From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
This patch expands the status information provided by ethtool for PSE c33
with current port priority and max port priority. It also adds a call to
pse_ethtool_set_prio() to configure the PSE port priority.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Documentation/networking/ethtool-netlink.rst | 16 ++++++++++++++++
include/uapi/linux/ethtool_netlink.h | 2 ++
net/ethtool/pse-pd.c | 18 ++++++++++++++++++
3 files changed, 36 insertions(+)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 295563e91082..15208429a973 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1763,6 +1763,10 @@ Kernel response contents:
limit of the PoE PSE.
``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested Supported power limit
configuration ranges.
+ ``ETHTOOL_A_C33_PSE_PRIO_MAX`` u32 priority maximum configurable
+ on the PoE PSE
+ ``ETHTOOL_A_C33_PSE_PRIO`` u32 priority of the PoE PSE
+ currently configured
========================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
@@ -1836,6 +1840,12 @@ identifies the C33 PSE power limit ranges through
If the controller works with fixed classes, the min and max values will be
equal.
+When set, the optional ``ETHTOOL_A_C33_PSE_PRIO_MAX`` attribute identifies
+the C33 PSE maximum priority value.
+
+When set, the optional ``ETHTOOL_A_C33_PSE_PRIO`` attributes is used to
+identifies the currently configured C33 PSE priority.
+
PSE_SET
=======
@@ -1849,6 +1859,8 @@ Request contents:
``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` u32 Control PSE Admin state
``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` u32 Control PoE PSE available
power limit
+ ``ETHTOOL_A_C33_PSE_PRIO`` u32 Control priority of the
+ PoE PSE
====================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
@@ -1871,6 +1883,10 @@ various existing products that document power consumption in watts rather than
classes. If power limit configuration based on classes is needed, the
conversion can be done in user space, for example by ethtool.
+When set, the optional ``ETHTOOL_A_C33_PSE_PRIO`` attributes is used to
+control the C33 PSE priority. Allowed priority value are between zero
+and the value of ``ETHTOOL_A_C33_PSE_PRIO_MAX`` attribute.
+
RSS_GET
=======
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 283305f6b063..874a4bca2e19 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -970,6 +970,8 @@ enum {
ETHTOOL_A_C33_PSE_EXT_SUBSTATE, /* u32 */
ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT, /* u32 */
ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES, /* nest - _C33_PSE_PW_LIMIT_* */
+ ETHTOOL_A_C33_PSE_PRIO_MAX, /* u32 */
+ ETHTOOL_A_C33_PSE_PRIO, /* u32 */
/* add new constants above here */
__ETHTOOL_A_PSE_CNT,
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index a0705edca22a..439739eaf2ed 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -109,6 +109,9 @@ static int pse_reply_size(const struct ethnl_req_info *req_base,
len += st->c33_pw_limit_nb_ranges *
(nla_total_size(0) +
nla_total_size(sizeof(u32)) * 2);
+ if (st->c33_prio_max)
+ /* _C33_PSE_PRIO_MAX + _C33_PSE_PRIO */
+ len += nla_total_size(sizeof(u32)) * 2;
return len;
}
@@ -198,6 +201,11 @@ static int pse_fill_reply(struct sk_buff *skb,
pse_put_pw_limit_ranges(skb, st))
return -EMSGSIZE;
+ if (st->c33_prio_max > 0 &&
+ (nla_put_u32(skb, ETHTOOL_A_C33_PSE_PRIO_MAX, st->c33_prio_max) ||
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_PRIO, st->c33_prio)))
+ return -EMSGSIZE;
+
return 0;
}
@@ -219,6 +227,7 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
NLA_POLICY_RANGE(NLA_U32, ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED,
ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED),
[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT] = { .type = NLA_U32 },
+ [ETHTOOL_A_C33_PSE_PRIO] = { .type = NLA_U32 },
};
static int
@@ -267,6 +276,15 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
if (ret)
return ret;
+ if (tb[ETHTOOL_A_C33_PSE_PRIO]) {
+ unsigned int prio;
+
+ prio = nla_get_u32(tb[ETHTOOL_A_C33_PSE_PRIO]);
+ ret = pse_ethtool_set_prio(phydev->psec, info->extack, prio);
+ if (ret)
+ return ret;
+ }
+
if (tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]) {
unsigned int pw_limit;
--
2.34.1