Generalize property from MTD partitions schema and introduce property for
block partitions defined in OF.

Partition schema for block devices is a reduced schema of the MTD as
only a few property are supported for it. (reg, label and read-only)

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../bindings/block/partitions/partition.yaml  | 33 +++++++++++++++++++
 .../bindings/block/partitions/partitions.yaml | 27 +++++++++++++++
 .../bindings/mtd/partitions/partition.yaml    | 10 ++----
 3 files changed, 62 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/block/partitions/partition.yaml
 create mode 100644 Documentation/devicetree/bindings/block/partitions/partitions.yaml

diff --git a/Documentation/devicetree/bindings/block/partitions/partition.yaml b/Documentation/devicetree/bindings/block/partitions/partition.yaml
new file mode 100644
index 000000000000..b9b1d8139e56
--- /dev/null
+++ b/Documentation/devicetree/bindings/block/partitions/partition.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/block/partitions/partition.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partition
+
+description: |
+  This binding describes a single flash partition. Each partition must have its
+  relative offset and size specified. Depending on partition function extra
+  properties can be used.
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+properties:
+  reg:
+    description: partition's offset and size within the flash (in sector
+      block, 512byte)
+    maxItems: 1
+
+  label:
+    description: The label / name for this partition.
+
+  read-only:
+    description: This parameter, if present, is a hint that this partition
+      should only be mounted read-only. This is usually used for flash
+      partitions containing early-boot firmware images or data which should
+      not be clobbered.
+    type: boolean
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/block/partitions/partitions.yaml b/Documentation/devicetree/bindings/block/partitions/partitions.yaml
new file mode 100644
index 000000000000..9c161aac364d
--- /dev/null
+++ b/Documentation/devicetree/bindings/block/partitions/partitions.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/block/partitions/partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partitions
+
+description: |
+  This binding is generic and describes the content of the partitions container
+  node.
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+properties:
+  '#address-cells':
+    enum: [1, 2]
+
+  '#size-cells':
+    enum: [1, 2]
+
+patternProperties:
+  "^partition@[0-9a-f]+$":
+    $ref: partition.yaml
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
index 80d0452a2a33..e822d3219b68 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -6,6 +6,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Partition
 
+$ref: /schemas/block/partitions/partition.yaml
+
 description: |
   This binding describes a single flash partition. Each partition must have its
   relative offset and size specified. Depending on partition function extra
@@ -28,19 +30,11 @@ maintainers:
 properties:
   reg:
     description: partition's offset and size within the flash
-    maxItems: 1
 
   label:
     description: The label / name for this partition. If omitted, the label
       is taken from the node name (excluding the unit address).
 
-  read-only:
-    description: This parameter, if present, is a hint that this partition
-      should only be mounted read-only. This is usually used for flash
-      partitions containing early-boot firmware images or data which should
-      not be clobbered.
-    type: boolean
-
   lock:
     description: Do not unlock the partition at initialization time (not
       supported on all devices)
-- 
2.45.2

On Wed, Sep 25, 2024 at 11:45:24PM +0200, Christian Marangi wrote:
> Generalize property from MTD partitions schema and introduce property for
> block partitions defined in OF.
> 
> Partition schema for block devices is a reduced schema of the MTD as
> only a few property are supported for it. (reg, label and read-only)
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>  .../bindings/block/partitions/partition.yaml  | 33 +++++++++++++++++++
>  .../bindings/block/partitions/partitions.yaml | 27 +++++++++++++++
>  .../bindings/mtd/partitions/partition.yaml    | 10 ++----
>  3 files changed, 62 insertions(+), 8 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/block/partitions/partition.yaml
>  create mode 100644 Documentation/devicetree/bindings/block/partitions/partitions.yaml

Partitions are partitions. We don't need them defined in both mtd and 
block. Could perhaps move them to bindings/partitions/, but that's not 
really worth it in my opinion. Just use and add to what's in mtd.

> 
> diff --git a/Documentation/devicetree/bindings/block/partitions/partition.yaml b/Documentation/devicetree/bindings/block/partitions/partition.yaml
> new file mode 100644
> index 000000000000..b9b1d8139e56
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/block/partitions/partition.yaml
> @@ -0,0 +1,33 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/block/partitions/partition.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Partition
> +
> +description: |

Don't need '|' if no formatting.

> +  This binding describes a single flash partition. Each partition must have its
> +  relative offset and size specified. Depending on partition function extra
> +  properties can be used.
> +
> +maintainers:
> +  - Christian Marangi <ansuelsmth@gmail.com>
> +
> +properties:
> +  reg:
> +    description: partition's offset and size within the flash (in sector
> +      block, 512byte)
> +    maxItems: 1
> +
> +  label:
> +    description: The label / name for this partition.
> +
> +  read-only:
> +    description: This parameter, if present, is a hint that this partition
> +      should only be mounted read-only. This is usually used for flash
> +      partitions containing early-boot firmware images or data which should
> +      not be clobbered.
> +    type: boolean
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/block/partitions/partitions.yaml b/Documentation/devicetree/bindings/block/partitions/partitions.yaml
> new file mode 100644
> index 000000000000..9c161aac364d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/block/partitions/partitions.yaml
> @@ -0,0 +1,27 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/block/partitions/partitions.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Partitions
> +
> +description: |
> +  This binding is generic and describes the content of the partitions container
> +  node.
> +
> +maintainers:
> +  - Christian Marangi <ansuelsmth@gmail.com>
> +
> +properties:
> +  '#address-cells':
> +    enum: [1, 2]
> +
> +  '#size-cells':
> +    enum: [1, 2]


Like *all* other 'partitions' nodes, you need a compatible to say what 
kind of partitions you have. It's conceivable that some vendor invented 
their own scheme just like MTD devices.

As I said before, this is just 'fixed-partitions'. If some properties 
aren't supported, that's fine. All the 'align' properties are for 
flashing tools and aren't supported in Linux. 

Rob