Adding support of ADI ARMv8 ADSP-SC598 SoC.

[PATCH 20/21] arm64: defconfig: sc598 add minimal changes

Posted by Arturs Artamonovs via B4 Relay 2 months, 2 weeks ago

From: Arturs Artamonovs <arturs.artamonovs@analog.com>

Add ADSP-SC598 defconfig

Signed-off-by: Arturs Artamonovs <Arturs.Artamonovs@analog.com>
Co-developed-by: Utsav Agarwal <Utsav.Agarwal@analog.com>
Signed-off-by: Utsav Agarwal <Utsav.Agarwal@analog.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
---
 arch/arm64/configs/defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 362df939026383a26ee23485d1ec25b252b90d5d..7801dd7d7d65bc504dc6e2945f92f261f2911115 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -67,6 +67,7 @@ CONFIG_ARCH_SEATTLE=y
 CONFIG_ARCH_INTEL_SOCFPGA=y
 CONFIG_ARCH_STM32=y
 CONFIG_ARCH_SYNQUACER=y
+CONFIG_ARCH_SC59X_64=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_TESLA_FSD=y
 CONFIG_ARCH_SPRD=y
@@ -473,6 +474,7 @@ CONFIG_SERIAL_8250_OMAP=y
 CONFIG_SERIAL_8250_MT6577=y
 CONFIG_SERIAL_8250_UNIPHIER=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_ADI_UART=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_MESON=y
@@ -513,6 +515,7 @@ CONFIG_TCG_TIS_I2C_CR50=m
 CONFIG_TCG_TIS_I2C_INFINEON=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
+CONFIG_I2C_ADI_TWI=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_BCM2835=m
 CONFIG_I2C_CADENCE=m
@@ -539,6 +542,7 @@ CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_SPI=y
+CONFIG_SPI_ADI=y
 CONFIG_SPI_ARMADA_3700=y
 CONFIG_SPI_BCM2835=m
 CONFIG_SPI_BCM2835AUX=m
@@ -637,6 +641,7 @@ CONFIG_PINCTRL_SM8450_LPASS_LPI=m
 CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m
 CONFIG_PINCTRL_SM8550_LPASS_LPI=m
 CONFIG_PINCTRL_SM8650_LPASS_LPI=m
+CONFIG_GPIO_ADI_ADSP_PORT=y
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
@@ -1512,6 +1517,7 @@ CONFIG_RESET_QCOM_AOSS=y
 CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_RZG2L_USBPHY_CTRL=y
 CONFIG_RESET_TI_SCI=y
+CONFIG_RESET_SC5XX=y
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_CAN_TRANSCEIVER=m
 CONFIG_PHY_SUN4I_USB=y

-- 
2.25.1

Re: [PATCH 20/21] arm64: defconfig: sc598 add minimal changes

Posted by Krzysztof Kozlowski 2 months, 2 weeks ago

On 12/09/2024 20:25, Arturs Artamonovs via B4 Relay wrote:
> From: Arturs Artamonovs <arturs.artamonovs@analog.com>
> 
> Add ADSP-SC598 defconfig

That's neither true nor helpful. Say more about hardware. That's a
defconfig for all platforms, not only yours.
> 
> Signed-off-by: Arturs Artamonovs <Arturs.Artamonovs@analog.com>
> Co-developed-by: Utsav Agarwal <Utsav.Agarwal@analog.com>
> Signed-off-by: Utsav Agarwal <Utsav.Agarwal@analog.com>
> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
> Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
> Signed-off-by: Greg Malysa <greg.malysa@timesys.com>

4 people contributed to simple defconfig? How?

Best regards,
Krzysztof

Re: [PATCH 20/21] arm64: defconfig: sc598 add minimal changes

Posted by Arnd Bergmann 2 months, 2 weeks ago

On Thu, Sep 12, 2024, at 18:25, Arturs Artamonovs via B4 Relay wrote:
> From: Arturs Artamonovs <arturs.artamonovs@analog.com>
>
> Add ADSP-SC598 defconfig
>
> @@ -513,6 +515,7 @@ CONFIG_TCG_TIS_I2C_CR50=m
>  CONFIG_TCG_TIS_I2C_INFINEON=y
>  CONFIG_I2C_CHARDEV=y
>  CONFIG_I2C_MUX=y
> +CONFIG_I2C_ADI_TWI=y
>  CONFIG_I2C_MUX_PCA954x=y
>  CONFIG_I2C_BCM2835=m
>  CONFIG_I2C_CADENCE=m
> @@ -539,6 +542,7 @@ CONFIG_I2C_UNIPHIER_F=y
>  CONFIG_I2C_RCAR=y
>  CONFIG_I2C_CROS_EC_TUNNEL=y
>  CONFIG_SPI=y
> +CONFIG_SPI_ADI=y
>  CONFIG_SPI_ARMADA_3700=y
>  CONFIG_SPI_BCM2835=m
>  CONFIG_SPI_BCM2835AUX=m

These are usually not required for booting and should be
made loadable modules if possible.

      Arnd