[PATCH v2 1/4] ARM: dts: microchip: Rename the eeprom nodename

Andrei Simion posted 4 patches 1 month, 3 weeks ago
There is a newer version of this series
[PATCH v2 1/4] ARM: dts: microchip: Rename the eeprom nodename
Posted by Andrei Simion 1 month, 3 weeks ago
Align the eeprom nodename according to devicetree specification and
at24.yaml

Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
---
v1 -> v2:
- adjust commit message length
---
 arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi   | 2 +-
 arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts   | 2 +-
 arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts | 2 +-
 arch/arm/boot/dts/microchip/at91sam9260ek.dts         | 2 +-
 arch/arm/boot/dts/microchip/at91sam9263ek.dts         | 2 +-
 arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi | 2 +-
 arch/arm/boot/dts/microchip/sama5d34ek.dts            | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
index 95ecb7d040a8..8ac85dac5a96 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
@@ -106,7 +106,7 @@ i2c0: i2c@f8028000 {
 				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@50 {
+				eeprom@50 {
 					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <8>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
index 200b20515ab1..e4ae60ef5f8a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -231,7 +231,7 @@ i2c1: i2c@fc028000 {
 				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@50 {
+				eeprom@50 {
 					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <8>;
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
index 6680031387e8..4bab3f25b855 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -411,7 +411,7 @@ i2c1: i2c@fc028000 {
 				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@54 {
+				eeprom@54 {
 					compatible = "atmel,24c02";
 					reg = <0x54>;
 					pagesize = <16>;
diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
index 720c15472c4a..6bd60dce8378 100644
--- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
@@ -165,7 +165,7 @@ button-4 {
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 		};
diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index ce8baff6a9f4..bad7dbecba3c 100644
--- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -253,7 +253,7 @@ button-right-click {
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 			pagesize = <128>;
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
index 565b99e79c52..4e7cfbbd4241 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
@@ -220,7 +220,7 @@ usb0: ohci@500000 {
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 			vcc-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/microchip/sama5d34ek.dts b/arch/arm/boot/dts/microchip/sama5d34ek.dts
index bffd61397cb5..18943b873fff 100644
--- a/arch/arm/boot/dts/microchip/sama5d34ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d34ek.dts
@@ -36,7 +36,7 @@ i2c0: i2c@f0014000 {
 			i2c1: i2c@f0018000 {
 				status = "okay";
 
-				24c256@50 {
+				eeprom@50 {
 					compatible = "atmel,24c256";
 					reg = <0x50>;
 					pagesize = <64>;
-- 
2.34.1