Add device tree binding details for Canaan K230 pinctrl device.
Signed-off-by: Ze Huang <18771902331@163.com>
---
.../bindings/pinctrl/canaan,k230-pinctrl.yaml | 128 ++++++++++++++++++
1 file changed, 128 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
new file mode 100644
index 000000000000..979c5bd71e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/canaan,k230-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K230 Pin Controller
+
+maintainers:
+ - Ze Huang <18771902331@163.com>
+
+description:
+ The Canaan Kendryte K230 platform includes 64 IO pins, each capable of
+ multiplexing up to 5 different functions. Pin function configuration is
+ performed on a per-pin basis.
+
+properties:
+ compatible:
+ const: canaan,k230-pinctrl
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+ description:
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine.
+
+ patternProperties:
+ '-cfg$':
+ type: object
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+ additionalProperties: false
+ description:
+ Each subnode will list the pins it needs, and how they should
+ be configured, with regard to muxer configuration, bias, input
+ enable/disable, input schmitt trigger, slew-rate enable/disable,
+ slew-rate, drive strength.
+
+ properties:
+ pinmux:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ The list of GPIOs and their mux settings that properties in
+ the node apply to. This should be set with the macro
+ 'K230_PINMUX(pin, mode)'
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ drive-strength:
+ minimum: 0
+ maximum: 15
+
+ input-enable: true
+
+ output-enable: true
+
+ input-schmitt-enable: true
+
+ slew-rate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ slew rate control enable
+ 0: disable
+ 1: enable
+
+ enum: [0, 1]
+
+ power-source:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specifies the power source voltage for the IO bank that the
+ pin belongs to. Each bank of IO pins operate at a specific,
+ fixed voltage levels. Incorrect voltage configuration can
+ damage the chip. The defined constants represent the
+ possible voltage configurations:
+
+ - K230_MSC_3V3 (value 0): 3.3V power supply
+ - K230_MSC_1V8 (value 1): 1.8V power supply
+
+ The following banks have the corresponding voltage
+ configurations:
+
+ - bank IO0 to IO1: Fixed at 1.8V
+ - bank IO2 to IO13: Fixed at 1.8V
+ - bank IO14 to IO25: Fixed at 1.8V
+ - bank IO26 to IO37: Fixed at 1.8V
+ - bank IO38 to IO49: Fixed at 1.8V
+ - bank IO50 to IO61: Fixed at 3.3V
+ - bank IO62 to IO63: Fixed at 1.8V
+
+ enum: [0, 1]
+
+ required:
+ - pinmux
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl: pinctrl@91105000 {
+ compatible = "canaan,k230-pinctrl";
+ reg = <0x91105000 0x100>;
+
+ uart2_pins: uart2-pins {
+ uart2-pins-cfg {
+ pinmux = <0x503>, /* uart2 txd */
+ <0x603>; /* uart2 rxd */
+ slew-rate = <0>;
+ drive-strength = <4>;
+ power-source = <1>;
+ input-enable;
+ output-enable;
+ bias-disable;
+ };
+ };
+ };
--
2.46.1On Mon, Sep 16, 2024 at 02:42:23PM +0800, Ze Huang wrote:
> Add device tree binding details for Canaan K230 pinctrl device.
>
> Signed-off-by: Ze Huang <18771902331@163.com>
> ---
> .../bindings/pinctrl/canaan,k230-pinctrl.yaml | 128 ++++++++++++++++++
> 1 file changed, 128 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
> new file mode 100644
> index 000000000000..979c5bd71e3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
> @@ -0,0 +1,128 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/canaan,k230-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Canaan Kendryte K230 Pin Controller
> +
> +maintainers:
> + - Ze Huang <18771902331@163.com>
> +
> +description:
> + The Canaan Kendryte K230 platform includes 64 IO pins, each capable of
> + multiplexing up to 5 different functions. Pin function configuration is
> + performed on a per-pin basis.
