Notice the VMD remapped PCIe Root Port and NVMe have PCI PM L1 substates
capability, but they are disabled originally.

Here is a failed example on ASUS B1400CEAE with enabled VMD:

10000:e0:06.0 PCI bridge [0604]: Intel Corporation 11th Gen Core Processor PCIe Controller [8086:9a09] (rev 01) (prog-if 00 [Normal decode])
    ...
    Capabilities: [200 v1] L1 PM Substates
        L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
                  PortCommonModeRestoreTime=45us PortTPowerOnTime=50us
        L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
                   T_CommonMode=0us LTR1.2_Threshold=0ns
        L1SubCtl2: T_PwrOn=0us

10000:e1:00.0 Non-Volatile memory controller [0108]: Sandisk Corp WD Blue SN550 NVMe SSD [15b7:5009] (rev 01) (prog-if 02 [NVM Express])
    ...
    Capabilities: [900 v1] L1 PM Substates
        L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+
                  PortCommonModeRestoreTime=32us PortTPowerOnTime=10us
        L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
                   T_CommonMode=0us LTR1.2_Threshold=101376ns
        L1SubCtl2: T_PwrOn=50us

According to "PCIe r6.0, sec 5.5.4", to config the link between the PCIe
Root Port and the child device correctly:
* Ensure both devices are in D0 before enabling PCI-PM L1 PM Substates.
* Ensure L1.2 parameters: Common_Mode_Restore_Times, T_POWER_ON and
  LTR_L1.2_THRESHOLD are programmed properly on both devices before enable
  bits for L1.2.

Prepare this series to fix that.

Jian-Hong Pan (3):
  PCI: vmd: Set PCI devices to D0 before enable PCI PM's L1 substates
  PCI/ASPM: Add notes about enabling PCI-PM L1SS to
    pci_enable_link_state(_locked)
  PCI/ASPM: Make pci_save_aspm_l1ss_state save both child and parent's
    L1SS configuration

 drivers/pci/controller/vmd.c | 13 +++++++++----
 drivers/pci/pcie/aspm.c      | 26 +++++++++++++++++++++++++-
 2 files changed, 34 insertions(+), 5 deletions(-)

-- 
2.46.2