Add devlink knobs to enable/disable counters on NPC
default rule entries.
Introduce lowlevel variant of rvu_mcam_remove/add_counter_from/to_rule
for better code reuse, which assumes necessary locks are taken at
higher level.
Sample command to enable default rule counters:
devlink dev param set <dev> name npc_def_rule_cntr value true cmode runtime
Sample command to read the counter:
cat /sys/kernel/debug/cn10k/npc/mcam_rules
Signed-off-by: Linu Cherian <lcherian@marvell.com>
---
Changelog from v1:
Removed wrong mutex_unlock invocations.
.../net/ethernet/marvell/octeontx2/af/rvu.h | 8 +-
.../marvell/octeontx2/af/rvu_devlink.c | 32 +++++
.../ethernet/marvell/octeontx2/af/rvu_npc.c | 134 ++++++++++++++++--
.../marvell/octeontx2/af/rvu_npc_fs.c | 36 ++---
4 files changed, 171 insertions(+), 39 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 43b1d83686d1..fb4b88e94649 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -526,6 +526,7 @@ struct rvu {
struct mutex alias_lock; /* Serialize bar2 alias access */
int vfs; /* Number of VFs attached to RVU */
u16 vf_devid; /* VF devices id */
+ bool def_rule_cntr_en;
int nix_blkaddr[MAX_NIX_BLKS];
/* Mbox */
@@ -961,7 +962,11 @@ void rvu_npc_disable_default_entries(struct rvu *rvu, u16 pcifunc, int nixlf);
void rvu_npc_enable_default_entries(struct rvu *rvu, u16 pcifunc, int nixlf);
void rvu_npc_update_flowkey_alg_idx(struct rvu *rvu, u16 pcifunc, int nixlf,
int group, int alg_idx, int mcam_index);
-
+void __rvu_mcam_remove_counter_from_rule(struct rvu *rvu, u16 pcifunc,
+ struct rvu_npc_mcam_rule *rule);
+void __rvu_mcam_add_counter_to_rule(struct rvu *rvu, u16 pcifunc,
+ struct rvu_npc_mcam_rule *rule,
+ struct npc_install_flow_rsp *rsp);
void rvu_npc_get_mcam_entry_alloc_info(struct rvu *rvu, u16 pcifunc,
int blkaddr, int *alloc_cnt,
int *enable_cnt);
@@ -986,6 +991,7 @@ void npc_set_mcam_action(struct rvu *rvu, struct npc_mcam *mcam,
void npc_read_mcam_entry(struct rvu *rvu, struct npc_mcam *mcam,
int blkaddr, u16 src, struct mcam_entry *entry,
u8 *intf, u8 *ena);
+int npc_config_cntr_default_entries(struct rvu *rvu, bool enable);
bool is_cgx_config_permitted(struct rvu *rvu, u16 pcifunc);
bool is_mac_feature_supported(struct rvu *rvu, int pf, int feature);
u32 rvu_cgx_get_fifolen(struct rvu *rvu);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
index 7498ab429963..9c26e19a860b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_devlink.c
@@ -1238,6 +1238,7 @@ enum rvu_af_dl_param_id {
RVU_AF_DEVLINK_PARAM_ID_DWRR_MTU,
RVU_AF_DEVLINK_PARAM_ID_NPC_MCAM_ZONE_PERCENT,
RVU_AF_DEVLINK_PARAM_ID_NPC_EXACT_FEATURE_DISABLE,
+ RVU_AF_DEVLINK_PARAM_ID_NPC_DEF_RULE_CNTR_ENABLE,
RVU_AF_DEVLINK_PARAM_ID_NIX_MAXLF,
};
@@ -1358,6 +1359,32 @@ static int rvu_af_dl_npc_mcam_high_zone_percent_validate(struct devlink *devlink
return 0;
}
+static int rvu_af_dl_npc_def_rule_cntr_get(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ struct rvu_devlink *rvu_dl = devlink_priv(devlink);
