Add initial support for Qualcomm QCS8300 RIDE board which enables
DSPs, UFS and booting to shell with uart console.
[Xin: added ufs/adsp/gpdsp nodes]
Co-developed-by: Xin Liu <quic_liuxin@quicinc.com>
Signed-off-by: Xin Liu <quic_liuxin@quicinc.com>
[Tingguo: added the rpmhpd nodes]
Co-developed-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 267 ++++++++++++++++++++++++++++++
2 files changed, 268 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index ae002c7cf126..b69be54829ea 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
new file mode 100644
index 000000000000..7eed19a694c3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "qcs8300.dtsi"
+/ {
+ model = "Qualcomm Technologies, Inc. QCS8300 Ride";
+ compatible = "qcom,qcs8300-ride", "qcom,qcs8300";
+ chassis-type = "embedded";
+
+ aliases {
+ serial0 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clocks {
+ xo_board_clk: xo-board-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vreg_s4a: smps4 {
+ regulator-name = "vreg_s4a";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9a: smps9 {
+ regulator-name = "vreg_s9a";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a: ldo3 {
+ regulator-name = "vreg_l3a";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4a: ldo4 {
+ regulator-name = "vreg_l4a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a: ldo5 {
+ regulator-name = "vreg_l5a";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a: ldo6 {
+ regulator-name = "vreg_l6a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a: ldo7 {
+ regulator-name = "vreg_l7a";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a: ldo8 {
+ regulator-name = "vreg_l8a";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a: ldo9 {
+ regulator-name = "vreg_l9a";
+ regulator-min-microvolt = <2970000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pmm8654au-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_s5c: smps5 {
+ regulator-name = "vreg_s5c";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c: ldo4 {
+ regulator-name = "vreg_l4c";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c: ldo6 {
+ regulator-name = "vreg_l6c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c: ldo7 {
+ regulator-name = "vreg_l7c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c: ldo9 {
+ regulator-name = "vreg_l9c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gcc {
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/qcs8300/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcs8300/cdsp0.mbn";
+ status = "okay";
+};
+
+&remoteproc_gpdsp {
+ firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+ status = "okay";
+};
+
+&rpmhcc {
+ clocks = <&xo_board_clk>;
+ clock-names = "xo";
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l8a>;
+ vcc-max-microamp = <1100000>;
+ vccq-supply = <&vreg_l4c>;
+ vccq-max-microamp = <1200000>;
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l5a>;
+ status = "okay";
+};
--
2.25.1Hi Jingyi,
kernel test robot noticed the following build errors:
[auto build test ERROR on 4d0326b60bb753627437fff0f76bf1525bcda422]
url: https://github.com/intel-lab-lkp/linux/commits/Jingyi-Wang/dt-bindings-arm-qcom-document-QCS8300-SoC-and-reference-board/20240925-184548
base: 4d0326b60bb753627437fff0f76bf1525bcda422
patch link: https://lore.kernel.org/r/20240925-qcs8300_initial_dtsi-v2-4-494c40fa2a42%40quicinc.com
patch subject: [PATCH v2 4/4] arm64: dts: qcom: add base QCS8300 RIDE dts
config: arm64-randconfig-004-20240928 (https://download.01.org/0day-ci/archive/20240928/202409280919.8HQTWaY2-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 14.1.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240928/202409280919.8HQTWaY2-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202409280919.8HQTWaY2-lkp@intel.com/
All errors (new ones prefixed by >>):
In file included from arch/arm64/boot/dts/qcom/qcs8300-ride.dts:11:
>> arch/arm64/boot/dts/qcom/qcs8300.dtsi:6:10: fatal error: dt-bindings/clock/qcom,qcs8300-gcc.h: No such file or directory
6 | #include <dt-bindings/clock/qcom,qcs8300-gcc.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
