This patch corrects spelling errors in comments within
the media/dvb-frontends directory found by codespell to enhance
clarity and maintainability of the code.
This change does not affect the functionality.

Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
---
 drivers/media/dvb-frontends/bcm3510.c      | 2 +-
 drivers/media/dvb-frontends/dib0090.c      | 4 ++--
 drivers/media/dvb-frontends/dib3000mb.c    | 2 +-
 drivers/media/dvb-frontends/stv6111.c      | 2 +-
 drivers/media/dvb-frontends/tda18271c2dd.c | 2 +-
 drivers/media/dvb-frontends/zl10036.c      | 2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/media/dvb-frontends/bcm3510.c b/drivers/media/dvb-frontends/bcm3510.c
index 27f1de21f571..d935fb10e620 100644
--- a/drivers/media/dvb-frontends/bcm3510.c
+++ b/drivers/media/dvb-frontends/bcm3510.c
@@ -729,7 +729,7 @@ static int bcm3510_init_cold(struct bcm3510_state *st)
 	int ret;
 	bcm3510_register_value v;
 
-	/* read Acquisation Processor status register and check it is not in RUN mode */
+	/* read Acquisition Processor status register and check it is not in RUN mode */
 	if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
 		return ret;
 	if (v.APSTAT1_a2.RUN) {
diff --git a/drivers/media/dvb-frontends/dib0090.c b/drivers/media/dvb-frontends/dib0090.c
index c958bcff026e..6cbbb351d545 100644
--- a/drivers/media/dvb-frontends/dib0090.c
+++ b/drivers/media/dvb-frontends/dib0090.c
@@ -78,7 +78,7 @@ MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
 #define SOC_8090_P1G_11R1 0x86
 #define SOC_8090_P1G_21R1 0x8e
 
-/* else use thos ones to check */
+/* else use those ones to check */
 #define P1A_B      0x0
 #define P1C	   0x1
 #define P1D_E_F    0x3
@@ -1574,7 +1574,7 @@ static int dib0090_reset(struct dvb_frontend *fe)
 	if (((state->identity.version & 0x1f) >= P1D_E_F) || (state->identity.in_soc))
 		dib0090_set_EFUSE(state);
 
-	/* Congigure in function of the crystal */
+	/* Configure in function of the crystal */
 	if (state->config->force_crystal_mode != 0)
 		dib0090_write_reg(state, 0x14,
 				state->config->force_crystal_mode & 3);
diff --git a/drivers/media/dvb-frontends/dib3000mb.c b/drivers/media/dvb-frontends/dib3000mb.c
index c598b2a63325..822639f11c04 100644
--- a/drivers/media/dvb-frontends/dib3000mb.c
+++ b/drivers/media/dvb-frontends/dib3000mb.c
@@ -640,7 +640,7 @@ static int dib3000mb_read_ber(struct dvb_frontend* fe, u32 *ber)
 	return 0;
 }
 
-/* see dib3000-watch dvb-apps for exact calcuations of signal_strength and snr */
+/* see dib3000-watch dvb-apps for exact calculations of signal_strength and snr */
 static int dib3000mb_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
 {
 	struct dib3000_state* state = fe->demodulator_priv;
diff --git a/drivers/media/dvb-frontends/stv6111.c b/drivers/media/dvb-frontends/stv6111.c
index 2d0adb6fcb08..0ac15273922d 100644
--- a/drivers/media/dvb-frontends/stv6111.c
+++ b/drivers/media/dvb-frontends/stv6111.c
@@ -161,7 +161,7 @@ static const struct slookup gain_rfagc_lookup[] = {
 };
 
 /*
- * This table is 6 dB too low comapred to the others (probably created with
+ * This table is 6 dB too low compared to the others (probably created with
  * a different BB_MAG setting)
  */
 static const struct slookup gain_channel_agc_nf_lookup[] = {
diff --git a/drivers/media/dvb-frontends/tda18271c2dd.c b/drivers/media/dvb-frontends/tda18271c2dd.c
index fd928787207e..c11563853c07 100644
--- a/drivers/media/dvb-frontends/tda18271c2dd.c
+++ b/drivers/media/dvb-frontends/tda18271c2dd.c
@@ -954,7 +954,7 @@ static int RFTrackingFiltersCorrection(struct tda_state *state,
 			Capprox = 255;
 
 
-		/* TODO Temperature compensation. There is defenitely a scale factor */
+		/* TODO Temperature compensation. There is definitely a scale factor */
 		/*      missing in the datasheet, so leave it out for now.           */
 		state->m_Regs[EB14] = Capprox;
 
diff --git a/drivers/media/dvb-frontends/zl10036.c b/drivers/media/dvb-frontends/zl10036.c
index 3df055be66d6..5ad987c6861b 100644
--- a/drivers/media/dvb-frontends/zl10036.c
+++ b/drivers/media/dvb-frontends/zl10036.c
@@ -89,7 +89,7 @@ static int zl10036_write(struct zl10036_state *state, u8 buf[], u8 count)
 	int ret;
 
 	if (zl10036_debug & 0x02) {
-		/* every 8bit-value satisifes this!
+		/* every 8bit-value satisfies this!
 		 * so only check for debug log */
 		if ((buf[0] & 0x80) == 0x00)
 			reg = 2;
-- 
2.34.1