drivers/iio/adc/ad7091r-base.h | 2 +- drivers/iio/adc/ad7606.h | 2 +- drivers/iio/adc/ad7887.c | 2 +- drivers/iio/adc/ad_sigma_delta.c | 4 ++-- drivers/iio/adc/max34408.c | 2 +- drivers/iio/adc/pac1921.c | 2 +- drivers/iio/adc/palmas_gpadc.c | 2 +- drivers/iio/adc/ti-ads1298.c | 2 +- drivers/iio/adc/ti_am335x_adc.c | 2 +- drivers/iio/adc/twl4030-madc.c | 2 +- drivers/iio/adc/xilinx-xadc-events.c | 2 +- 11 files changed, 12 insertions(+), 12 deletions(-)
This commit fixes several typographical errors in comments within
the drivers/iio/adc directory. No functional changes are made.
Detected using codespell.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
---
drivers/iio/adc/ad7091r-base.h | 2 +-
drivers/iio/adc/ad7606.h | 2 +-
drivers/iio/adc/ad7887.c | 2 +-
drivers/iio/adc/ad_sigma_delta.c | 4 ++--
drivers/iio/adc/max34408.c | 2 +-
drivers/iio/adc/pac1921.c | 2 +-
drivers/iio/adc/palmas_gpadc.c | 2 +-
drivers/iio/adc/ti-ads1298.c | 2 +-
drivers/iio/adc/ti_am335x_adc.c | 2 +-
drivers/iio/adc/twl4030-madc.c | 2 +-
drivers/iio/adc/xilinx-xadc-events.c | 2 +-
11 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
index 696bf7a897bb..092ddea0f395 100644
--- a/drivers/iio/adc/ad7091r-base.h
+++ b/drivers/iio/adc/ad7091r-base.h
@@ -65,7 +65,7 @@ struct ad7091r_state {
struct regulator *vref;
const struct ad7091r_chip_info *chip_info;
enum ad7091r_mode mode;
- struct mutex lock; /*lock to prevent concurent reads */
+ struct mutex lock; /*lock to prevent concurrent reads */
__be16 tx_buf __aligned(IIO_DMA_MINALIGN);
__be16 rx_buf;
};
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index 6649e84d25de..02195bedb574 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -46,7 +46,7 @@
* oversampling ratios.
* @oversampling_num number of elements stored in oversampling_avail array
* @os_req_reset some devices require a reset to update oversampling
- * @init_delay_ms required delay in miliseconds for initialization
+ * @init_delay_ms required delay in milliseconds for initialization
* after a restart
*/
struct ad7606_chip_info {
diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c
index b301da9b88b1..69add1dc4b53 100644
--- a/drivers/iio/adc/ad7887.c
+++ b/drivers/iio/adc/ad7887.c
@@ -41,7 +41,7 @@ enum ad7887_channels {
};
/**
- * struct ad7887_chip_info - chip specifc information
+ * struct ad7887_chip_info - chip specific information
* @int_vref_mv: the internal reference voltage
* @channels: channels specification
* @num_channels: number of channels
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index e2bed2d648f2..e30c7f8fcbec 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -469,7 +469,7 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
/*
* Data array after transfer will look like (if status is appended):
* data[] = { [0][sample][sample][sample][status] }
- * Keeping the first byte 0 shifts the status postion by 1 byte to the right.
+ * Keeping the first byte 0 shifts the status position by 1 byte to the right.
*/
status_pos = reg_size + 1;
@@ -656,7 +656,7 @@ int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev,
sigma_delta->spi = spi;
sigma_delta->info = info;
- /* If the field is unset in ad_sigma_delta_info, asume there can only be 1 slot. */
+ /* If the field is unset in ad_sigma_delta_info, assume there can only be 1 slot. */
if (!info->num_slots)
sigma_delta->num_slots = 1;
else
diff --git a/drivers/iio/adc/max34408.c b/drivers/iio/adc/max34408.c
index ffec22be2d59..971e6e5dee9b 100644
--- a/drivers/iio/adc/max34408.c
+++ b/drivers/iio/adc/max34408.c
@@ -161,7 +161,7 @@ static int max34408_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/*
- * calcluate current for 8bit ADC with Rsense
+ * calculate current for 8bit ADC with Rsense
* value.