vim +6 arch/arm64/boot/dts/qcom/qcs8300.dtsi
27f221d22e92b6 Jingyi Wang 2024-09-25 @6 #include <dt-bindings/clock/qcom,qcs8300-gcc.h>
27f221d22e92b6 Jingyi Wang 2024-09-25 7 #include <dt-bindings/clock/qcom,rpmh.h>
27f221d22e92b6 Jingyi Wang 2024-09-25 8 #include <dt-bindings/interconnect/qcom,icc.h>
27f221d22e92b6 Jingyi Wang 2024-09-25 9 #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
27f221d22e92b6 Jingyi Wang 2024-09-25 10 #include <dt-bindings/interrupt-controller/arm-gic.h>
27f221d22e92b6 Jingyi Wang 2024-09-25 11 #include <dt-bindings/mailbox/qcom-ipcc.h>
27f221d22e92b6 Jingyi Wang 2024-09-25 12 #include <dt-bindings/power/qcom,rpmhpd.h>
27f221d22e92b6 Jingyi Wang 2024-09-25 13 #include <dt-bindings/power/qcom-rpmpd.h>
27f221d22e92b6 Jingyi Wang 2024-09-25 14 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
27f221d22e92b6 Jingyi Wang 2024-09-25 15
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
On 9/28/2024 10:00 AM, kernel test robot wrote: > Hi Jingyi, > > kernel test robot noticed the following build errors: > > [auto build test ERROR on 4d0326b60bb753627437fff0f76bf1525bcda422] > > url: https://github.com/intel-lab-lkp/linux/commits/Jingyi-Wang/dt-bindings-arm-qcom-document-QCS8300-SoC-and-reference-board/20240925-184548 > base: 4d0326b60bb753627437fff0f76bf1525bcda422 > patch link: https://lore.kernel.org/r/20240925-qcs8300_initial_dtsi-v2-4-494c40fa2a42%40quicinc.com > patch subject: [PATCH v2 4/4] arm64: dts: qcom: add base QCS8300 RIDE dts > config: arm64-randconfig-004-20240928 (https://download.01.org/0day-ci/archive/20240928/202409280919.8HQTWaY2-lkp@intel.com/config) > compiler: aarch64-linux-gcc (GCC) 14.1.0 > reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240928/202409280919.8HQTWaY2-lkp@intel.com/reproduce) > > If you fix the issue in a separate patch/commit (i.e. not just a new version of > the same patch/commit), kindly add following tags > | Reported-by: kernel test robot <lkp@intel.com> > | Closes: https://lore.kernel.org/oe-kbuild-all/202409280919.8HQTWaY2-lkp@intel.com/ > > All errors (new ones prefixed by >>): > > In file included from arch/arm64/boot/dts/qcom/qcs8300-ride.dts:11: >>> arch/arm64/boot/dts/qcom/qcs8300.dtsi:6:10: fatal error: dt-bindings/clock/qcom,qcs8300-gcc.h: No such file or directory > 6 | #include <dt-bindings/clock/qcom,qcs8300-gcc.h> > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > compilation terminated. > > > vim +6 arch/arm64/boot/dts/qcom/qcs8300.dtsi > > 27f221d22e92b6 Jingyi Wang 2024-09-25 @6 #include <dt-bindings/clock/qcom,qcs8300-gcc.h> > 27f221d22e92b6 Jingyi Wang 2024-09-25 7 #include <dt-bindings/clock/qcom,rpmh.h> > 27f221d22e92b6 Jingyi Wang 2024-09-25 8 #include <dt-bindings/interconnect/qcom,icc.h> > 27f221d22e92b6 Jingyi Wang 2024-09-25 9 #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h> > 27f221d22e92b6 Jingyi Wang 2024-09-25 10 #include <dt-bindings/interrupt-controller/arm-gic.h> > 27f221d22e92b6 Jingyi Wang 2024-09-25 11 #include <dt-bindings/mailbox/qcom-ipcc.h> > 27f221d22e92b6 Jingyi Wang 2024-09-25 12 #include <dt-bindings/power/qcom,rpmhpd.h> > 27f221d22e92b6 Jingyi Wang 2024-09-25 13 #include <dt-bindings/power/qcom-rpmpd.h> > 27f221d22e92b6 Jingyi Wang 2024-09-25 14 #include <dt-bindings/soc/qcom,rpmh-rsc.h> > 27f221d22e92b6 Jingyi Wang 2024-09-25 15 > compilation err caused by build dependency in the cover letter not merged yet. Thanks, Jingyi
On 25/09/2024 12:43, Jingyi Wang wrote: > Add initial support for Qualcomm QCS8300 RIDE board which enables > DSPs, UFS and booting to shell with uart console. > > [Xin: added ufs/adsp/gpdsp nodes] > Co-developed-by: Xin Liu <quic_liuxin@quicinc.com> > Signed-off-by: Xin Liu <quic_liuxin@quicinc.com> > [Tingguo: added the rpmhpd nodes] > Co-developed-by: Tingguo Cheng <quic_tingguoc@quicinc.com> > Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com> > Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 267 ++++++++++++++++++++++++++++++ > 2 files changed, 268 insertions(+) > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
© 2016 - 2024 Red Hat, Inc.