DeepComputing is creating a RISC-V Framework Laptop 13 Mainboard 
powered by a StarFive JH7110 processor.This is a developer-focused 
product, aimed at making tinkering with RISC-V more accessible.
The Mainboard is under development and we'll share more on functionality, 
compatibility, and availability as the program progresses.

Framework Model: Framework FRANME0000
DeepComputing Model: DeepComputing fm7110

V1:
- Add framework dts and config.

V2:
- Add deepcomputing into vendor list.
- Add deepcomputing,fm7110 into model compatible list. 
- Fix the error about dtbs_check.
- Framework Config will be included in later patch.

V3:
- Update board features into description

Sandie Cao (3):
  dt-bindings: vendor: add deepcomputing
  dt-bindings: riscv: starfive: add deepcomputing,fm7110
  riscv: dts: starfive: add framework dts

 .../devicetree/bindings/riscv/starfive.yaml   |  1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 ++
 arch/riscv/boot/dts/starfive/Makefile         |  1 +
 .../boot/dts/starfive/jh7110-framework.dts    | 34 +++++++++++++++++++
 4 files changed, 38 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110-framework.dts


base-commit: abf2050f51fdca0fd146388f83cddd95a57a008d
-- 
2.34.1

On 25/09/2024 07:31, Sandie Cao wrote:
> DeepComputing is creating a RISC-V Framework Laptop 13 Mainboard 
> powered by a StarFive JH7110 processor.This is a developer-focused 
> product, aimed at making tinkering with RISC-V more accessible.
> The Mainboard is under development and we'll share more on functionality, 
> compatibility, and availability as the program progresses.
> 
> Framework Model: Framework FRANME0000
> DeepComputing Model: DeepComputing fm7110
> 
> V1:
> - Add framework dts and config.

You got two times the same feedback - you send patches incorrectly with
broken threading. Two times you ignored it.

This is the third time.

Making mistake is fine, we all make. Making same mistake twice is wrong.
Means you do not learn.

Making same mistake three times, is wasting my time.

NAK.

Start using 'b4' tool if you do not understand how to use 'git
format-patch'.

Best regards,
Krzysztof