The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
(voltage and current), 16-Bit ADC with an I2C Interface.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
drivers/iio/adc/Kconfig | 10 ++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/gehc-pmc-adc.c | 227 +++++++++++++++++++++++++++++++++
3 files changed, 238 insertions(+)
create mode 100644 drivers/iio/adc/gehc-pmc-adc.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 97ece1a4b7e3..87b20f972c25 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -571,6 +571,16 @@ config FSL_MX25_ADC
Generic Conversion Queue driver used for general purpose ADC in the
MX25. This driver supports single measurements using the MX25 ADC.
+config GEHC_PMC_ADC
+ tristate "GE HealthCare PMC ADC driver"
+ depends on I2C
+ help
+ Say yes here to build support for the GE HealthCare PMC 16-bit
+ 16-Channel ADC.
+
+ To compile this driver as a module, choose M here: the module will be
+ called gehc-pmc-adc.
+
config HI8435
tristate "Holt Integrated Circuits HI-8435 threshold detector"
select IIO_TRIGGERED_EVENT
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 7b91cd98c0e0..66b36dfe9a28 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_ENVELOPE_DETECTOR) += envelope-detector.o
obj-$(CONFIG_EP93XX_ADC) += ep93xx_adc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o
+obj-$(CONFIG_GEHC_PMC_ADC) += gehc-pmc-adc.o
obj-$(CONFIG_HI8435) += hi8435.o
obj-$(CONFIG_HX711) += hx711.o
obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
diff --git a/drivers/iio/adc/gehc-pmc-adc.c b/drivers/iio/adc/gehc-pmc-adc.c
new file mode 100644
index 000000000000..c70a93f4a61b
--- /dev/null
+++ b/drivers/iio/adc/gehc-pmc-adc.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The GE HealthCare PMC ADC is a 16-Channel (Voltage and current), 16-Bit
+ * ADC with an I2C Interface.
+ *
+ * Copyright (C) 2024, GE HealthCare
+ *
+ * Authors:
+ * Herve Codina <herve.codina@bootlin.com>
+ */
+#include <dt-bindings/iio/adc/gehc,pmc-adc.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+struct pmc_adc {
+ struct i2c_client *client;
+};
+
+#define PMC_ADC_CMD_REQUEST_PROTOCOL_VERSION 0x01
+#define PMC_ADC_CMD_READ_VOLTAGE(_ch) (0x10 | (_ch))
+#define PMC_ADC_CMD_READ_CURRENT(_ch) (0x20 | (_ch))
+
+#define PMC_ADC_VOLTAGE_CHANNEL(_ch, _ds_name) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_ch), \
+ .address = PMC_ADC_CMD_READ_VOLTAGE(_ch), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+ .datasheet_name = (_ds_name), \
+}
+
+#define PMC_ADC_CURRENT_CHANNEL(_ch, _ds_name) { \
+ .type = IIO_CURRENT, \
+ .indexed = 1, \
+ .channel = (_ch), \
+ .address = PMC_ADC_CMD_READ_CURRENT(_ch), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+ .datasheet_name = (_ds_name), \
+}
+
+static const struct iio_chan_spec pmc_adc_channels[] = {
+ PMC_ADC_VOLTAGE_CHANNEL(0, "CH0_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(1, "CH1_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(2, "CH2_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(3, "CH3_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(4, "CH4_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(5, "CH5_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(6, "CH6_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(7, "CH7_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(8, "CH8_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(9, "CH9_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(10, "CH10_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(11, "CH11_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(12, "CH12_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(13, "CH13_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(14, "CH14_V"),