+ struct rvu *rvu = rvu_dl->rvu;
+
+ ctx->val.vbool = rvu->def_rule_cntr_en;
+
+ return 0;
+}
+
+static int rvu_af_dl_npc_def_rule_cntr_set(struct devlink *devlink, u32 id,
+ struct devlink_param_gset_ctx *ctx,
+ struct netlink_ext_ack *extack)
+{
+ struct rvu_devlink *rvu_dl = devlink_priv(devlink);
+ struct rvu *rvu = rvu_dl->rvu;
+ int err;
+
+ err = npc_config_cntr_default_entries(rvu, ctx->val.vbool);
+ if (!err)
+ rvu->def_rule_cntr_en = ctx->val.vbool;
+
+ return err;
+}
+
static int rvu_af_dl_nix_maxlf_get(struct devlink *devlink, u32 id,
struct devlink_param_gset_ctx *ctx)
{
@@ -1444,6 +1471,11 @@ static const struct devlink_param rvu_af_dl_params[] = {
rvu_af_dl_npc_mcam_high_zone_percent_get,
rvu_af_dl_npc_mcam_high_zone_percent_set,
rvu_af_dl_npc_mcam_high_zone_percent_validate),
+ DEVLINK_PARAM_DRIVER(RVU_AF_DEVLINK_PARAM_ID_NPC_DEF_RULE_CNTR_ENABLE,
+ "npc_def_rule_cntr", DEVLINK_PARAM_TYPE_BOOL,
+ BIT(DEVLINK_PARAM_CMODE_RUNTIME),
+ rvu_af_dl_npc_def_rule_cntr_get,
+ rvu_af_dl_npc_def_rule_cntr_set, NULL),
DEVLINK_PARAM_DRIVER(RVU_AF_DEVLINK_PARAM_ID_NIX_MAXLF,
"nix_maxlf", DEVLINK_PARAM_TYPE_U16,
BIT(DEVLINK_PARAM_CMODE_RUNTIME),
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 97722ce8c4cb..9e39c3149a4f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -2691,6 +2691,51 @@ void npc_mcam_rsrcs_reserve(struct rvu *rvu, int blkaddr, int entry_idx)
npc_mcam_set_bit(mcam, entry_idx);
}
+int npc_config_cntr_default_entries(struct rvu *rvu, bool enable)
+{
+ struct npc_install_flow_rsp rsp = { 0 };
+ struct npc_mcam *mcam = &rvu->hw->mcam;
+ struct rvu_npc_mcam_rule *rule;
+ int blkaddr;
+
+ blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0);
+ if (blkaddr < 0)
+ return -EINVAL;
+
+ mutex_lock(&mcam->lock);
+ list_for_each_entry(rule, &mcam->mcam_rules, list) {
+ if (!is_mcam_entry_enabled(rvu, mcam, blkaddr, rule->entry))
+ continue;
+ if (!rule->default_rule)
+ continue;
+ if (enable && !rule->has_cntr) { /* Alloc and map new counter */
+ __rvu_mcam_add_counter_to_rule(rvu, rule->owner,
+ rule, &rsp);
+ if (rsp.counter < 0) {
+ dev_err(rvu->dev, "%s: Err to allocate cntr for default rule (err=%d)\n",
+ __func__, rsp.counter);
+ break;
+ }
+ npc_map_mcam_entry_and_cntr(rvu, mcam, blkaddr,
+ rule->entry, rsp.counter);
+ }
+
+ if (enable && rule->has_cntr) /* Reset counter before use */ {
+ rvu_write64(rvu, blkaddr,
+ NPC_AF_MATCH_STATX(rule->cntr), 0x0);
+ continue;
+ }
+
+ if (!enable && rule->has_cntr) /* Free and unmap counter */ {
+ __rvu_mcam_remove_counter_from_rule(rvu, rule->owner,
+ rule);
+ }
+ }
+ mutex_unlock(&mcam->lock);
+
+ return 0;
+}
+
int rvu_mbox_handler_npc_mcam_alloc_entry(struct rvu *rvu,
struct npc_mcam_alloc_entry_req *req,
struct npc_mcam_alloc_entry_rsp *rsp)
@@ -2975,9 +3020,9 @@ int rvu_mbox_handler_npc_mcam_shift_entry(struct rvu *rvu,
return rc;
}
-int rvu_mbox_handler_npc_mcam_alloc_counter(struct rvu *rvu,
- struct npc_mcam_alloc_counter_req *req,
- struct npc_mcam_alloc_counter_rsp *rsp)
