Add the power domains and OPP tables to all the QUP-related UART/I2C/SPI
nodes to ensure that we vote for the necessary performance states. Similar
to sm8350.dtsi, the OPPs depend on the QUP instance. The first two
instances in each geniqup group need &rpmhpd_opp_svs starting at 120MHz,
the others already starting at 100MHz. I2C always runs at a lower clock
frequency and therefore uses a fixed vote.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 178 +++++++++++++++++++++++++++++++++
1 file changed, 178 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 0e6802c1d2d8..06d27c65dc11 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -679,6 +679,34 @@ smem_mem: smem@ffe00000 {
};
};
+ qup_opp_table_100mhz: opp-table-qup100mhz {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
+ qup_opp_table_120mhz: opp-table-qup120mhz {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-120000000 {
+ opp-hz = /bits/ 64 <120000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
smp2p-adsp {
compatible = "qcom,smp2p";
@@ -833,6 +861,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
<&gpi_dma2 1 0 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -866,6 +897,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_120mhz>;
+
dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
<&gpi_dma2 1 0 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -899,6 +933,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
<&gpi_dma2 1 1 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -932,6 +969,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_120mhz>;
+
dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
<&gpi_dma2 1 1 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -965,6 +1005,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
<&gpi_dma2 1 2 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -998,6 +1041,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
<&gpi_dma2 1 2 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1031,6 +1077,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
<&gpi_dma2 1 3 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1064,6 +1113,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
<&gpi_dma2 1 3 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1097,6 +1149,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
<&gpi_dma2 1 4 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1130,6 +1185,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
<&gpi_dma2 1 4 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1163,6 +1221,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
<&gpi_dma2 1 5 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1196,6 +1257,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
<&gpi_dma2 1 5 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1226,6 +1290,9 @@ &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
pinctrl-0 = <&qup_uart21_default>;
pinctrl-names = "default";
@@ -1251,6 +1318,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
<&gpi_dma2 1 6 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1284,6 +1354,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
<&gpi_dma2 1 6 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1317,6 +1390,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
<&gpi_dma2 1 7 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1350,6 +1426,9 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
<&gpi_dma2 1 7 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1427,6 +1506,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1460,6 +1542,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_120mhz>;
+
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
<&gpi_dma1 1 0 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1493,6 +1578,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1526,6 +1614,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_120mhz>;
+
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
<&gpi_dma1 1 1 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1559,6 +1650,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1592,6 +1686,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
<&gpi_dma1 1 2 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1625,6 +1722,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1658,6 +1758,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
<&gpi_dma1 1 3 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1691,6 +1794,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1724,6 +1830,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
<&gpi_dma1 1 4 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1757,6 +1866,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1790,6 +1902,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
<&gpi_dma1 1 5 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1823,6 +1938,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
<&gpi_dma1 1 6 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1856,6 +1974,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
<&gpi_dma1 1 6 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1889,6 +2010,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
<&gpi_dma1 1 7 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -1922,6 +2046,9 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
<&gpi_dma1 1 7 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -1998,6 +2125,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2031,6 +2161,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_120mhz>;
+
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2064,6 +2197,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2097,6 +2233,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_120mhz>;
+
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2130,6 +2269,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2160,6 +2302,9 @@ &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
interconnect-names = "qup-core",
"qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
pinctrl-0 = <&qup_uart2_default>;
pinctrl-names = "default";
@@ -2185,6 +2330,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2218,6 +2366,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2251,6 +2402,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2284,6 +2438,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2317,6 +2474,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2350,6 +2510,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2383,6 +2546,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2416,6 +2582,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
<&gpi_dma0 1 6 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2449,6 +2618,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
<&gpi_dma0 1 6 QCOM_GPI_SPI>;
dma-names = "tx",
@@ -2482,6 +2654,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
<&gpi_dma0 1 7 QCOM_GPI_I2C>;
dma-names = "tx",
@@ -2515,6 +2690,9 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
"qup-config",
"qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+
dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
<&gpi_dma0 1 7 QCOM_GPI_SPI>;
dma-names = "tx",
--
2.46.0On Mon, Oct 07, 2024 at 08:22:25PM +0200, Stephan Gerhold wrote: > Add the power domains and OPP tables to all the QUP-related UART/I2C/SPI > nodes to ensure that we vote for the necessary performance states. Similar > to sm8350.dtsi, the OPPs depend on the QUP instance. The first two > instances in each geniqup group need &rpmhpd_opp_svs starting at 120MHz, > the others already starting at 100MHz. I2C always runs at a lower clock > frequency and therefore uses a fixed vote. > > Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Looks good to me. Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Johan
© 2016 - 2024 Red Hat, Inc.