1. Patchew
  2. linux
  3. [PATCH v5 00/10]drm/bridge: it6505: fix HDCP CTS fail items and add MCCS support
  4. View patch

[PATCH v5 03/10] drm/bridge: it6505: add AUX operation for HDCP KSV list read

Hermes Wu posted 10 patches 1 month, 4 weeks ago
Only 4 patches received!
There is a newer version of this series
[PATCH v5 03/10] drm/bridge: it6505: add AUX operation for HDCP KSV list read
Posted by Hermes Wu 1 month, 4 weeks ago 
From: Hermes Wu <Hermes.wu@ite.com.tw>

HDCP KSV list readback can choose to use AUX FIFO or general data register.
For some DisplayPort devices, the KSV list must be read in 5 byte boundaries.
The original AUX read command does not support these devices.

The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0] as AUX operacion control, and b[7:4] are status bits and read only.
To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using the data registers to using AUX FIFO.
The extended command "CMD_AUX_GET_KSV_LIST" is added as "CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode.

Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw>
---
 drivers/gpu/drm/bridge/ite-it6505.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 864fab7e388f..9a022c095af4 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -126,6 +126,7 @@
 #define REG_AUX_OUT_DATA0 0x27
 
 #define REG_AUX_CMD_REQ 0x2B
+#define M_AUX_REQ_CMD 0x0F
 #define AUX_BUSY BIT(5)
 
 #define REG_AUX_DATA_0_7 0x2C
@@ -324,6 +325,9 @@ enum aux_cmd_type {
 	CMD_AUX_NATIVE_READ = 0x0,
 	CMD_AUX_NATIVE_WRITE = 0x5,
 	CMD_AUX_I2C_EDID_READ = 0xB,
+
+	/* KSV read with AUX FIFO extend from CMD_AUX_NATIVE_READ*/
+	CMD_AUX_GET_KSV_LIST = 0x10,
 };
 
 enum aux_cmd_reply {
@@ -965,7 +969,8 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 	it6505_set_bits(it6505, REG_AUX_CTRL, AUX_USER_MODE, AUX_USER_MODE);
 
 aux_op_start:
-	if (cmd == CMD_AUX_I2C_EDID_READ) {
+	/* HW AUX FIFO supports only EDID and DCPD KSV FIFO area */
+	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
 		/* AUX EDID FIFO has max length of AUX_FIFO_MAX_SIZE bytes. */
 		size = min_t(size_t, size, AUX_FIFO_MAX_SIZE);
 		/* Enable AUX FIFO read back and clear FIFO */
@@ -996,7 +1001,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 				  size);
 
 	/* Aux Fire */
-	it6505_write(it6505, REG_AUX_CMD_REQ, cmd);
+	it6505_write(it6505, REG_AUX_CMD_REQ, FIELD_GET(M_AUX_REQ_CMD, cmd));
 
 	ret = it6505_aux_wait(it6505);
 	if (ret < 0)
@@ -1030,7 +1035,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 		goto aux_op_start;
 	}
 
-	if (cmd == CMD_AUX_I2C_EDID_READ) {
+	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
 		for (i = 0; i < size; i++) {
 			ret = it6505_read(it6505, REG_AUX_DATA_FIFO);
 			if (ret < 0)
@@ -1055,7 +1060,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
 	ret = i;
 
 aux_op_err:
-	if (cmd == CMD_AUX_I2C_EDID_READ) {
+	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
 		/* clear AUX FIFO */
 		it6505_set_bits(it6505, REG_AUX_CTRL,
 				AUX_EN_FIFO_READ | CLR_EDID_FIFO,
@@ -1076,7 +1081,8 @@ static ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
 				      size_t size, enum aux_cmd_reply *reply)
 {
 	int i, ret_size, ret = 0, request_size;
-	int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ) ? AUX_FIFO_MAX_SIZE : 4;
+	int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) ?
+						 AUX_FIFO_MAX_SIZE : 4;
 
 	mutex_lock(&it6505->aux_lock);
 	i = 0;
-- 
2.34.1
Re: [PATCH v5 03/10] drm/bridge: it6505: add AUX operation for HDCP KSV list read
Posted by Dmitry Baryshkov 1 month, 2 weeks ago 
On Tue, Oct 01, 2024 at 02:43:02PM +0800, Hermes Wu wrote:
> From: Hermes Wu <Hermes.wu@ite.com.tw>
> 
> HDCP KSV list readback can choose to use AUX FIFO or general data register.
> For some DisplayPort devices, the KSV list must be read in 5 byte boundaries.
> The original AUX read command does not support these devices.
> 
> The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0] as AUX operacion control, and b[7:4] are status bits and read only.
> To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using the data registers to using AUX FIFO.
> The extended command "CMD_AUX_GET_KSV_LIST" is added as "CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode.

Please keep the commit message wrapped at 72-75 chars.