+static int __npc_mcam_alloc_counter(struct rvu *rvu,
+ struct npc_mcam_alloc_counter_req *req,
+ struct npc_mcam_alloc_counter_rsp *rsp)
{
struct npc_mcam *mcam = &rvu->hw->mcam;
u16 pcifunc = req->hdr.pcifunc;
@@ -2998,11 +3043,9 @@ int rvu_mbox_handler_npc_mcam_alloc_counter(struct rvu *rvu,
if (!req->contig && req->count > NPC_MAX_NONCONTIG_COUNTERS)
return NPC_MCAM_INVALID_REQ;
- mutex_lock(&mcam->lock);
/* Check if unused counters are available or not */
if (!rvu_rsrc_free_count(&mcam->counters)) {
- mutex_unlock(&mcam->lock);
return NPC_MCAM_ALLOC_FAILED;
}
@@ -3035,12 +3078,27 @@ int rvu_mbox_handler_npc_mcam_alloc_counter(struct rvu *rvu,
}
}
- mutex_unlock(&mcam->lock);
return 0;
}
-int rvu_mbox_handler_npc_mcam_free_counter(struct rvu *rvu,
- struct npc_mcam_oper_counter_req *req, struct msg_rsp *rsp)
+int rvu_mbox_handler_npc_mcam_alloc_counter(struct rvu *rvu,
+ struct npc_mcam_alloc_counter_req *req,
+ struct npc_mcam_alloc_counter_rsp *rsp)
+{
+ struct npc_mcam *mcam = &rvu->hw->mcam;
+ int err;
+
+ mutex_lock(&mcam->lock);
+
+ err = __npc_mcam_alloc_counter(rvu, req, rsp);
+
+ mutex_unlock(&mcam->lock);
+ return err;
+}
+
+static int __npc_mcam_free_counter(struct rvu *rvu,
+ struct npc_mcam_oper_counter_req *req,
+ struct msg_rsp *rsp)
{
struct npc_mcam *mcam = &rvu->hw->mcam;
u16 index, entry = 0;
@@ -3050,10 +3108,8 @@ int rvu_mbox_handler_npc_mcam_free_counter(struct rvu *rvu,
if (blkaddr < 0)
return NPC_MCAM_INVALID_REQ;
- mutex_lock(&mcam->lock);
err = npc_mcam_verify_counter(mcam, req->hdr.pcifunc, req->cntr);
if (err) {
- mutex_unlock(&mcam->lock);
return err;
}
@@ -3077,10 +3133,66 @@ int rvu_mbox_handler_npc_mcam_free_counter(struct rvu *rvu,
index, req->cntr);
}
- mutex_unlock(&mcam->lock);
return 0;
}
+int rvu_mbox_handler_npc_mcam_free_counter(struct rvu *rvu,
+ struct npc_mcam_oper_counter_req *req, struct msg_rsp *rsp)
+{
+ struct npc_mcam *mcam = &rvu->hw->mcam;
+ int err;
+
+ mutex_lock(&mcam->lock);
+
+ err = __npc_mcam_free_counter(rvu, req, rsp);
+
+ mutex_unlock(&mcam->lock);
+
+ return err;
+}
+
+void __rvu_mcam_remove_counter_from_rule(struct rvu *rvu, u16 pcifunc,
+ struct rvu_npc_mcam_rule *rule)
+{
+ struct npc_mcam_oper_counter_req free_req = { 0 };
+ struct msg_rsp free_rsp;
+
+ if (!rule->has_cntr)
+ return;
+
+ free_req.hdr.pcifunc = pcifunc;
+ free_req.cntr = rule->cntr;
+
+ __npc_mcam_free_counter(rvu, &free_req, &free_rsp);
+ rule->has_cntr = false;
+}
+
+void __rvu_mcam_add_counter_to_rule(struct rvu *rvu, u16 pcifunc,
+ struct rvu_npc_mcam_rule *rule,
+ struct npc_install_flow_rsp *rsp)
+{
+ struct npc_mcam_alloc_counter_req cntr_req = { 0 };
+ struct npc_mcam_alloc_counter_rsp cntr_rsp = { 0 };
+ int err;
+
+ cntr_req.hdr.pcifunc = pcifunc;
+ cntr_req.contig = true;
+ cntr_req.count = 1;
+
+ /* we try to allocate a counter to track the stats of this
+ * rule. If counter could not be allocated then proceed
+ * without counter because counters are limited than entries.
