From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
The HDaudio mlink support makes it more logical to couple interrupt
enabling/disabling with power-up/down sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
drivers/soundwire/intel_ace2x.c | 7 +++++++
sound/soc/sof/intel/hda-dsp.c | 5 -----
sound/soc/sof/intel/hda.c | 2 --
sound/soc/sof/intel/lnl.c | 10 ----------
4 files changed, 7 insertions(+), 17 deletions(-)
diff --git a/drivers/soundwire/intel_ace2x.c b/drivers/soundwire/intel_ace2x.c
index fff312c6968d..3084f0ac7159 100644
--- a/drivers/soundwire/intel_ace2x.c
+++ b/drivers/soundwire/intel_ace2x.c
@@ -175,6 +175,9 @@ static int intel_link_power_up(struct sdw_intel *sdw)
__func__, ret);
goto out;
}
+
+ hdac_bus_eml_enable_interrupt_unlocked(sdw->link_res->hbus, true,
+ AZX_REG_ML_LEPTR_ID_SDW, true);
}
*shim_mask |= BIT(link_id);
@@ -201,6 +204,10 @@ static int intel_link_power_down(struct sdw_intel *sdw)
*shim_mask &= ~BIT(link_id);
+ if (!*shim_mask)
+ hdac_bus_eml_enable_interrupt_unlocked(sdw->link_res->hbus, true,
+ AZX_REG_ML_LEPTR_ID_SDW, false);
+
ret = hdac_bus_eml_sdw_power_down_unlocked(sdw->link_res->hbus, link_id);
if (ret < 0) {
dev_err(sdw->cdns.dev, "%s: hdac_bus_eml_sdw_power_down failed: %d\n",
diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c
index 4c88522d4048..6028a80418bb 100644
--- a/sound/soc/sof/intel/hda-dsp.c
+++ b/sound/soc/sof/intel/hda-dsp.c
@@ -858,7 +858,6 @@ static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend)
static int hda_resume(struct snd_sof_dev *sdev, bool runtime_resume)
{
- const struct sof_intel_dsp_desc *chip;
int ret;
/* display codec must be powered before link reset */
@@ -891,10 +890,6 @@ static int hda_resume(struct snd_sof_dev *sdev, bool runtime_resume)
hda_dsp_ctrl_ppcap_int_enable(sdev, true);
}
- chip = get_chip_info(sdev->pdata);
- if (chip && chip->hw_ip_version >= SOF_INTEL_ACE_2_0)
- hda_sdw_int_enable(sdev, true);
-
cleanup:
/* display codec can powered off after controller init */
hda_codec_i915_display_power(sdev, false);
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 70fc08c8fc99..e4cb4ffc7270 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -866,8 +866,6 @@ int hda_dsp_probe(struct snd_sof_dev *sdev)
dev_err(sdev->dev, "could not startup SoundWire links\n");
goto disable_pp_cap;
}
-
- hda_sdw_int_enable(sdev, true);
}
init_waitqueue_head(&hdev->waitq);
diff --git a/sound/soc/sof/intel/lnl.c b/sound/soc/sof/intel/lnl.c
index 3d5a1f8b17e5..e3c4b4a0d705 100644
--- a/sound/soc/sof/intel/lnl.c
+++ b/sound/soc/sof/intel/lnl.c
@@ -192,16 +192,8 @@ static bool lnl_dsp_check_sdw_irq(struct snd_sof_dev *sdev)
return hdac_bus_eml_check_interrupt(bus, true, AZX_REG_ML_LEPTR_ID_SDW);
}
-static void lnl_enable_sdw_irq(struct snd_sof_dev *sdev, bool enable)
-{
- struct hdac_bus *bus = sof_to_bus(sdev);
-
- hdac_bus_eml_enable_interrupt(bus, true, AZX_REG_ML_LEPTR_ID_SDW, enable);
-}
-
static int lnl_dsp_disable_interrupts(struct snd_sof_dev *sdev)
{
- lnl_enable_sdw_irq(sdev, false);
mtl_disable_ipc_interrupts(sdev);
return mtl_enable_interrupts(sdev, false);
}
@@ -237,7 +229,6 @@ const struct sof_intel_dsp_desc lnl_chip_info = {
.ssp_count = MTL_SSP_COUNT,
.d0i3_offset = MTL_HDA_VS_D0I3C,
.read_sdw_lcount = hda_sdw_check_lcount_ext,
- .enable_sdw_irq = lnl_enable_sdw_irq,
.check_sdw_irq = lnl_dsp_check_sdw_irq,
.check_sdw_wakeen_irq = lnl_sdw_check_wakeen_irq,
.sdw_process_wakeen = hda_sdw_process_wakeen_common,
@@ -262,7 +253,6 @@ const struct sof_intel_dsp_desc ptl_chip_info = {
.ssp_count = MTL_SSP_COUNT,
.d0i3_offset = MTL_HDA_VS_D0I3C,
.read_sdw_lcount = hda_sdw_check_lcount_ext,
- .enable_sdw_irq = lnl_enable_sdw_irq,
.check_sdw_irq = lnl_dsp_check_sdw_irq,
.check_sdw_wakeen_irq = lnl_sdw_check_wakeen_irq,
.check_ipc_irq = mtl_dsp_check_ipc_irq,
--
2.43.0
On 07-10-24, 20:12, Bard Liao wrote: > From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > > The HDaudio mlink support makes it more logical to couple interrupt > enabling/disabling with power-up/down sequences. Acked-by: Vinod Koul <vkoul@kernel.org> -- ~Vinod
© 2016 - 2024 Red Hat, Inc.