[PATCH v2] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting for TPM

Delphine CC Chiu posted 1 patch 2 months, 1 week ago
.../aspeed/aspeed-bmc-facebook-yosemite4.dts   | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
[PATCH v2] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting for TPM
Posted by Delphine CC Chiu 2 months, 1 week ago
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>

Enable spi-gpio setting for TPM device in yosemite4.

Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts   | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..869aa8b3f411 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -34,6 +34,24 @@ iio-hwmon {
 				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
 				<&adc1 0>, <&adc1 1>;
 	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
+	};
 };
 
 &uart1 {
-- 
2.25.1
Re: [PATCH v2] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting for TPM
Posted by Andrew Jeffery 2 months, 1 week ago
On Fri, 2024-09-20 at 16:02 +0800, Delphine CC Chiu wrote:
> From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
> 
> Enable spi-gpio setting for TPM device in yosemite4.
> 

Thanks, I've applied this to be picked up through the BMC tree.

Andrew