Correctly spelled comments make it easier for the reader to understand
the code.

Replace 'platformas' with 'platforms' in the comment &
replace 'prefere' with 'prefer' in the comment &
replace 'corresponsding' with 'corresponding' in the comment &
replace 'harizontal' with 'horizontal' in the comment.

Signed-off-by: Yan Zhen <yanzhen@vivo.com>
---
 drivers/gpu/drm/i915/display/intel_display_debugfs.c | 2 +-
 drivers/gpu/drm/i915/display/intel_dpll.c            | 2 +-
 drivers/gpu/drm/i915/display/intel_lvds.c            | 2 +-
 drivers/gpu/drm/i915/display/vlv_dsi.c               | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index 830b9eb60976..d8fba1d00011 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -426,7 +426,7 @@ static void intel_scaler_info(struct seq_file *m, struct intel_crtc *crtc)
 	int num_scalers = crtc->num_scalers;
 	int i;
 
-	/* Not all platformas have a scaler */
+	/* Not all platforms have a scaler */
 	if (num_scalers) {
 		seq_printf(m, "\tnum_scalers=%d, scaler_users=%x scaler_id=%d scaling_filter=%d",
 			   num_scalers,
diff --git a/drivers/gpu/drm/i915/display/intel_dpll.c b/drivers/gpu/drm/i915/display/intel_dpll.c
index bc72d1c0cb41..38e34b72bc4e 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll.c
@@ -780,7 +780,7 @@ g4x_find_best_dpll(const struct intel_limit *limit,
 	max_n = limit->n.max;
 	/* based on hardware requirement, prefer smaller n to precision */
 	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
-		/* based on hardware requirement, prefere larger m1,m2 */
+		/* based on hardware requirement, prefer larger m1,m2 */
 		for (clock.m1 = limit->m1.max;
 		     clock.m1 >= limit->m1.min; clock.m1--) {
 			for (clock.m2 = limit->m2.max;
diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
index 1734b12ddf5e..5f753ee743c6 100644
--- a/drivers/gpu/drm/i915/display/intel_lvds.c
+++ b/drivers/gpu/drm/i915/display/intel_lvds.c
@@ -264,7 +264,7 @@ static void intel_pre_enable_lvds(struct intel_atomic_state *state,
 		temp |= LVDS_PIPE_SEL(pipe);
 	}
 
-	/* set the corresponsding LVDS_BORDER bit */
+	/* set the corresponding LVDS_BORDER bit */
 	temp &= ~LVDS_BORDER_ENABLE;
 	temp |= crtc_state->gmch_pfit.lvds_border_bits;
 
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index f19660064525..32d15bd9a358 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1072,7 +1072,7 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
 	hsync = intel_de_read(display, MIPI_HSYNC_PADDING_COUNT(display, port));
 	hbp = intel_de_read(display, MIPI_HBP_COUNT(display, port));
 
-	/* harizontal values are in terms of high speed byte clock */
+	/* horizontal values are in terms of high speed byte clock */
 	hfp = pixels_from_txbyteclkhs(hfp, bpp, lane_count,
 						intel_dsi->burst_mode_ratio);
 	hsync = pixels_from_txbyteclkhs(hsync, bpp, lane_count,
-- 
2.34.1

Hi Yan,

On Fri, Sep 13, 2024 at 02:17:27PM GMT, Yan Zhen wrote:
> Correctly spelled comments make it easier for the reader to understand
> the code.
> 
> Replace 'platformas' with 'platforms' in the comment &
> replace 'prefere' with 'prefer' in the comment &
> replace 'corresponsding' with 'corresponding' in the comment &
> replace 'harizontal' with 'horizontal' in the comment.
> 
> Signed-off-by: Yan Zhen <yanzhen@vivo.com>

reviewed and merged to drm-intel-next.

Thanks,
Andi