[PATCH v2 3/8] riscv: dts: thead: Add TH1520 pin control nodes

Drew Fustini posted 8 patches 2 months, 2 weeks ago
There is a newer version of this series
[PATCH v2 3/8] riscv: dts: thead: Add TH1520 pin control nodes
Posted by Drew Fustini 2 months, 2 weeks ago
From: Emil Renner Berthing <emil.renner.berthing@canonical.com>

Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC.

Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
---
 arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts |  4 ++++
 .../boot/dts/thead/th1520-lichee-module-4a.dtsi    |  4 ++++
 arch/riscv/boot/dts/thead/th1520.dtsi              | 27 ++++++++++++++++++++++
 3 files changed, 35 insertions(+)

diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index d9b4de9e4757..be85e3aee56e 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -44,6 +44,10 @@ &osc_32k {
 	clock-frequency = <32768>;
 };
 
+&aonsys_clk {
+	clock-frequency = <73728000>;
+};
+
 &apb_clk {
 	clock-frequency = <62500000>;
 };
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index 1365d3a512a3..530648ad64f6 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -25,6 +25,10 @@ &osc_32k {
 	clock-frequency = <32768>;
 };
 
+&aonsys_clk {
+	clock-frequency = <73728000>;
+};
+
 &apb_clk {
 	clock-frequency = <62500000>;
 };
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 3c9974062c20..9367754eede8 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -215,6 +215,12 @@ osc_32k: 32k-oscillator {
 		#clock-cells = <0>;
 	};
 
+	aonsys_clk: aonsys-clk {
+		compatible = "fixed-clock";
+		clock-output-names = "aonsys_clk";
+		#clock-cells = <0>;
+	};
+
 	apb_clk: apb-clk-clock {
 		compatible = "fixed-clock";
 		clock-output-names = "apb_clk";
@@ -357,6 +363,13 @@ portd: gpio-controller@0 {
 			};
 		};
 
+		padctrl1_apsys: pinctrl@ffe7f3c000 {
+			compatible = "thead,th1520-pinctrl";
+			reg = <0xff 0xe7f3c000 0x0 0x1000>;
+			clocks = <&apb_clk>;
+			thead,pad-group = <2>;
+		};
+
 		gpio0: gpio@ffec005000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xec005000 0x0 0x1000>;
@@ -393,6 +406,13 @@ portb: gpio-controller@0 {
 			};
 		};
 
+		padctrl0_apsys: pinctrl@ffec007000 {
+			compatible = "thead,th1520-pinctrl";
+			reg = <0xff 0xec007000 0x0 0x1000>;
+			clocks = <&apb_clk>;
+			thead,pad-group = <3>;
+		};
+
 		uart2: serial@ffec010000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xec010000 0x0 0x4000>;
@@ -529,6 +549,13 @@ porte: gpio-controller@0 {
 			};
 		};
 
+		padctrl_aosys: pinctrl@fffff4a000 {
+			compatible = "thead,th1520-pinctrl";
+			reg = <0xff 0xfff4a000 0x0 0x2000>;
+			thead,pad-group = <1>;
+			clocks = <&aonsys_clk>;
+		};
+
 		ao_gpio1: gpio@fffff52000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff 0xfff52000 0x0 0x1000>;

-- 
2.34.1