* 10 mV * 1000 / Rsense uOhm = max current
* (max current * adc val * 1000) / (2^8 - 1) mA
diff --git a/drivers/iio/adc/pac1921.c b/drivers/iio/adc/pac1921.c
index 4c2a1c07bc39..c49175f2c0b7 100644
--- a/drivers/iio/adc/pac1921.c
+++ b/drivers/iio/adc/pac1921.c
@@ -1077,7 +1077,7 @@ static int pac1921_init(struct pac1921_priv *priv)
/*
* Init control register:
* - VPower free run integration mode
- * - OUT pin full scale range: 3V (HW detault)
+ * - OUT pin full scale range: 3V (HW default)
* - no timeout, no sleep, no sleep override, no recalc (HW defaults)
*/
val = FIELD_PREP(PAC1921_CONTROL_MXSL_MASK,
diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
index 203cbbc70719..67d567ee21b4 100644
--- a/drivers/iio/adc/palmas_gpadc.c
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -456,7 +456,7 @@ static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc,
* raw high threshold = (ideal threshold + INL) * gain error + offset error
*
* The gain error include both gain error, as specified in the datasheet, and
- * the gain error drift. These paramenters vary depending on device and whether
+ * the gain error drift. These parameters vary depending on device and whether
* the channel is calibrated (trimmed) or not.
*/
static int palmas_gpadc_threshold_with_tolerance(int val, const int INL,
diff --git a/drivers/iio/adc/ti-ads1298.c b/drivers/iio/adc/ti-ads1298.c
index 13cb32125eef..a6432ef1fa90 100644
--- a/drivers/iio/adc/ti-ads1298.c
+++ b/drivers/iio/adc/ti-ads1298.c
@@ -294,7 +294,7 @@ static int ads1298_get_scale(struct ads1298_private *priv,
if (ret)
return ret;
- /* Refererence in millivolts */
+ /* Reference in millivolts */
*val = regval & ADS1298_MASK_CONFIG3_VREF_4V ? 4000 : 2400;
}
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 426e3c9f88a1..d362eba6cd7c 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -494,7 +494,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
/*
* We check the complete FIFO. We programmed just one entry but in case
* something went wrong we left empty handed (-EAGAIN previously) and
- * then the value apeared somehow in the FIFO we would have two entries.
+ * then the value appeared somehow in the FIFO we would have two entries.
* Therefore we read every item and keep only the latest version of the
* requested channel.
*/
diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c
index 0253064fadec..563478e9c5eb 100644
--- a/drivers/iio/adc/twl4030-madc.c
+++ b/drivers/iio/adc/twl4030-madc.c
@@ -248,7 +248,7 @@ static const struct s16_fract twl4030_divider_ratios[16] = {
{15, 100}, /* CHANNEL 11 */
{1, 4}, /* CHANNEL 12 */
{1, 1}, /* CHANNEL 13 Reserved channels */
- {1, 1}, /* CHANNEL 14 Reseved channels */
+ {1, 1}, /* CHANNEL 14 Reserved channels */
{5, 11}, /* CHANNEL 15 */
};
diff --git a/drivers/iio/adc/xilinx-xadc-events.c b/drivers/iio/adc/xilinx-xadc-events.c
index 1bd375fb10e0..90f62377c34d 100644
--- a/drivers/iio/adc/xilinx-xadc-events.c
+++ b/drivers/iio/adc/xilinx-xadc-events.c
@@ -220,7 +220,7 @@ int xadc_write_event_value(struct iio_dev *indio_dev,
/*
* Since we store the hysteresis as relative (to the threshold)
* value, but the hardware expects an absolute value we need to
- * recalcualte this value whenever the hysteresis or the
+ * recalculate this value whenever the hysteresis or the
* threshold changes.
*/
if (xadc->threshold[offset] < xadc->temp_hysteresis)
--
2.34.1
On Thu, 26 Sep 2024 11:43:54 +0800 Yu Jiaoliang <yujiaoliang@vivo.com> wrote: > This commit fixes several typographical errors in comments within > the drivers/iio/adc directory. No functional changes are made. > > Detected using codespell. > > Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com> Applied. Thanks, Jonathan
Hello Yu, On Thu, 26 Sep 2024 11:43:54 +0800 Yu Jiaoliang <yujiaoliang@vivo.com> wrote: > This commit fixes several typographical errors in comments within > the drivers/iio/adc directory. No functional changes are made. I think it would be useful to add those typo patterns to scripts/spelling.txt, so checkpatch.pl will check them, preventing the same typos from happening in the future. With that added (perhaps in a separate patch), looks good. Luca -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
在 2024/9/26 16:19, Luca Ceresoli 写道: > Hello Yu, > > On Thu, 26 Sep 2024 11:43:54 +0800 > Yu Jiaoliang <yujiaoliang@vivo.com> wrote: > >> This commit fixes several typographical errors in comments within >> the drivers/iio/adc directory. No functional changes are made. > I think it would be useful to add those typo patterns to > scripts/spelling.txt, so checkpatch.pl will check them, preventing the > same typos from happening in the future. > > With that added (perhaps in a separate patch), looks good. Hi Luca, Thanks for the suggestion. I'll prepare a new patch that collects the typos we've encountered so far and adds them to |scripts/spelling.txt|. > > Luca Best regards, Yu
© 2016 - 2024 Red Hat, Inc.