+ PMC_ADC_VOLTAGE_CHANNEL(15, "CH15_V"),
+
+ PMC_ADC_CURRENT_CHANNEL(0, "CH0_I"),
+ PMC_ADC_CURRENT_CHANNEL(1, "CH1_I"),
+ PMC_ADC_CURRENT_CHANNEL(2, "CH2_I"),
+ PMC_ADC_CURRENT_CHANNEL(3, "CH3_I"),
+ PMC_ADC_CURRENT_CHANNEL(4, "CH4_I"),
+ PMC_ADC_CURRENT_CHANNEL(5, "CH5_I"),
+ PMC_ADC_CURRENT_CHANNEL(6, "CH6_I"),
+ PMC_ADC_CURRENT_CHANNEL(7, "CH7_I"),
+ PMC_ADC_CURRENT_CHANNEL(8, "CH8_I"),
+ PMC_ADC_CURRENT_CHANNEL(9, "CH9_I"),
+ PMC_ADC_CURRENT_CHANNEL(10, "CH10_I"),
+ PMC_ADC_CURRENT_CHANNEL(11, "CH11_I"),
+ PMC_ADC_CURRENT_CHANNEL(12, "CH12_I"),
+ PMC_ADC_CURRENT_CHANNEL(13, "CH13_I"),
+ PMC_ADC_CURRENT_CHANNEL(14, "CH14_I"),
+ PMC_ADC_CURRENT_CHANNEL(15, "CH15_I"),
+};
+
+static int pmc_adc_read_raw_ch(struct pmc_adc *pmc_adc, u8 cmd, int *val)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_word_swapped(pmc_adc->client, cmd);
+ if (ret < 0) {
+ dev_err(&pmc_adc->client->dev, "i2c read word failed (%d)\n", ret);
+ return ret;
+ }
+
+ *val = sign_extend32(ret, 15);
+ return 0;
+}
+
+static int pmc_adc_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct pmc_adc *pmc_adc = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ /* Values are directly read in mV or mA */
+ ret = pmc_adc_read_raw_ch(pmc_adc, chan->address, val);
+ if (ret)
+ return ret;
+ return IIO_VAL_INT;
+ }
+
+ return -EINVAL;
+}
+
+static int pmc_adc_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
+{
+ enum iio_chan_type expected_type;
+ unsigned int i;
+
+ /*
+ * args[0]: Acquisition type (i.e. voltage or current)
+ * args[1]: PMC ADC channel number
+ */
+ if (iiospec->nargs != 2)
+ return -EINVAL;
+
+ switch (iiospec->args[0]) {
+ case GEHC_PMC_ADC_VOLTAGE:
+ expected_type = IIO_VOLTAGE;
+ break;
+ case GEHC_PMC_ADC_CURRENT:
+ expected_type = IIO_CURRENT;
+ break;
+ default:
+ dev_err(&indio_dev->dev, "Invalid channel type %llu\n",
+ iiospec->args[0]);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < indio_dev->num_channels; i++)
+ if (indio_dev->channels[i].type == expected_type &&
+ indio_dev->channels[i].channel == iiospec->args[1])
+ return i;
+
+ dev_err(&indio_dev->dev, "Invalid channel type %llu number %llu\n",
+ iiospec->args[0], iiospec->args[1]);
+ return -EINVAL;
+}
+
+static const struct iio_info pmc_adc_info = {
+ .read_raw = pmc_adc_read_raw,
+ .fwnode_xlate = pmc_adc_fwnode_xlate,
+};
+
+static const char *const pmc_adc_regulator_names[] = {
+ "vdd",
+ "vdda",
+ "vddio",
+ "vref",
+};
+
+static int pmc_adc_probe(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev;
+ struct pmc_adc *pmc_adc;
+ struct clk *clk;
+ s32 val;
+ int ret;
+
+ ret = devm_regulator_bulk_get_enable(&client->dev, ARRAY_SIZE(pmc_adc_regulator_names),
+ pmc_adc_regulator_names);
+ if (ret)
+ return dev_err_probe(&client->dev, ret, "Failed to get regulators\n");
+
+ clk = devm_clk_get_optional_enabled(&client->dev, "osc");
+ if (IS_ERR(clk))
+ return dev_err_probe(&client->dev, PTR_ERR(clk), "Failed to get osc clock\n");
