From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>

Remove IO expanders on I2C bus 13 according to schematic change.

Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 28 -------------------
 1 file changed, 28 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index b6566e2ca274..ae2a2ed603ff 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -731,34 +731,6 @@ ipmb@10 {
 		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
 		i2c-protocol;
 	};
-
-	gpio@20 {
-		compatible = "nxp,pca9506";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpio@21 {
-		compatible = "nxp,pca9506";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpio@22 {
-		compatible = "nxp,pca9506";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpio@23 {
-		compatible = "nxp,pca9506";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &i2c14 {
-- 
2.25.1

On Tue, 01 Oct 2024 16:30:21 +0800, Delphine CC Chiu wrote:
> Remove IO expanders on I2C bus 13 according to schematic change.
> 
> 

Thanks, I've applied this to be picked up through the BMC tree.

--
Andrew Jeffery <andrew@codeconstruct.com.au>