From: Sricharan Ramabadhran <quic_srichara@quicinc.com>

Add initial device tree support for the Qualcomm IPQ5424 SoC and
rdp466 board.

Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile           |   1 +
 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts |  59 ++++
 arch/arm64/boot/dts/qcom/ipq5424.dtsi       | 291 ++++++++++++++++++++
 3 files changed, 351 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5424.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index ae002c7cf126..652cc4b6815f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp441.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5424-rdp466.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
new file mode 100644
index 000000000000..d4d31026a026
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5424 RDP466 board device tree source
+ *
+ * Copyright (c) 2024 The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5424.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5424 RDP466";
+	compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424";
+
+	aliases {
+		serial0 = &uart1;
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <24000000>;
+};
+
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
new file mode 100644
index 000000000000..76af0d87e9a8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ5424 device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,ipq5424-gcc.h>
+#include <dt-bindings/reset/qcom,ipq5424-gcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2_0>;
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+
+				l3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x100>;
+			next-level-cache = <&l2_100>;
+
+			l2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x200>;
+			next-level-cache = <&l2_200>;
+
+			l2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x300>;
+			next-level-cache = <&l2_300>;
+
+			l2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-dsu {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz@8a600000 {
+			reg = <0x0 0x8a600000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5424-tlmm";
+			reg = <0 0x01000000 0 0x300000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 50>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart1_pins: uart1-state {
+				pins = "gpio43", "gpio44";
+				function = "uart1";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq5424-gcc";
+			reg = <0 0x01800000 0 0x40000>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
+		qupv3: geniqup@1ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x01ac0000 0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>,
+				 <&gcc GCC_QUPV3_AHB_SLV_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			uart1: serial@1a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x01a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_UART1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq5424-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x07804000 0 0x1000>, <0 0x07805000 0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0xf200000 0 0x10000>, /* GICD */
+			      <0 0xf240000 0 0x80000>; /* GICR * 4 regions */
+			#interrupt-cells = <0x3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			mbi-ranges = <672 128>;
+			msi-controller;
+		};
+
+		timer@f420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0xf420000 0 0x1000>;
+			ranges = <0 0 0 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@f421000 {
+				reg = <0xf421000 0x1000>,
+				      <0xf422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@f423000 {
+				reg = <0xf423000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@f425000 {
+				reg = <0xf425000 0x1000>,
+				      <0xf426000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@f427000 {
+				reg = <0xf427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@f429000 {
+				reg = <0xf429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@f42b000 {
+				reg = <0xf42b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@f42d000 {
+				reg = <0xf42d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
-- 
2.34.1