From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This correctly models the WLAN and Bluetooth modules on two boards using
the sc8280xp SoC. For the sc8280xp-crd we add the PMU, wifi and bluetooth
nodes with the correctly modelled wiring between them. For the X13s, we
rework existing nodes so that they align with the new DT bindings
contract.

v3 -> v4:
- bind bluetooth pins on X13s in patch 3/3
- only drop the regulator-always-on properties for vreg_s11b and vreg_s12b
  and fold this change into patch 3/3

v2 -> v3:
- move adding the bt-enable-gpios to the PMU on the CRD to patch 2/4
- add a patch removing the regulator-always-on property from regulators
  on X13s that no longer need it

v1 -> v2:
- fix commit message in patch 1/3
- drop drive-strength from the wlan enable pin function
- drop the calibration variant property from the wifi node of the CRD

Bartosz Golaszewski (2):
  arm64: dts: qcom: sc8280xp-crd: enable bluetooth
  arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855

Konrad Dybcio (1):
  arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855

 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts     | 168 ++++++++++++++++++
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 100 +++++++++--
 2 files changed, 254 insertions(+), 14 deletions(-)

-- 
2.30.2