get_div() may return zero, so it is necessary to check
before calling DIV_ROUND_UP_ULL().

Return value of get_div() depends on reg1, reg2, shift1, shift2
fields of clk_double_div structure which are filled using the
PERIPH_DOUBLEDIV macro. This macro is called from the
PERIPH_CLK_FULL_DD and PERIPH_CLK_MUX_DD macros (the last 4 arguments).

It is not known exactly what values can be contained in the registers
at the addresses DIV_SEL0, DIV_SEL1, DIV_SEL2, so the final value of
div can be zero. Print an error message and return 0 in this case.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
---
v4: replace hw->init->name with clk_hw_get_name(hw)
v3: fix indentation
v2: added explanations to the commit message and printing 
of an error message when div==0
 drivers/clk/mvebu/armada-37xx-periph.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c
index 13906e31bef8..2f0145a76f22 100644
--- a/drivers/clk/mvebu/armada-37xx-periph.c
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
@@ -343,7 +343,12 @@ static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
 	div = get_div(double_div->reg1, double_div->shift1);
 	div *= get_div(double_div->reg2, double_div->shift2);
 
-	return DIV_ROUND_UP_ULL((u64)parent_rate, div);
+	if (!div) {
+		pr_err("Can't recalculate the rate of clock %s\n", clk_hw_get_name(hw));
+		return 0;
+	} else {
+		return DIV_ROUND_UP_ULL((u64)parent_rate, div);
+	}
 }
 
 static const struct clk_ops clk_double_div_ops = {
-- 
2.30.2

just a friendly reminder


30/09/24 13:49, Alexandra Diupina пишет:
> get_div() may return zero, so it is necessary to check
> before calling DIV_ROUND_UP_ULL().
>
> Return value of get_div() depends on reg1, reg2, shift1, shift2
> fields of clk_double_div structure which are filled using the
> PERIPH_DOUBLEDIV macro. This macro is called from the
> PERIPH_CLK_FULL_DD and PERIPH_CLK_MUX_DD macros (the last 4 arguments).
>
> It is not known exactly what values can be contained in the registers
> at the addresses DIV_SEL0, DIV_SEL1, DIV_SEL2, so the final value of
> div can be zero. Print an error message and return 0 in this case.
>
> Found by Linux Verification Center (linuxtesting.org) with SVACE.
>
> Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700")
> Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
> ---
> v4: replace hw->init->name with clk_hw_get_name(hw)
> v3: fix indentation
> v2: added explanations to the commit message and printing
> of an error message when div==0
>   drivers/clk/mvebu/armada-37xx-periph.c | 7 ++++++-
>   1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c
> index 13906e31bef8..2f0145a76f22 100644
> --- a/drivers/clk/mvebu/armada-37xx-periph.c
> +++ b/drivers/clk/mvebu/armada-37xx-periph.c
> @@ -343,7 +343,12 @@ static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
>   	div = get_div(double_div->reg1, double_div->shift1);
>   	div *= get_div(double_div->reg2, double_div->shift2);
>   
> -	return DIV_ROUND_UP_ULL((u64)parent_rate, div);
> +	if (!div) {
> +		pr_err("Can't recalculate the rate of clock %s\n", clk_hw_get_name(hw));
> +		return 0;
> +	} else {
> +		return DIV_ROUND_UP_ULL((u64)parent_rate, div);
> +	}
>   }
>   
>   static const struct clk_ops clk_double_div_ops = {