[PATCH v4 03/28] cxl/cdat: Use %pra for dpa range outputs

Ira Weiny posted 28 patches 1 month, 2 weeks ago
There is a newer version of this series
[PATCH v4 03/28] cxl/cdat: Use %pra for dpa range outputs
Posted by Ira Weiny 1 month, 2 weeks ago
Now that there is a printk specifier for struct range use it in
debug output of CDAT data.

To: Petr Mladek <pmladek@suse.com>
To: Steven Rostedt <rostedt@goodmis.org>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Rasmus Villemoes <linux@rasmusvillemoes.dk>
To: Sergey Senozhatsky <senozhatsky@chromium.org>
To: Jonathan Corbet <corbet@lwn.net> (maintainer:DOCUMENTATION)
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
---
 drivers/cxl/core/cdat.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/cxl/core/cdat.c b/drivers/cxl/core/cdat.c
index ef1621d40f05..438869df241a 100644
--- a/drivers/cxl/core/cdat.c
+++ b/drivers/cxl/core/cdat.c
@@ -247,8 +247,8 @@ static void update_perf_entry(struct device *dev, struct dsmas_entry *dent,
 	dpa_perf->dpa_range = dent->dpa_range;
 	dpa_perf->qos_class = dent->qos_class;
 	dev_dbg(dev,
-		"DSMAS: dpa: %#llx qos: %d read_bw: %d write_bw %d read_lat: %d write_lat: %d\n",
-		dent->dpa_range.start, dpa_perf->qos_class,
+		"DSMAS: dpa: %pra qos: %d read_bw: %d write_bw %d read_lat: %d write_lat: %d\n",
+		&dent->dpa_range, dpa_perf->qos_class,
 		dent->coord[ACCESS_COORDINATE_CPU].read_bandwidth,
 		dent->coord[ACCESS_COORDINATE_CPU].write_bandwidth,
 		dent->coord[ACCESS_COORDINATE_CPU].read_latency,
@@ -279,8 +279,8 @@ static void cxl_memdev_set_qos_class(struct cxl_dev_state *cxlds,
 			 range_contains(&pmem_range, &dent->dpa_range))
 			update_perf_entry(dev, dent, &mds->pmem_perf);
 		else
-			dev_dbg(dev, "no partition for dsmas dpa: %#llx\n",
-				dent->dpa_range.start);
+			dev_dbg(dev, "no partition for dsmas dpa: %pra\n",
+				&dent->dpa_range);
 	}
 }
 

-- 
2.46.0
Re: [PATCH v4 03/28] cxl/cdat: Use %pra for dpa range outputs
Posted by Fan Ni 1 month, 2 weeks ago
On Mon, Oct 07, 2024 at 06:16:09PM -0500, Ira Weiny wrote:
> Now that there is a printk specifier for struct range use it in
> debug output of CDAT data.
> 
> To: Petr Mladek <pmladek@suse.com>
> To: Steven Rostedt <rostedt@goodmis.org>
> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> To: Rasmus Villemoes <linux@rasmusvillemoes.dk>
> To: Sergey Senozhatsky <senozhatsky@chromium.org>
> To: Jonathan Corbet <corbet@lwn.net> (maintainer:DOCUMENTATION)
> Cc: linux-doc@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org (open list)
> Signed-off-by: Ira Weiny <ira.weiny@intel.com>
> ---

Reviewed-by: Fan Ni <fan.ni@samsung.com>

>  drivers/cxl/core/cdat.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/cxl/core/cdat.c b/drivers/cxl/core/cdat.c
> index ef1621d40f05..438869df241a 100644
> --- a/drivers/cxl/core/cdat.c
> +++ b/drivers/cxl/core/cdat.c
> @@ -247,8 +247,8 @@ static void update_perf_entry(struct device *dev, struct dsmas_entry *dent,
>  	dpa_perf->dpa_range = dent->dpa_range;
>  	dpa_perf->qos_class = dent->qos_class;
>  	dev_dbg(dev,
> -		"DSMAS: dpa: %#llx qos: %d read_bw: %d write_bw %d read_lat: %d write_lat: %d\n",
> -		dent->dpa_range.start, dpa_perf->qos_class,
> +		"DSMAS: dpa: %pra qos: %d read_bw: %d write_bw %d read_lat: %d write_lat: %d\n",
> +		&dent->dpa_range, dpa_perf->qos_class,
>  		dent->coord[ACCESS_COORDINATE_CPU].read_bandwidth,
>  		dent->coord[ACCESS_COORDINATE_CPU].write_bandwidth,
>  		dent->coord[ACCESS_COORDINATE_CPU].read_latency,
> @@ -279,8 +279,8 @@ static void cxl_memdev_set_qos_class(struct cxl_dev_state *cxlds,
>  			 range_contains(&pmem_range, &dent->dpa_range))
>  			update_perf_entry(dev, dent, &mds->pmem_perf);
>  		else
> -			dev_dbg(dev, "no partition for dsmas dpa: %#llx\n",
> -				dent->dpa_range.start);
> +			dev_dbg(dev, "no partition for dsmas dpa: %pra\n",
> +				&dent->dpa_range);
>  	}
>  }
>  
> 
> -- 
> 2.46.0
> 

-- 
Fan Ni
Re: [PATCH v4 03/28] cxl/cdat: Use %pra for dpa range outputs
Posted by Jonathan Cameron 1 month, 2 weeks ago
On Mon, 07 Oct 2024 18:16:09 -0500
Ira Weiny <ira.weiny@intel.com> wrote:

> Now that there is a printk specifier for struct range use it in
> debug output of CDAT data.
> 
> To: Petr Mladek <pmladek@suse.com>
> To: Steven Rostedt <rostedt@goodmis.org>
> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> To: Rasmus Villemoes <linux@rasmusvillemoes.dk>
> To: Sergey Senozhatsky <senozhatsky@chromium.org>
> To: Jonathan Corbet <corbet@lwn.net> (maintainer:DOCUMENTATION)
> Cc: linux-doc@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org (open list)
> Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>