> +
> +properties:
> + compatible:
> + const: canaan,k230-pinctrl
> +
> + reg:
> + maxItems: 1
> +
> +patternProperties:
> + '-pins$':
> + type: object
> + additionalProperties: false
> + description:
> + A pinctrl node should contain at least one subnode representing the
> + pinctrl groups available on the machine.
> +
> + patternProperties:
> + '-cfg$':
> + type: object
> + $ref: /schemas/pinctrl/pincfg-node.yaml
> + additionalProperties: false
> + description:
> + Each subnode will list the pins it needs, and how they should
> + be configured, with regard to muxer configuration, bias, input
> + enable/disable, input schmitt trigger, slew-rate enable/disable,
> + slew-rate, drive strength.
> +
> + properties:
> + pinmux:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
Drop. You need to add a $ref to pinmux-node.yaml (alongside
pincfg-node.yaml).
> + description:
> + The list of GPIOs and their mux settings that properties in
> + the node apply to. This should be set with the macro
> + 'K230_PINMUX(pin, mode)'
> +
> + bias-disable: true
> +
> + bias-pull-up: true
> +
> + bias-pull-down: true
> +
> + drive-strength:
> + minimum: 0
> + maximum: 15
> +
> + input-enable: true
> +
> + output-enable: true
> +
> + input-schmitt-enable: true
> +
> + slew-rate:
> + $ref: /schemas/types.yaml#/definitions/uint32
Drop. Already has a defined type.
> + description: |
> + slew rate control enable
> + 0: disable
> + 1: enable
> +
> + enum: [0, 1]
> +
> + power-source:
> + $ref: /schemas/types.yaml#/definitions/uint32
Drop. Already has a defined type.
> + description: |
> + Specifies the power source voltage for the IO bank that the
> + pin belongs to. Each bank of IO pins operate at a specific,
> + fixed voltage levels. Incorrect voltage configuration can
> + damage the chip. The defined constants represent the
> + possible voltage configurations:
> +
> + - K230_MSC_3V3 (value 0): 3.3V power supply
> + - K230_MSC_1V8 (value 1): 1.8V power supply
> +
> + The following banks have the corresponding voltage
> + configurations:
> +
> + - bank IO0 to IO1: Fixed at 1.8V
> + - bank IO2 to IO13: Fixed at 1.8V
> + - bank IO14 to IO25: Fixed at 1.8V
> + - bank IO26 to IO37: Fixed at 1.8V
> + - bank IO38 to IO49: Fixed at 1.8V
> + - bank IO50 to IO61: Fixed at 3.3V
> + - bank IO62 to IO63: Fixed at 1.8V
> +
> + enum: [0, 1]
> +
> + required:
> + - pinmux
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + pinctrl: pinctrl@91105000 {
Drop unused labels.
> + compatible = "canaan,k230-pinctrl";
> + reg = <0x91105000 0x100>;
> +
> + uart2_pins: uart2-pins {
> + uart2-pins-cfg {
> + pinmux = <0x503>, /* uart2 txd */
> + <0x603>; /* uart2 rxd */
> + slew-rate = <0>;
> + drive-strength = <4>;
> + power-source = <1>;
> + input-enable;
> + output-enable;
> + bias-disable;
> + };
> + };
> + };
> --
> 2.46.1
>
On 9/19/24 1:13 AM, Rob Herring wrote:
> On Mon, Sep 16, 2024 at 02:42:23PM +0800, Ze Huang wrote:
>> Add device tree binding details for Canaan K230 pinctrl device.
>>
>> Signed-off-by: Ze Huang <18771902331@163.com>
>> ---
>> .../bindings/pinctrl/canaan,k230-pinctrl.yaml | 128 ++++++++++++++++++
>> 1 file changed, 128 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..979c5bd71e3d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
>> @@ -0,0 +1,128 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/canaan,k230-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Canaan Kendryte K230 Pin Controller
>> +
>> +maintainers:
>> + - Ze Huang <18771902331@163.com>
>> +
>> +description:
>> + The Canaan Kendryte K230 platform includes 64 IO pins, each capable of
>> + multiplexing up to 5 different functions. Pin function configuration is
>> + performed on a per-pin basis.
