This patchset includes the following fixes:

- Enable the target functionality in the interrupt handling routine 
  when the i2c transfer is about to finish.
- Correct the read/write operation procedure.
- Introduce a software flag to handle the bus error (BER) condition
  which is not caused by the i2c transfer.
- Modify timeout calculation.
- Assign the client address earlier logically.
- Use an i2c frequency table for the frequency parameters assignment.
- Coding style fix.

The NPCM I2C driver is tested on NPCM750 and NPCM845 evaluation boards.

Addressed comments from:
- Andi Shyti : https://lore.kernel.org/lkml/5mxsciw6443k5rlpymrs7addvme
  53f5v3zuj5u7tvlggfeirik@dy2bvyz2lyue/
- Andi Shyti : https://lore.kernel.org/lkml/z4g5alkk3cug7v5bsmrmzspgvo4
  hhu2ebtykht72ewwhsqxqgq@kg2tlpvz3ctp/
- Andy Shevchenko : https://lore.kernel.org/lkml/Zu2HmkagbpMf_CNE@smile
  .fi.intel.com/

Changes since version 4:
- Add more description for the codes.
- Modify the term "function" to "function()" in the commit message
and code comments.

Changes since version 3:
- Remove "Bug fixes" in the cover letter title.
- Modify the term "function" to "func()" in the commit message and
  code comments.
- Correct the coding style.

Changes since version 2:
- Add more explanations in the commit message and code modification.
- Use lower character names for declarations.
- Remove Fixes tags in commits which are not to fix bugs.

Changes since version 1:
- Restore the npcm_i2caddr array length to fix the smatch warning.
- Remove unused variables.
- Handle the condition where scl_table_cnt reaches to the maximum value.
- Fix the checkpatch warning.

Charles Boyer (1):
  i2c: npcm: Enable slave in eob interrupt

Tyrone Ting (5):
  i2c: npcm: correct the read/write operation procedure
  i2c: npcm: use a software flag to indicate a BER condition
  i2c: npcm: Modify timeout evaluation mechanism
  i2c: npcm: Modify the client address assignment
  i2c: npcm: use i2c frequency table

 drivers/i2c/busses/i2c-npcm7xx.c | 440 ++++++++++++++++++++++++-------
 1 file changed, 338 insertions(+), 102 deletions(-)


base-commit: f56f4ba2fc1dbefd3242946f2fad35338a60e3bc
-- 
2.34.1

Hi Tyrone,

> Tyrone Ting (5):
>   i2c: npcm: correct the read/write operation procedure
>   i2c: npcm: use a software flag to indicate a BER condition

I merged just these two patches to i2c/i2c-host.

Thanks,
Andi

>   i2c: npcm: Modify timeout evaluation mechanism
>   i2c: npcm: Modify the client address assignment
>   i2c: npcm: use i2c frequency table

Hi Andi:

Thank you for your support.

Andi Shyti <andi.shyti@kernel.org> 於 2024年10月2日 週三 下午4:34寫道：
>
> Hi Tyrone,
>
> > Tyrone Ting (5):
> >   i2c: npcm: correct the read/write operation procedure
> >   i2c: npcm: use a software flag to indicate a BER condition
>
> I merged just these two patches to i2c/i2c-host.
>
> Thanks,
> Andi
>
> >   i2c: npcm: Modify timeout evaluation mechanism
> >   i2c: npcm: Modify the client address assignment
> >   i2c: npcm: use i2c frequency table

Have a nice day.

Regards,
Tyrone