Currently this driver prints this line with what looks like
a rogue format specifier when the device is probed:
[    2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx

Change the printk() for netdev_info() and move it after the
registration has completed so it prints out the name of the
interface properly.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
---
 drivers/net/ethernet/amd/mvme147.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/amd/mvme147.c b/drivers/net/ethernet/amd/mvme147.c
index c156566c0906..f19b04b92fa9 100644
--- a/drivers/net/ethernet/amd/mvme147.c
+++ b/drivers/net/ethernet/amd/mvme147.c
@@ -105,10 +105,6 @@ static struct net_device * __init mvme147lance_probe(void)
 	macaddr[3] = address&0xff;
 	eth_hw_addr_set(dev, macaddr);
 
-	printk("%s: MVME147 at 0x%08lx, irq %d, Hardware Address %pM\n",
-	       dev->name, dev->base_addr, MVME147_LANCE_IRQ,
-	       dev->dev_addr);
-
 	lp = netdev_priv(dev);
 	lp->ram = __get_dma_pages(GFP_ATOMIC, 3);	/* 32K */
 	if (!lp->ram) {
@@ -138,6 +134,9 @@ static struct net_device * __init mvme147lance_probe(void)
 		return ERR_PTR(err);
 	}
 
+	netdev_info(dev, "MVME147 at 0x%08lx, irq %d, Hardware Address %pM\n",
+		    dev->base_addr, MVME147_LANCE_IRQ, dev->dev_addr);
+
 	return dev;
 }
 
-- 
2.43.0

On Mon, Oct 07, 2024 at 07:43:17PM +0900, Daniel Palmer wrote:
> Currently this driver prints this line with what looks like
> a rogue format specifier when the device is probed:
> [    2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx
> 
> Change the printk() for netdev_info() and move it after the
> registration has completed so it prints out the name of the
> interface properly.
> 
> Signed-off-by: Daniel Palmer <daniel@0x0f.com>

Reviewed-by: Simon Horman <horms@kernel.org>