>> +
>> +properties:
>> + compatible:
>> + const: canaan,k230-pinctrl
>> +
>> + reg:
>> + maxItems: 1
>> +
>> +patternProperties:
>> + '-pins$':
>> + type: object
>> + additionalProperties: false
>> + description:
>> + A pinctrl node should contain at least one subnode representing the
>> + pinctrl groups available on the machine.
>> +
>> + patternProperties:
>> + '-cfg$':
>> + type: object
>> + $ref: /schemas/pinctrl/pincfg-node.yaml
>> + additionalProperties: false
>> + description:
>> + Each subnode will list the pins it needs, and how they should
>> + be configured, with regard to muxer configuration, bias, input
>> + enable/disable, input schmitt trigger, slew-rate enable/disable,
>> + slew-rate, drive strength.
>> +
>> + properties:
>> + pinmux:
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
> Drop. You need to add a $ref to pinmux-node.yaml (alongside
> pincfg-node.yaml).
OK. will use a allOf like this:
patternProperties:
'-cfg$':
type: object
allOf:
- $ref: /schemas/pinctrl/pincfg-node.yaml#
- $ref: /schemas/pinctrl/pinmux-node.yaml#
>
>> + description:
>> + The list of GPIOs and their mux settings that properties in
>> + the node apply to. This should be set with the macro
>> + 'K230_PINMUX(pin, mode)'
>> +
>> + bias-disable: true
>> +
>> + bias-pull-up: true
>> +
>> + bias-pull-down: true
>> +
>> + drive-strength:
>> + minimum: 0
>> + maximum: 15
>> +
>> + input-enable: true
>> +
>> + output-enable: true
>> +
>> + input-schmitt-enable: true
>> +
>> + slew-rate:
>> + $ref: /schemas/types.yaml#/definitions/uint32
> Drop. Already has a defined type.
Acknowledged.
>
>> + description: |
>> + slew rate control enable
>> + 0: disable
>> + 1: enable
>> +
>> + enum: [0, 1]
>> +
>> + power-source:
>> + $ref: /schemas/types.yaml#/definitions/uint32
> Drop. Already has a defined type.
Acknowledged.
>
>> + description: |
>> + Specifies the power source voltage for the IO bank that the
>> + pin belongs to. Each bank of IO pins operate at a specific,
>> + fixed voltage levels. Incorrect voltage configuration can
>> + damage the chip. The defined constants represent the
>> + possible voltage configurations:
>> +
>> + - K230_MSC_3V3 (value 0): 3.3V power supply
>> + - K230_MSC_1V8 (value 1): 1.8V power supply
>> +
>> + The following banks have the corresponding voltage
>> + configurations:
>> +
>> + - bank IO0 to IO1: Fixed at 1.8V
>> + - bank IO2 to IO13: Fixed at 1.8V
>> + - bank IO14 to IO25: Fixed at 1.8V
>> + - bank IO26 to IO37: Fixed at 1.8V
>> + - bank IO38 to IO49: Fixed at 1.8V
>> + - bank IO50 to IO61: Fixed at 3.3V
>> + - bank IO62 to IO63: Fixed at 1.8V
>> +
>> + enum: [0, 1]
>> +
>> + required:
>> + - pinmux
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + pinctrl: pinctrl@91105000 {
> Drop unused labels.
Will do.
>
>> + compatible = "canaan,k230-pinctrl";
>> + reg = <0x91105000 0x100>;
>> +
>> + uart2_pins: uart2-pins {
>> + uart2-pins-cfg {
>> + pinmux = <0x503>, /* uart2 txd */
>> + <0x603>; /* uart2 rxd */
>> + slew-rate = <0>;
>> + drive-strength = <4>;
>> + power-source = <1>;
>> + input-enable;
>> + output-enable;
>> + bias-disable;
>> + };
>> + };
>> + };
>> --
>> 2.46.1
>>
© 2016 - 2026 Red Hat, Inc.