Convert the vctrl-regulator bindings to DT schema.
This resolves a dtbs check warning for the rk3399-gru devices.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 .../bindings/regulator/vctrl-regulator.yaml   | 80 +++++++++++++++++++
 .../devicetree/bindings/regulator/vctrl.txt   | 49 ------------
 2 files changed, 80 insertions(+), 49 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/vctrl-regulator.yaml
 delete mode 100644 Documentation/devicetree/bindings/regulator/vctrl.txt

diff --git a/Documentation/devicetree/bindings/regulator/vctrl-regulator.yaml b/Documentation/devicetree/bindings/regulator/vctrl-regulator.yaml
new file mode 100644
index 000000000000..2311f79990a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/vctrl-regulator.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/vctrl-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltage controlled regulators
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: vctrl-regulator
+
+  ctrl-supply:
+    description: Regulator supplying the control voltage
+
+  ctrl-voltage-range:
+    description:
+      Array of two integer values describing the range (min/max) of the
+      control voltage. The values specify the control voltage needed to
+      generate the corresponding regulator-min/max-microvolt output
+      voltage.
+    minItems: 2
+    maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  min-slew-down-rate:
+    description:
+      Describes how slowly the regulator voltage will decay down in the
+      worst case (lightest expected load). Specified in uV / us (like
+      main regulator ramp rate). This value is required when
+      ovp-threshold-percent is specified.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ovp-threshold-percent:
+    description:
+      Overvoltage protection (OVP) threshold of the regulator in percent.
+      Some regulators have an OVP circuitry which shuts down the regulator
+      when the actual output voltage deviates beyond a certain margin from
+      the expected value for a given control voltage. On larger voltage
+      decreases this can occur undesiredly since the output voltage does
+      not adjust immediately to changes in the control voltage. To avoid
+      this situation the vctrl driver breaks down larger voltage decreases
+      into multiple steps, where each step is within the OVP threshold.
+    minimum: 0
+    maximum: 100
+
+unevaluatedProperties: false
+
+dependencies:
+  ovp-threshold-percent: [ min-slew-down-rate ]
+
+required:
+  - compatible
+  - ctrl-supply
+  - ctrl-voltage-range
+  - regulator-min-microvolt
+  - regulator-max-microvolt
+
+examples:
+  - |
+    vctrl-reg {
+            compatible = "vctrl-regulator";
+            regulator-name = "vctrl_reg";
+
+            ctrl-supply = <&ctrl_reg>;
+            ctrl-voltage-range = <200000 500000>;
+
+            min-slew-down-rate = <225>;
+            ovp-threshold-percent = <16>;
+
+            regulator-min-microvolt = <800000>;
+            regulator-max-microvolt = <1500000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/vctrl.txt b/Documentation/devicetree/bindings/regulator/vctrl.txt
deleted file mode 100644
index e940377cfd69..000000000000
--- a/Documentation/devicetree/bindings/regulator/vctrl.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Bindings for Voltage controlled regulators
-==========================================
-
-Required properties:
---------------------
-- compatible		  : must be "vctrl-regulator".
-- regulator-min-microvolt : smallest voltage consumers may set
-- regulator-max-microvolt : largest voltage consumers may set
-- ctrl-supply		  : The regulator supplying the control voltage.
-- ctrl-voltage-range	  : an array of two integer values describing the range
-			    (min/max) of the control voltage. The values specify
-			    the control voltage needed to generate the corresponding
-			    regulator-min/max-microvolt output voltage.
-
-Optional properties:
---------------------
-- ovp-threshold-percent	: overvoltage protection (OVP) threshold of the
-			  regulator in percent. Some regulators have an OVP
-			  circuitry which shuts down the regulator when the
-			  actual output voltage deviates beyond a certain
-			  margin from the expected value for a given control
-			  voltage. On larger voltage decreases this can occur
-			  undesiredly since the output voltage does not adjust
-			  immediately to changes in the control voltage. To
-			  avoid this situation the vctrl driver breaks down
-			  larger voltage decreases into multiple steps, where
-			  each step is within the OVP threshold.
-- min-slew-down-rate	: Describes how slowly the regulator voltage will decay
-			  down in the worst case (lightest expected load).
-			  Specified in uV / us (like main regulator ramp rate).
-			  This value is required when ovp-threshold-percent is
-			  specified.
-
-Example:
-
-	vctrl-reg {
-		compatible = "vctrl-regulator";
-		regulator-name = "vctrl_reg";
-
-		ctrl-supply = <&ctrl_reg>;
-
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1500000>;
-
-		ctrl-voltage-range = <200000 500000>;
-
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
-	};
-- 
2.43.0

On Mon, 30 Sep 2024 23:04:24 +0200, Heiko Stuebner wrote:
> Convert the vctrl-regulator bindings to DT schema.
> This resolves a dtbs check warning for the rk3399-gru devices.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] dt-bindings: regulator: vctrl-regulator: convert to YAML
      commit: 4e9a2c91bff44336157eefd8d80b8ceb27918737

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

On Mon, Sep 30, 2024 at 11:04:24PM +0200, Heiko Stuebner wrote:
> Convert the vctrl-regulator bindings to DT schema.
> This resolves a dtbs check warning for the rk3399-gru devices.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>