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*pmc_adc));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ pmc_adc = iio_priv(indio_dev);
+ pmc_adc->client = client;
+
+ val = i2c_smbus_read_byte_data(pmc_adc->client, PMC_ADC_CMD_REQUEST_PROTOCOL_VERSION);
+ if (val < 0)
+ return dev_err_probe(&client->dev, val, "Failed to get protocol version\n");
+
+ if (val != 0x01)
+ return dev_err_probe(&client->dev, -EINVAL,
+ "Unsupported protocol version 0x%02x\n", val);
+
+ indio_dev->name = "pmc_adc";
+ indio_dev->info = &pmc_adc_info;
+ indio_dev->channels = pmc_adc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(pmc_adc_channels);
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct of_device_id pmc_adc_of_match[] = {
+ { .compatible = "gehc,pmc-adc"},
+ { }
+};
+MODULE_DEVICE_TABLE(of, pmc_adc_of_match);
+
+static const struct i2c_device_id pmc_adc_id_table[] = {
+ { "pmc-adc" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pmc_adc_id_table);
+
+static struct i2c_driver pmc_adc_i2c_driver = {
+ .driver = {
+ .name = "pmc-adc",
+ .of_match_table = pmc_adc_of_match,
+ },
+ .id_table = pmc_adc_id_table,
+ .probe = pmc_adc_probe,
+};
+
+module_i2c_driver(pmc_adc_i2c_driver);
+
+MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
+MODULE_DESCRIPTION("GE HealthCare PMC ADC driver");
+MODULE_LICENSE("GPL");
--
2.46.1On 10/3/24 6:46 AM, Herve Codina wrote:
> The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
> (voltage and current), 16-Bit ADC with an I2C Interface.
>
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> ---
...
> +
> +static int pmc_adc_probe(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev;
> + struct pmc_adc *pmc_adc;
> + struct clk *clk;
> + s32 val;
> + int ret;
> +
> + ret = devm_regulator_bulk_get_enable(&client->dev, ARRAY_SIZE(pmc_adc_regulator_names),
> + pmc_adc_regulator_names);
> + if (ret)
> + return dev_err_probe(&client->dev, ret, "Failed to get regulators\n");
> +
> + clk = devm_clk_get_optional_enabled(&client->dev, "osc");
> + if (IS_ERR(clk))
> + return dev_err_probe(&client->dev, PTR_ERR(clk), "Failed to get osc clock\n");
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*pmc_adc));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + pmc_adc = iio_priv(indio_dev);
> + pmc_adc->client = client;
> +
> + val = i2c_smbus_read_byte_data(pmc_adc->client, PMC_ADC_CMD_REQUEST_PROTOCOL_VERSION);
> + if (val < 0)
> + return dev_err_probe(&client->dev, val, "Failed to get protocol version\n");
> +
> + if (val != 0x01)
> + return dev_err_probe(&client->dev, -EINVAL,
> + "Unsupported protocol version 0x%02x\n", val);
> +
> + indio_dev->name = "pmc_adc";
> + indio_dev->info = &pmc_adc_info;
> + indio_dev->channels = pmc_adc_channels;
> + indio_dev->num_channels = ARRAY_SIZE(pmc_adc_channels);
I don't think the core code actually checks this, but for
correctness we should add:
indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
With that...
Reviewed-by: David Lechner <dlechner@baylibre.com>
On Thu, 3 Oct 2024 08:39:54 -0500
David Lechner <dlechner@baylibre.com> wrote:
> On 10/3/24 6:46 AM, Herve Codina wrote:
> > The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
> > (voltage and current), 16-Bit ADC with an I2C Interface.
> >
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> > ---
>
> ...
