Use the proper "-gpios" property name, fixing:
hub@1: 'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
index 941682844faf..962bbe3337db 100644
--- a/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
@@ -378,6 +378,6 @@ hub@1 {
 		compatible = "usb5e3,610";
 		reg = <1>;
 		vdd-supply = <&p5v0>;
-		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
 	};
 };

-- 
2.34.1

On Wed, Sep 11, 2024 at 12:19 PM Neil Armstrong
<neil.armstrong@linaro.org> wrote:
>
> Use the proper "-gpios" property name, fixing:
> hub@1: 'reset-gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
>         from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>