There are several error cases where hns_roce_create_ah() returns
directly without jumping to sw stat path, thus leading to a problem
that the ah error counter does not increase.

Fixes: ee20cc17e9d8 ("RDMA/hns: Support DSCP")
Fixes: eb7854d63db5 ("RDMA/hns: Support SW stats with debugfs")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
---
 drivers/infiniband/hw/hns/hns_roce_ah.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_ah.c b/drivers/infiniband/hw/hns/hns_roce_ah.c
index 3e02c474f59f..4fc5b9d5fea8 100644
--- a/drivers/infiniband/hw/hns/hns_roce_ah.c
+++ b/drivers/infiniband/hw/hns/hns_roce_ah.c
@@ -64,8 +64,10 @@ int hns_roce_create_ah(struct ib_ah *ibah, struct rdma_ah_init_attr *init_attr,
 	u8 tc_mode = 0;
 	int ret;
 
-	if (hr_dev->pci_dev->revision == PCI_REVISION_ID_HIP08 && udata)
-		return -EOPNOTSUPP;
+	if (hr_dev->pci_dev->revision == PCI_REVISION_ID_HIP08 && udata) {
+		ret = -EOPNOTSUPP;
+		goto err_out;
+	}
 
 	ah->av.port = rdma_ah_get_port_num(ah_attr);
 	ah->av.gid_index = grh->sgid_index;
@@ -83,7 +85,7 @@ int hns_roce_create_ah(struct ib_ah *ibah, struct rdma_ah_init_attr *init_attr,
 		ret = 0;
 
 	if (ret && grh->sgid_attr->gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP)
-		return ret;
+		goto err_out;
 
 	if (tc_mode == HNAE3_TC_MAP_MODE_DSCP &&
 	    grh->sgid_attr->gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP)
@@ -91,8 +93,10 @@ int hns_roce_create_ah(struct ib_ah *ibah, struct rdma_ah_init_attr *init_attr,
 	else
 		ah->av.sl = rdma_ah_get_sl(ah_attr);
 
-	if (!check_sl_valid(hr_dev, ah->av.sl))
-		return -EINVAL;
+	if (!check_sl_valid(hr_dev, ah->av.sl)) {
+		ret = -EINVAL;
+		goto err_out;
+	}
 
 	memcpy(ah->av.dgid, grh->dgid.raw, HNS_ROCE_GID_SIZE);
 	memcpy(ah->av.mac, ah_attr->roce.dmac, ETH_ALEN);
-- 
2.33.0

On Thu, 12 Sep 2024 19:57:00 +0800, Junxian Huang wrote:
> There are several error cases where hns_roce_create_ah() returns
> directly without jumping to sw stat path, thus leading to a problem
> that the ah error counter does not increase.
> 
> 

Applied, thanks!

[1/1] RDMA/hns: Fix ah error counter in sw stat not increasing
      https://git.kernel.org/rdma/rdma/c/39c047d4047a12

Best regards,
-- 
Leon Romanovsky <leon@kernel.org>