>
>
> > +
> > +static int pmc_adc_probe(struct i2c_client *client)
> > +{
> > + struct iio_dev *indio_dev;
> > + struct pmc_adc *pmc_adc;
> > + struct clk *clk;
> > + s32 val;
> > + int ret;
> > +
> > + ret = devm_regulator_bulk_get_enable(&client->dev, ARRAY_SIZE(pmc_adc_regulator_names),
> > + pmc_adc_regulator_names);
> > + if (ret)
> > + return dev_err_probe(&client->dev, ret, "Failed to get regulators\n");
> > +
> > + clk = devm_clk_get_optional_enabled(&client->dev, "osc");
> > + if (IS_ERR(clk))
> > + return dev_err_probe(&client->dev, PTR_ERR(clk), "Failed to get osc clock\n");
> > +
> > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*pmc_adc));
> > + if (!indio_dev)
> > + return -ENOMEM;
> > +
> > + pmc_adc = iio_priv(indio_dev);
> > + pmc_adc->client = client;
> > +
> > + val = i2c_smbus_read_byte_data(pmc_adc->client, PMC_ADC_CMD_REQUEST_PROTOCOL_VERSION);
> > + if (val < 0)
> > + return dev_err_probe(&client->dev, val, "Failed to get protocol version\n");
> > +
> > + if (val != 0x01)
> > + return dev_err_probe(&client->dev, -EINVAL,
> > + "Unsupported protocol version 0x%02x\n", val);
> > +
> > + indio_dev->name = "pmc_adc";
> > + indio_dev->info = &pmc_adc_info;
> > + indio_dev->channels = pmc_adc_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(pmc_adc_channels);
>
> I don't think the core code actually checks this, but for
> correctness we should add:
>
> indio_dev->modes = INDIO_DIRECT_MODE;
True. This is a bit of an oddity of history :(
Maybe at somepoint we'll just drop this but for now it should be there.
Given everything else looks good I've added that whilst
applying the series. Applied to the togreg branch of iio.git and
pushed out as testing for 0-day to poke at it.
Thanks,
Jonathan
>
> > +
> > + return devm_iio_device_register(&client->dev, indio_dev);
> > +}
> > +
>
> With that...
>
> Reviewed-by: David Lechner <dlechner@baylibre.com>
>
On Thu, Oct 03, 2024 at 01:46:40PM +0200, Herve Codina wrote:
>
> The GE HealthCare PMC Analog to Digital Converter (ADC) is a 16-Channel
> (voltage and current), 16-Bit ADC with an I2C Interface.
>
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
> ---
> drivers/iio/adc/Kconfig | 10 ++
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/gehc-pmc-adc.c | 227 +++++++++++++++++++++++++++++++++
> 3 files changed, 238 insertions(+)
> create mode 100644 drivers/iio/adc/gehc-pmc-adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 97ece1a4b7e3..87b20f972c25 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -571,6 +571,16 @@ config FSL_MX25_ADC
> Generic Conversion Queue driver used for general purpose ADC in the
> MX25. This driver supports single measurements using the MX25 ADC.
>
> +config GEHC_PMC_ADC
> + tristate "GE HealthCare PMC ADC driver"
> + depends on I2C
> + help
> + Say yes here to build support for the GE HealthCare PMC 16-bit
> + 16-Channel ADC.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called gehc-pmc-adc.
> +
> config HI8435
> tristate "Holt Integrated Circuits HI-8435 threshold detector"
> select IIO_TRIGGERED_EVENT
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 7b91cd98c0e0..66b36dfe9a28 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -52,6 +52,7 @@ obj-$(CONFIG_ENVELOPE_DETECTOR) += envelope-detector.o
> obj-$(CONFIG_EP93XX_ADC) += ep93xx_adc.o
> obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
> obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o
> +obj-$(CONFIG_GEHC_PMC_ADC) += gehc-pmc-adc.o
> obj-$(CONFIG_HI8435) += hi8435.o
> obj-$(CONFIG_HX711) += hx711.o
> obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
> diff --git a/drivers/iio/adc/gehc-pmc-adc.c b/drivers/iio/adc/gehc-pmc-adc.c
> new file mode 100644
> index 000000000000..c70a93f4a61b
> --- /dev/null
> +++ b/drivers/iio/adc/gehc-pmc-adc.c
> @@ -0,0 +1,227 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * The GE HealthCare PMC ADC is a 16-Channel (Voltage and current), 16-Bit
> + * ADC with an I2C Interface.