Other than that:


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


> 
> Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw>
> ---
>  drivers/gpu/drm/bridge/ite-it6505.c | 16 +++++++++++-----
>  1 file changed, 11 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
> index 864fab7e388f..9a022c095af4 100644
> --- a/drivers/gpu/drm/bridge/ite-it6505.c
> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
> @@ -126,6 +126,7 @@
>  #define REG_AUX_OUT_DATA0 0x27
>  
>  #define REG_AUX_CMD_REQ 0x2B
> +#define M_AUX_REQ_CMD 0x0F
>  #define AUX_BUSY BIT(5)
>  
>  #define REG_AUX_DATA_0_7 0x2C
> @@ -324,6 +325,9 @@ enum aux_cmd_type {
>  	CMD_AUX_NATIVE_READ = 0x0,
>  	CMD_AUX_NATIVE_WRITE = 0x5,
>  	CMD_AUX_I2C_EDID_READ = 0xB,
> +
> +	/* KSV read with AUX FIFO extend from CMD_AUX_NATIVE_READ*/
> +	CMD_AUX_GET_KSV_LIST = 0x10,
>  };
>  
>  enum aux_cmd_reply {
> @@ -965,7 +969,8 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
>  	it6505_set_bits(it6505, REG_AUX_CTRL, AUX_USER_MODE, AUX_USER_MODE);
>  
>  aux_op_start:
> -	if (cmd == CMD_AUX_I2C_EDID_READ) {
> +	/* HW AUX FIFO supports only EDID and DCPD KSV FIFO area */
> +	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
>  		/* AUX EDID FIFO has max length of AUX_FIFO_MAX_SIZE bytes. */
>  		size = min_t(size_t, size, AUX_FIFO_MAX_SIZE);
>  		/* Enable AUX FIFO read back and clear FIFO */
> @@ -996,7 +1001,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
>  				  size);
>  
>  	/* Aux Fire */
> -	it6505_write(it6505, REG_AUX_CMD_REQ, cmd);
> +	it6505_write(it6505, REG_AUX_CMD_REQ, FIELD_GET(M_AUX_REQ_CMD, cmd));
>  
>  	ret = it6505_aux_wait(it6505);
>  	if (ret < 0)
> @@ -1030,7 +1035,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
>  		goto aux_op_start;
>  	}
>  
> -	if (cmd == CMD_AUX_I2C_EDID_READ) {
> +	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
>  		for (i = 0; i < size; i++) {
>  			ret = it6505_read(it6505, REG_AUX_DATA_FIFO);
>  			if (ret < 0)
> @@ -1055,7 +1060,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
>  	ret = i;
>  
>  aux_op_err:
> -	if (cmd == CMD_AUX_I2C_EDID_READ) {
> +	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
>  		/* clear AUX FIFO */
>  		it6505_set_bits(it6505, REG_AUX_CTRL,
>  				AUX_EN_FIFO_READ | CLR_EDID_FIFO,
> @@ -1076,7 +1081,8 @@ static ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
>  				      size_t size, enum aux_cmd_reply *reply)
>  {
>  	int i, ret_size, ret = 0, request_size;
> -	int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ) ? AUX_FIFO_MAX_SIZE : 4;
> +	int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) ?
> +						 AUX_FIFO_MAX_SIZE : 4;
>  
>  	mutex_lock(&it6505->aux_lock);
>  	i = 0;
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry
RE: [PATCH v5 03/10] drm/bridge: it6505: add AUX operation for HDCP KSV list read
Posted by Hermes.Wu@ite.com.tw 1 month, 2 weeks ago 
>-----Original Message-----
>From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> 
>Sent: Monday, October 14, 2024 7:53 PM
>To: Hermes Wu (吳佳宏) <Hermes.Wu@ite.com.tw>
>Cc: Pin-yen Lin <treapking@chromium.org>; Kenneth Hung (洪家倫) <Kenneth.Hung@ite.com.tw>; Pet Weng (翁玉芬) <Pet.Weng@ite.com.tw>; Andrzej Hajda <andrzej.hajda@intel.com>; Neil Armstrong <neil.armstrong@linaro.org>; Robert Foss <rfoss@kernel.org>; Laurent Pinchart <Laurent.pinchart@ideasonboard.com>; Jonas Karlman <jonas@kwiboo.se>; Jernej Skrabec <jernej.skrabec@gmail.com>; Maarten Lankhorst <maarten.lankhorst@linux.intel.com>; Maxime Ripard <mripard@kernel.org>; Thomas Zimmermann <tzimmermann@suse.de>; David Airlie <airlied@gmail.com>; Simona Vetter <simona@ffwll.ch>; open list:DRM DRIVERS <dri-devel@lists.freedesktop.org>; open list <linux-kernel@vger.kernel.org>
>Subject: Re: [PATCH v5 03/10] drm/bridge: it6505: add AUX operation for HDCP KSV list read
>
>On Tue, Oct 01, 2024 at 02:43:02PM +0800, Hermes Wu wrote:
>> From: Hermes Wu <Hermes.wu@ite.com.tw>
>> 
>> HDCP KSV list readback can choose to use AUX FIFO or general data register.
>> For some DisplayPort devices, the KSV list must be read in 5 byte boundaries.
>> The original AUX read command does not support these devices.
>> 
>> The AUX command operation control register "REG_AUX_CMD_REQ" uses b[3:0] as AUX operacion control, and b[7:4] are status bits and read only.
>> To change KSV read operation uses "CMD_AUX_NATIVE_READ" from using the data registers to using AUX FIFO.
>> The extended command "CMD_AUX_GET_KSV_LIST" is added as "CMD_AUX_NATIVE_READ" with the 0x10 flag which selects AUX FIFO mode.
>
>Please keep the commit message wrapped at 72-75 chars.
>
>Other than that:

Should I send new v6 patches with commit message wrapped at 72-75 chars?

