From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>

Change the address of the I2C mux for two fan boards to 0x74
according to schematic.

Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 76 ++++++++++---------
 1 file changed, 39 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 3ff22ec8de02..ecf012c9cbbc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -32,6 +32,8 @@ aliases {
 		i2c27 = &imux27;
 		i2c28 = &imux28;
 		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
 		i2c34 = &imux34;
 		i2c35 = &imux35;
 	};
@@ -1062,6 +1064,8 @@ gpio@23 {
 };
 
 &i2c14 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-frequency = <400000>;
 	adc@1d {
@@ -1122,20 +1126,50 @@ eeprom@51 {
 		reg = <0x51>;
 	};
 
-	i2c-mux@71 {
-		compatible = "nxp,pca9846";
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		idle-state = <0>;
 		i2c-mux-idle-disconnect;
-		reg = <0x71>;
+		reg = <0x73>;
 
 		i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
 
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux30: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			adc@1f {
 				compatible = "ti,adc128d818";
 				reg = <0x1f>;
@@ -1183,10 +1217,10 @@ gpio@61 {
 			};
 		};
 
-		i2c@1 {
+		imux31: i2c@1 {
+			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0>;
 
 			adc@1f {
 				compatible = "ti,adc128d818";
@@ -1235,38 +1269,6 @@ gpio@61 {
 			};
 		};
 	};
-
-	i2c-mux@73 {
-		compatible = "nxp,pca9544";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		idle-state = <0>;
-		i2c-mux-idle-disconnect;
-		reg = <0x73>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adc@35 {
-				compatible = "maxim,max11617";
-				reg = <0x35>;
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adc@35 {
-				compatible = "maxim,max11617";
-				reg = <0x35>;
-			};
-		};
-	};
 };
 
 &i2c15 {
-- 
2.25.1