> + *
> + * Copyright (C) 2024, GE HealthCare
> + *
> + * Authors:
> + * Herve Codina <herve.codina@bootlin.com>
> + */
> +#include <dt-bindings/iio/adc/gehc,pmc-adc.h>
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +
> +struct pmc_adc {
> + struct i2c_client *client;
> +};
> +
> +#define PMC_ADC_CMD_REQUEST_PROTOCOL_VERSION 0x01
> +#define PMC_ADC_CMD_READ_VOLTAGE(_ch) (0x10 | (_ch))
> +#define PMC_ADC_CMD_READ_CURRENT(_ch) (0x20 | (_ch))
> +
> +#define PMC_ADC_VOLTAGE_CHANNEL(_ch, _ds_name) { \
> + .type = IIO_VOLTAGE, \
> + .indexed = 1, \
> + .channel = (_ch), \
> + .address = PMC_ADC_CMD_READ_VOLTAGE(_ch), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
> + .datasheet_name = (_ds_name), \
> +}
> +
> +#define PMC_ADC_CURRENT_CHANNEL(_ch, _ds_name) { \
> + .type = IIO_CURRENT, \
> + .indexed = 1, \
> + .channel = (_ch), \
> + .address = PMC_ADC_CMD_READ_CURRENT(_ch), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
> + .datasheet_name = (_ds_name), \
> +}
> +
> +static const struct iio_chan_spec pmc_adc_channels[] = {
> + PMC_ADC_VOLTAGE_CHANNEL(0, "CH0_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(1, "CH1_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(2, "CH2_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(3, "CH3_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(4, "CH4_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(5, "CH5_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(6, "CH6_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(7, "CH7_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(8, "CH8_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(9, "CH9_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(10, "CH10_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(11, "CH11_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(12, "CH12_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(13, "CH13_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(14, "CH14_V"),
> + PMC_ADC_VOLTAGE_CHANNEL(15, "CH15_V"),
> +
> + PMC_ADC_CURRENT_CHANNEL(0, "CH0_I"),
> + PMC_ADC_CURRENT_CHANNEL(1, "CH1_I"),
> + PMC_ADC_CURRENT_CHANNEL(2, "CH2_I"),
> + PMC_ADC_CURRENT_CHANNEL(3, "CH3_I"),
> + PMC_ADC_CURRENT_CHANNEL(4, "CH4_I"),
> + PMC_ADC_CURRENT_CHANNEL(5, "CH5_I"),
> + PMC_ADC_CURRENT_CHANNEL(6, "CH6_I"),
> + PMC_ADC_CURRENT_CHANNEL(7, "CH7_I"),
> + PMC_ADC_CURRENT_CHANNEL(8, "CH8_I"),
> + PMC_ADC_CURRENT_CHANNEL(9, "CH9_I"),
> + PMC_ADC_CURRENT_CHANNEL(10, "CH10_I"),
> + PMC_ADC_CURRENT_CHANNEL(11, "CH11_I"),
> + PMC_ADC_CURRENT_CHANNEL(12, "CH12_I"),
> + PMC_ADC_CURRENT_CHANNEL(13, "CH13_I"),
> + PMC_ADC_CURRENT_CHANNEL(14, "CH14_I"),
> + PMC_ADC_CURRENT_CHANNEL(15, "CH15_I"),
> +};
> +
> +static int pmc_adc_read_raw_ch(struct pmc_adc *pmc_adc, u8 cmd, int *val)
> +{
> + s32 ret;
> +
> + ret = i2c_smbus_read_word_swapped(pmc_adc->client, cmd);
> + if (ret < 0) {
> + dev_err(&pmc_adc->client->dev, "i2c read word failed (%d)\n", ret);
> + return ret;
> + }
> +
> + *val = sign_extend32(ret, 15);
> + return 0;
> +}
> +
> +static int pmc_adc_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct pmc_adc *pmc_adc = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_PROCESSED:
> + /* Values are directly read in mV or mA */
> + ret = pmc_adc_read_raw_ch(pmc_adc, chan->address, val);
> + if (ret)
> + return ret;
