to just remove them. Fair enough. I'd like to see a series where the drivers have been converted to modules and we remove the "select" from arch/arm64/Kconfig.platforms - we can then drop the stubs once the modularization is complete. -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Hi Arnd,
On Mon, Oct 07, 2024 at 01:23:57PM +0000, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The k3-m4 remoteproc driver was merged with incorrect dependencies.
> Despite multiple people trying to fix this, the version 6.12-rc2
> remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m
> when the driver is built-in.
>
> arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
> ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
>
> Fix the dependency again to make it work in all configurations.
> The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers
> dependencies. The link failure can be avoided with a simple 'depends
> do, so turn that into the same 'depends' to ensure we get no circular
> on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what
> we use elsehwere. On the other hand, building for OMAP2PLUS makes
> no sense since the hardware only exists on K3.
>
> Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
> Fixes: ba0c0cb56f22 ("remoteproc: k3-m4: use the proper dependencies")
> Fixes: 54595f2807d2 ("mailbox, remoteproc: omap2+: fix compile testing")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/remoteproc/Kconfig | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 955e4e38477e..62f8548fb46a 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -341,9 +341,9 @@ config TI_K3_DSP_REMOTEPROC
>
> config TI_K3_M4_REMOTEPROC
> tristate "TI K3 M4 remoteproc support"
> - depends on ARCH_OMAP2PLUS || ARCH_K3
> - select MAILBOX
> - select OMAP2PLUS_MBOX
> + depends on ARCH_K3 || COMPILE_TEST
> + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
> + depends on OMAP2PLUS_MBOX
I have tested this patch with CONFIG_TI_SCI_PROTOCOL=m on Arm and allmodconfig on
x86-64 - both compilation work.
I can apply this patch as is or you can send me another one with the
modifications you did for TI_K3_DSP_REMOTEPROC and TI_K3_R5_REMOTEPROC in your
previous [1] attempt to fix this.
Thanks,
Mathieu
[1]. https://lore.kernel.org/all/20240909203825.1666947-1-arnd@kernel.org/
> help
> Say m here to support TI's M4 remote processor subsystems
> on various TI K3 family of SoCs through the remote processor
> --
> 2.39.2
>
On Mon, Oct 07, 2024 at 01:23:57PM +0000, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The k3-m4 remoteproc driver was merged with incorrect dependencies.
> Despite multiple people trying to fix this, the version 6.12-rc2
> remains broken and causes a build failure with CONFIG_TI_SCI_PROTOCOL=m
> when the driver is built-in.
>
(Sigh)
I will do my own testing and will get back to you.
> arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
> ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
>
> Fix the dependency again to make it work in all configurations.
> The 'select OMAP2PLUS_MBOX' no longer matches what the other drivers
> dependencies. The link failure can be avoided with a simple 'depends
> do, so turn that into the same 'depends' to ensure we get no circular
> on TI_SCI_PROTOCOL', but the extra COMPILE_TEST alternative is what
> we use elsehwere. On the other hand, building for OMAP2PLUS makes
> no sense since the hardware only exists on K3.
>
> Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
> Fixes: ba0c0cb56f22 ("remoteproc: k3-m4: use the proper dependencies")
> Fixes: 54595f2807d2 ("mailbox, remoteproc: omap2+: fix compile testing")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> drivers/remoteproc/Kconfig | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 955e4e38477e..62f8548fb46a 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -341,9 +341,9 @@ config TI_K3_DSP_REMOTEPROC
>
> config TI_K3_M4_REMOTEPROC
> tristate "TI K3 M4 remoteproc support"
> - depends on ARCH_OMAP2PLUS || ARCH_K3
> - select MAILBOX
> - select OMAP2PLUS_MBOX
> + depends on ARCH_K3 || COMPILE_TEST
> + depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
> + depends on OMAP2PLUS_MBOX
> help
> Say m here to support TI's M4 remote processor subsystems
> on various TI K3 family of SoCs through the remote processor
> --
> 2.39.2
>
© 2016 - 2024 Red Hat, Inc.