mmc: core: Only set maximum DMA segment size if DMA is supported

[PATCH] mmc: core: Only set maximum DMA segment size if DMA is supported

Posted by Guenter Roeck 2 months ago

Since upstream commit 334304ac2bac ("dma-mapping: don't return errors
from dma_set_max_seg_size") calling dma_set_max_seg_size() on a device
not supporting DMA results in a warning traceback. This is seen when
booting the sifive_u machine from SD. The underlying SPI controller
(sifive,spi0 compatible) explicitly sets dma_mask to NULL.

Avoid the backtrace by only calling dma_set_max_seg_size() if DMA is
supported.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/mmc/core/queue.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
index d0b3ca8a11f0..4d6844261912 100644
--- a/drivers/mmc/core/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -388,7 +388,8 @@ static struct gendisk *mmc_alloc_disk(struct mmc_queue *mq,
 
 	blk_queue_rq_timeout(mq->queue, 60 * HZ);
 
-	dma_set_max_seg_size(mmc_dev(host), queue_max_segment_size(mq->queue));
+	if (mmc_dev(host)->dma_parms)
+		dma_set_max_seg_size(mmc_dev(host), queue_max_segment_size(mq->queue));
 
 	INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler);
 	INIT_WORK(&mq->complete_work, mmc_blk_mq_complete_work);
-- 
2.45.2

Re: [PATCH] mmc: core: Only set maximum DMA segment size if DMA is supported

Posted by Ulf Hansson 1 month, 3 weeks ago

On Tue, 24 Sept 2024 at 23:01, Guenter Roeck <linux@roeck-us.net> wrote:
>
> Since upstream commit 334304ac2bac ("dma-mapping: don't return errors
> from dma_set_max_seg_size") calling dma_set_max_seg_size() on a device
> not supporting DMA results in a warning traceback. This is seen when
> booting the sifive_u machine from SD. The underlying SPI controller
> (sifive,spi0 compatible) explicitly sets dma_mask to NULL.
>
> Avoid the backtrace by only calling dma_set_max_seg_size() if DMA is
> supported.
>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Applied for fixes, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/core/queue.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
> index d0b3ca8a11f0..4d6844261912 100644
> --- a/drivers/mmc/core/queue.c
> +++ b/drivers/mmc/core/queue.c
> @@ -388,7 +388,8 @@ static struct gendisk *mmc_alloc_disk(struct mmc_queue *mq,
>
>         blk_queue_rq_timeout(mq->queue, 60 * HZ);
>
> -       dma_set_max_seg_size(mmc_dev(host), queue_max_segment_size(mq->queue));
> +       if (mmc_dev(host)->dma_parms)
> +               dma_set_max_seg_size(mmc_dev(host), queue_max_segment_size(mq->queue));
>
>         INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler);
>         INIT_WORK(&mq->complete_work, mmc_blk_mq_complete_work);
> --
> 2.45.2
>

Re: [PATCH] mmc: core: Only set maximum DMA segment size if DMA is supported

Posted by Geert Uytterhoeven 1 month, 4 weeks ago

On Tue, Sep 24, 2024 at 11:01 PM Guenter Roeck <linux@roeck-us.net> wrote:
> Since upstream commit 334304ac2bac ("dma-mapping: don't return errors
> from dma_set_max_seg_size") calling dma_set_max_seg_size() on a device
> not supporting DMA results in a warning traceback. This is seen when
> booting the sifive_u machine from SD. The underlying SPI controller
> (sifive,spi0 compatible) explicitly sets dma_mask to NULL.

Thanks, seeing the same with mmc_spi on SiPeed MAIX BiT.

> Avoid the backtrace by only calling dma_set_max_seg_size() if DMA is
> supported.
>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH] mmc: core: Only set maximum DMA segment size if DMA is supported

Posted by Robin Murphy 2 months ago

On 24/09/2024 10:01 pm, Guenter Roeck wrote:
> Since upstream commit 334304ac2bac ("dma-mapping: don't return errors
> from dma_set_max_seg_size") calling dma_set_max_seg_size() on a device
> not supporting DMA results in a warning traceback. This is seen when
> booting the sifive_u machine from SD. The underlying SPI controller
> (sifive,spi0 compatible) explicitly sets dma_mask to NULL.

Hmm, that driver probably shouldn't be doing that, but either way it's 
not actually relevant to this check - what's significant is that when 
the MMC host device is an "mmc-spi-slot" instance, its mmc_dev() ends up 
being the SPI *device* itself, not the grandparent SPI controller.

Thus the patch itself is appropriate on the basis that MMC hosts may 
exist on non-DMA-capable buses, so the subsystem needs to consider that.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>

> Avoid the backtrace by only calling dma_set_max_seg_size() if DMA is
> supported.
> 
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
>   drivers/mmc/core/queue.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
> index d0b3ca8a11f0..4d6844261912 100644
> --- a/drivers/mmc/core/queue.c
> +++ b/drivers/mmc/core/queue.c
> @@ -388,7 +388,8 @@ static struct gendisk *mmc_alloc_disk(struct mmc_queue *mq,
>   
>   	blk_queue_rq_timeout(mq->queue, 60 * HZ);
>   
> -	dma_set_max_seg_size(mmc_dev(host), queue_max_segment_size(mq->queue));
> +	if (mmc_dev(host)->dma_parms)
> +		dma_set_max_seg_size(mmc_dev(host), queue_max_segment_size(mq->queue));
>   
>   	INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler);
>   	INIT_WORK(&mq->complete_work, mmc_blk_mq_complete_work);

Re: [PATCH] mmc: core: Only set maximum DMA segment size if DMA is supported

Posted by Christoph Hellwig 2 months ago

On Tue, Sep 24, 2024 at 02:01:23PM -0700, Guenter Roeck wrote:
> Since upstream commit 334304ac2bac ("dma-mapping: don't return errors
> from dma_set_max_seg_size") calling dma_set_max_seg_size() on a device
> not supporting DMA results in a warning traceback. This is seen when
> booting the sifive_u machine from SD. The underlying SPI controller
> (sifive,spi0 compatible) explicitly sets dma_mask to NULL.
> 
> Avoid the backtrace by only calling dma_set_max_seg_size() if DMA is
> supported.

Technicall this looks fine, although it would be nice avoid the overly
long line.

Reviewed-by: Christoph Hellwig <hch@lst.de>