arm64: dts: freescale: imx8mp-verdin: Add Ivy carrier

[PATCH v1 2/3] arm64: dts: freescale: imx8mp-verdin: add labels to som nodes

Posted by Francesco Dolcini 1 year, 4 months ago

From: João Paulo Gonçalves <joao.goncalves@toradex.com>

Add labels to ti-ads1015 and fec ethernet mdio node to make it easier to
reference them from other nodes.

Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index a19ad5ee7f79..e9518b7c7aa8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -320,7 +320,7 @@ &fec {
 	pinctrl-0 = <&pinctrl_fec>;
 	pinctrl-1 = <&pinctrl_fec_sleep>;
 
-	mdio {
+	verdin_eth2_mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -591,11 +591,12 @@ hwmon_temp_module: sensor@48 {
 		vs-supply = <&reg_vdd_1v8>;
 	};
 
-	adc@49 {
+	verdin_som_adc: adc@49 {
 		compatible = "ti,ads1015";
 		reg = <0x49>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		#io-channel-cells = <1>;
 
 		/* Verdin I2C_1 (ADC_4 - ADC_3) */
 		channel@0 {
-- 
2.39.5

Re: [PATCH v1 2/3] arm64: dts: freescale: imx8mp-verdin: add labels to som nodes

Posted by Frank Li 1 year, 4 months ago

On Tue, Sep 24, 2024 at 01:40:52PM +0200, Francesco Dolcini wrote:
> From: João Paulo Gonçalves <joao.goncalves@toradex.com>
>
> Add labels to ti-ads1015 and fec ethernet mdio node to make it easier to
> reference them from other nodes.
>
> Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> index a19ad5ee7f79..e9518b7c7aa8 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> @@ -320,7 +320,7 @@ &fec {
>  	pinctrl-0 = <&pinctrl_fec>;
>  	pinctrl-1 = <&pinctrl_fec_sleep>;
>
> -	mdio {
> +	verdin_eth2_mdio: mdio {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>
> @@ -591,11 +591,12 @@ hwmon_temp_module: sensor@48 {
>  		vs-supply = <&reg_vdd_1v8>;
>  	};
>
> -	adc@49 {
> +	verdin_som_adc: adc@49 {
>  		compatible = "ti,ads1015";
>  		reg = <0x49>;
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> +		#io-channel-cells = <1>;

Why add this? it is not related with what descript in commit message

Frank

>
>  		/* Verdin I2C_1 (ADC_4 - ADC_3) */
>  		channel@0 {
> --
> 2.39.5
>

Re: [PATCH v1 2/3] arm64: dts: freescale: imx8mp-verdin: add labels to som nodes

Posted by João Paulo Gonçalves 1 year, 4 months ago

Hi Frank,

On Tue, Sep 24, 2024 at 11:02:50AM -0400, Frank Li wrote:
> On Tue, Sep 24, 2024 at 01:40:52PM +0200, Francesco Dolcini wrote:
> > From: João Paulo Gonçalves <joao.goncalves@toradex.com>
> >
> > Add labels to ti-ads1015 and fec ethernet mdio node to make it easier to
> > reference them from other nodes.
> >
> > Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
> > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> > index a19ad5ee7f79..e9518b7c7aa8 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> > @@ -320,7 +320,7 @@ &fec {
> >  	pinctrl-0 = <&pinctrl_fec>;
> >  	pinctrl-1 = <&pinctrl_fec_sleep>;
> >
> > -	mdio {
> > +	verdin_eth2_mdio: mdio {
> >  		#address-cells = <1>;
> >  		#size-cells = <0>;
> >
> > @@ -591,11 +591,12 @@ hwmon_temp_module: sensor@48 {
> >  		vs-supply = <&reg_vdd_1v8>;
> >  	};
> >
> > -	adc@49 {
> > +	verdin_som_adc: adc@49 {
> >  		compatible = "ti,ads1015";
> >  		reg = <0x49>;
> >  		#address-cells = <1>;
> >  		#size-cells = <0>;
> > +		#io-channel-cells = <1>;
> 
> Why add this? it is not related with what descript in commit message

The #io-channel-cells property is required to reference the ADC
node as an IIO channel producer in consumer nodes, otherwise, DT check
warnings will occur. I agree that the commit message could be improved,
but I consider this a minor issue. Would it be acceptable to keep it as
is, or would you prefer a v2?

Best Regards,
João Paulo Gonçalves

Re: [PATCH v1 2/3] arm64: dts: freescale: imx8mp-verdin: add labels to som nodes

Posted by Frank Li 1 year, 4 months ago

On Tue, Sep 24, 2024 at 02:02:54PM -0300, João Paulo Gonçalves wrote:
> Hi Frank,
>
> On Tue, Sep 24, 2024 at 11:02:50AM -0400, Frank Li wrote:
> > On Tue, Sep 24, 2024 at 01:40:52PM +0200, Francesco Dolcini wrote:
> > > From: João Paulo Gonçalves <joao.goncalves@toradex.com>
> > >
> > > Add labels to ti-ads1015 and fec ethernet mdio node to make it easier to
> > > reference them from other nodes.
> > >
> > > Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
> > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> > > ---
> > >  arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 5 +++--
> > >  1 file changed, 3 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> > > index a19ad5ee7f79..e9518b7c7aa8 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
> > > @@ -320,7 +320,7 @@ &fec {
> > >  	pinctrl-0 = <&pinctrl_fec>;
> > >  	pinctrl-1 = <&pinctrl_fec_sleep>;
> > >
> > > -	mdio {
> > > +	verdin_eth2_mdio: mdio {
> > >  		#address-cells = <1>;
> > >  		#size-cells = <0>;
> > >
> > > @@ -591,11 +591,12 @@ hwmon_temp_module: sensor@48 {
> > >  		vs-supply = <&reg_vdd_1v8>;
> > >  	};
> > >
> > > -	adc@49 {
> > > +	verdin_som_adc: adc@49 {
> > >  		compatible = "ti,ads1015";
> > >  		reg = <0x49>;
> > >  		#address-cells = <1>;
> > >  		#size-cells = <0>;
> > > +		#io-channel-cells = <1>;
> >
> > Why add this? it is not related with what descript in commit message
>
> The #io-channel-cells property is required to reference the ADC
> node as an IIO channel producer in consumer nodes, otherwise, DT check
> warnings will occur. I agree that the commit message could be improved,
> but I consider this a minor issue. Would it be acceptable to keep it as
> is, or would you prefer a v2?

Personally, I like one patch fix one problem. I am okay if mentioned in
commit message. Anyway, it is up to guo shanw's opinion.

Frank

>
> Best Regards,
> João Paulo Gonçalves