Thanks.
>
>Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
>
>> 
>> Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw>
>> ---
>>  drivers/gpu/drm/bridge/ite-it6505.c | 16 +++++++++++-----
>>  1 file changed, 11 insertions(+), 5 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/bridge/ite-it6505.c 
>> b/drivers/gpu/drm/bridge/ite-it6505.c
>> index 864fab7e388f..9a022c095af4 100644
>> --- a/drivers/gpu/drm/bridge/ite-it6505.c
>> +++ b/drivers/gpu/drm/bridge/ite-it6505.c
>> @@ -126,6 +126,7 @@
>>  #define REG_AUX_OUT_DATA0 0x27
>>  
>>  #define REG_AUX_CMD_REQ 0x2B
>> +#define M_AUX_REQ_CMD 0x0F
>>  #define AUX_BUSY BIT(5)
>>  
>>  #define REG_AUX_DATA_0_7 0x2C
>> @@ -324,6 +325,9 @@ enum aux_cmd_type {
>>  	CMD_AUX_NATIVE_READ = 0x0,
>>  	CMD_AUX_NATIVE_WRITE = 0x5,
>>  	CMD_AUX_I2C_EDID_READ = 0xB,
>> +
>> +	/* KSV read with AUX FIFO extend from CMD_AUX_NATIVE_READ*/
>> +	CMD_AUX_GET_KSV_LIST = 0x10,
>>  };
>>  
>>  enum aux_cmd_reply {
>> @@ -965,7 +969,8 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
>>  	it6505_set_bits(it6505, REG_AUX_CTRL, AUX_USER_MODE, AUX_USER_MODE);
>>  
>>  aux_op_start:
>> -	if (cmd == CMD_AUX_I2C_EDID_READ) {
>> +	/* HW AUX FIFO supports only EDID and DCPD KSV FIFO area */
>> +	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
>>  		/* AUX EDID FIFO has max length of AUX_FIFO_MAX_SIZE bytes. */
>>  		size = min_t(size_t, size, AUX_FIFO_MAX_SIZE);
>>  		/* Enable AUX FIFO read back and clear FIFO */ @@ -996,7 +1001,7 @@ 
>> static ssize_t it6505_aux_operation(struct it6505 *it6505,
>>  				  size);
>>  
>>  	/* Aux Fire */
>> -	it6505_write(it6505, REG_AUX_CMD_REQ, cmd);
>> +	it6505_write(it6505, REG_AUX_CMD_REQ, FIELD_GET(M_AUX_REQ_CMD, 
>> +cmd));
>>  
>>  	ret = it6505_aux_wait(it6505);
>>  	if (ret < 0)
>> @@ -1030,7 +1035,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
>>  		goto aux_op_start;
>>  	}
>>  
>> -	if (cmd == CMD_AUX_I2C_EDID_READ) {
>> +	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
>>  		for (i = 0; i < size; i++) {
>>  			ret = it6505_read(it6505, REG_AUX_DATA_FIFO);
>>  			if (ret < 0)
>> @@ -1055,7 +1060,7 @@ static ssize_t it6505_aux_operation(struct it6505 *it6505,
>>  	ret = i;
>>  
>>  aux_op_err:
>> -	if (cmd == CMD_AUX_I2C_EDID_READ) {
>> +	if (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) {
>>  		/* clear AUX FIFO */
>>  		it6505_set_bits(it6505, REG_AUX_CTRL,
>>  				AUX_EN_FIFO_READ | CLR_EDID_FIFO, @@ -1076,7 +1081,8 @@ static 
>> ssize_t it6505_aux_do_transfer(struct it6505 *it6505,
>>  				      size_t size, enum aux_cmd_reply *reply)  {
>>  	int i, ret_size, ret = 0, request_size;
>> -	int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ) ? AUX_FIFO_MAX_SIZE : 4;
>> +	int fifo_max_size = (cmd == CMD_AUX_I2C_EDID_READ || cmd == CMD_AUX_GET_KSV_LIST) ?
>> +						 AUX_FIFO_MAX_SIZE : 4;
>>  
>>  	mutex_lock(&it6505->aux_lock);
>>  	i = 0;
>> --
>> 2.34.1
>> 
>
>-- 
>With best wishes
>Dmitry
>
>
BR,
Hermes

Patchew 2.1-devel-b67e4c2

© 2016 - 2024 Red Hat, Inc.