> + return IIO_VAL_INT;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int pmc_adc_fwnode_xlate(struct iio_dev *indio_dev,
> + const struct fwnode_reference_args *iiospec)
> +{
> + enum iio_chan_type expected_type;
> + unsigned int i;
> +
> + /*
> + * args[0]: Acquisition type (i.e. voltage or current)
> + * args[1]: PMC ADC channel number
> + */
> + if (iiospec->nargs != 2)
> + return -EINVAL;
> +
> + switch (iiospec->args[0]) {
> + case GEHC_PMC_ADC_VOLTAGE:
> + expected_type = IIO_VOLTAGE;
> + break;
> + case GEHC_PMC_ADC_CURRENT:
> + expected_type = IIO_CURRENT;
> + break;
> + default:
> + dev_err(&indio_dev->dev, "Invalid channel type %llu\n",
> + iiospec->args[0]);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < indio_dev->num_channels; i++)
> + if (indio_dev->channels[i].type == expected_type &&
> + indio_dev->channels[i].channel == iiospec->args[1])
> + return i;
> +
> + dev_err(&indio_dev->dev, "Invalid channel type %llu number %llu\n",
> + iiospec->args[0], iiospec->args[1]);
> + return -EINVAL;
> +}
> +
> +static const struct iio_info pmc_adc_info = {
> + .read_raw = pmc_adc_read_raw,
> + .fwnode_xlate = pmc_adc_fwnode_xlate,
> +};
> +
> +static const char *const pmc_adc_regulator_names[] = {
> + "vdd",
> + "vdda",
> + "vddio",
> + "vref",
> +};
> +
> +static int pmc_adc_probe(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev;
> + struct pmc_adc *pmc_adc;
> + struct clk *clk;
> + s32 val;
> + int ret;
> +
> + ret = devm_regulator_bulk_get_enable(&client->dev, ARRAY_SIZE(pmc_adc_regulator_names),
> + pmc_adc_regulator_names);
> + if (ret)
> + return dev_err_probe(&client->dev, ret, "Failed to get regulators\n");
> +
> + clk = devm_clk_get_optional_enabled(&client->dev, "osc");
> + if (IS_ERR(clk))
> + return dev_err_probe(&client->dev, PTR_ERR(clk), "Failed to get osc clock\n");
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*pmc_adc));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + pmc_adc = iio_priv(indio_dev);
> + pmc_adc->client = client;
> +
> + val = i2c_smbus_read_byte_data(pmc_adc->client, PMC_ADC_CMD_REQUEST_PROTOCOL_VERSION);
> + if (val < 0)
> + return dev_err_probe(&client->dev, val, "Failed to get protocol version\n");
> +
> + if (val != 0x01)
> + return dev_err_probe(&client->dev, -EINVAL,
> + "Unsupported protocol version 0x%02x\n", val);
> +
> + indio_dev->name = "pmc_adc";
> + indio_dev->info = &pmc_adc_info;
> + indio_dev->channels = pmc_adc_channels;
> + indio_dev->num_channels = ARRAY_SIZE(pmc_adc_channels);
> +
> + return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
> +static const struct of_device_id pmc_adc_of_match[] = {
> + { .compatible = "gehc,pmc-adc"},
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, pmc_adc_of_match);
> +
> +static const struct i2c_device_id pmc_adc_id_table[] = {
> + { "pmc-adc" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, pmc_adc_id_table);
> +
> +static struct i2c_driver pmc_adc_i2c_driver = {
> + .driver = {
> + .name = "pmc-adc",
> + .of_match_table = pmc_adc_of_match,
> + },
> + .id_table = pmc_adc_id_table,
> + .probe = pmc_adc_probe,
> +};
> +
> +module_i2c_driver(pmc_adc_i2c_driver);
> +
> +MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
> +MODULE_DESCRIPTION("GE HealthCare PMC ADC driver");
> +MODULE_LICENSE("GPL");
> --
> 2.46.1
>
>
© 2016 - 2024 Red Hat, Inc.