+ */
+ err = __npc_mcam_alloc_counter(rvu, &cntr_req, &cntr_rsp);
+ if (!err && cntr_rsp.count) {
+ rule->cntr = cntr_rsp.cntr;
+ rule->has_cntr = true;
+ rsp->counter = rule->cntr;
+ } else {
+ rsp->counter = err;
+ }
+}
+
int rvu_mbox_handler_npc_mcam_unmap_counter(struct rvu *rvu,
struct npc_mcam_unmap_counter_req *req, struct msg_rsp *rsp)
{
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
index 150635de2bd5..7a1c18b1486d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
@@ -1081,44 +1081,26 @@ static void rvu_mcam_add_rule(struct npc_mcam *mcam,
static void rvu_mcam_remove_counter_from_rule(struct rvu *rvu, u16 pcifunc,
struct rvu_npc_mcam_rule *rule)
{
- struct npc_mcam_oper_counter_req free_req = { 0 };
- struct msg_rsp free_rsp;
+ struct npc_mcam *mcam = &rvu->hw->mcam;
- if (!rule->has_cntr)
- return;
+ mutex_lock(&mcam->lock);
- free_req.hdr.pcifunc = pcifunc;
- free_req.cntr = rule->cntr;
+ __rvu_mcam_remove_counter_from_rule(rvu, pcifunc, rule);
- rvu_mbox_handler_npc_mcam_free_counter(rvu, &free_req, &free_rsp);
- rule->has_cntr = false;
+ mutex_unlock(&mcam->lock);
}
static void rvu_mcam_add_counter_to_rule(struct rvu *rvu, u16 pcifunc,
struct rvu_npc_mcam_rule *rule,
struct npc_install_flow_rsp *rsp)
{
- struct npc_mcam_alloc_counter_req cntr_req = { 0 };
- struct npc_mcam_alloc_counter_rsp cntr_rsp = { 0 };
- int err;
+ struct npc_mcam *mcam = &rvu->hw->mcam;
- cntr_req.hdr.pcifunc = pcifunc;
- cntr_req.contig = true;
- cntr_req.count = 1;
+ mutex_lock(&mcam->lock);
- /* we try to allocate a counter to track the stats of this
- * rule. If counter could not be allocated then proceed
- * without counter because counters are limited than entries.
- */
- err = rvu_mbox_handler_npc_mcam_alloc_counter(rvu, &cntr_req,
- &cntr_rsp);
- if (!err && cntr_rsp.count) {
- rule->cntr = cntr_rsp.cntr;
- rule->has_cntr = true;
- rsp->counter = rule->cntr;
- } else {
- rsp->counter = err;
- }
+ __rvu_mcam_add_counter_to_rule(rvu, pcifunc, rule, rsp);
+
+ mutex_unlock(&mcam->lock);
}
static int npc_mcast_update_action_index(struct rvu *rvu, struct npc_install_flow_req *req,
--
2.34.1On Thu, Sep 12, 2024 at 09:44:49PM +0530, Linu Cherian wrote: > Add devlink knobs to enable/disable counters on NPC > default rule entries. > > Introduce lowlevel variant of rvu_mcam_remove/add_counter_from/to_rule > for better code reuse, which assumes necessary locks are taken at > higher level. > > Sample command to enable default rule counters: > devlink dev param set <dev> name npc_def_rule_cntr value true cmode runtime > > Sample command to read the counter: > cat /sys/kernel/debug/cn10k/npc/mcam_rules > > Signed-off-by: Linu Cherian <lcherian@marvell.com> > --- > Changelog from v1: > Removed wrong mutex_unlock invocations. Hi Linu, This patch seems to be doing two things: 1) Refactoring some functions to have locking and non-locking variants. By LoC this is appears the bulk of the code changed in this patch. It also appears to be straightforward. 2) Adding devlink knobs As this is a user-facing change it probably requires a deeper review than 1) I would suggest, that for review, it would be very nice to split 1) and 2) into separate patches. Maybe including a note in the patch for 1) that the refactor will be used in the following patch for 2). As for the code changes themselves, I did look over them, and I didn't see any problems.
Hi Simon, On 2024-09-14 at 13:43:17, Simon Horman (horms@kernel.org) wrote: > On Thu, Sep 12, 2024 at 09:44:49PM +0530, Linu Cherian wrote: > > Add devlink knobs to enable/disable counters on NPC > > default rule entries. > > > > Introduce lowlevel variant of rvu_mcam_remove/add_counter_from/to_rule > > for better code reuse, which assumes necessary locks are taken at > > higher level. > > > > Sample command to enable default rule counters: > > devlink dev param set <dev> name npc_def_rule_cntr value true cmode runtime > > > > Sample command to read the counter: > > cat /sys/kernel/debug/cn10k/npc/mcam_rules > > > > Signed-off-by: Linu Cherian <lcherian@marvell.com> > > --- > > Changelog from v1: > > Removed wrong mutex_unlock invocations. > > Hi Linu, > > This patch seems to be doing two things: > > 1) Refactoring some functions to have locking and non-locking variants. > By LoC this is appears the bulk of the code changed in this patch. > It also appears to be straightforward. > > 2) Adding devlink knobs > > As this is a user-facing change it probably requires a deeper review > than 1) > > I would suggest, that for review, it would be very nice to split > 1) and 2) into separate patches. Maybe including a note in the patch > for 1) that the refactor will be used in the following patch for 2). > Ack. Will split into two while reposting. > As for the code changes themselves, I did look over them, > and I didn't see any problems. Linu Cherian.
On Tue, Sep 17, 2024 at 10:08:26AM +0530, Linu Cherian wrote: > Hi Simon, > > On 2024-09-14 at 13:43:17, Simon Horman (horms@kernel.org) wrote: > > On Thu, Sep 12, 2024 at 09:44:49PM +0530, Linu Cherian wrote: > > > Add devlink knobs to enable/disable counters on NPC > > > default rule entries. > > > > > > Introduce lowlevel variant of rvu_mcam_remove/add_counter_from/to_rule > > > for better code reuse, which assumes necessary locks are taken at > > > higher level. > > > > > > Sample command to enable default rule counters: > > > devlink dev param set <dev> name npc_def_rule_cntr value true cmode runtime > > > > > > Sample command to read the counter: > > > cat /sys/kernel/debug/cn10k/npc/mcam_rules > > > > > > Signed-off-by: Linu Cherian <lcherian@marvell.com> > > > --- > > > Changelog from v1: > > > Removed wrong mutex_unlock invocations. > > > > Hi Linu, > > > > This patch seems to be doing two things: > > > > 1) Refactoring some functions to have locking and non-locking variants. > > By LoC this is appears the bulk of the code changed in this patch. > > It also appears to be straightforward. > > > > 2) Adding devlink knobs > > > > As this is a user-facing change it probably requires a deeper review > > than 1) > > > > I would suggest, that for review, it would be very nice to split > > 1) and 2) into separate patches. Maybe including a note in the patch > > for 1) that the refactor will be used in the following patch for 2). > > > > Ack. Will split into two while reposting. Thanks. Please note that net-next is currently closed for the v6.12 merge window. So please wait for it to re-open before reposting. That will occur after v6.12-rc1 is released, most likely about two weeks from now. > > > As for the code changes themselves, I did look over them, > > and I didn't see any problems. > > > Linu Cherian. >
© 2016 - 2024 Red Hat, Inc.