Fixed some confusing typographical errors:
comptabile->compatible,
asignment->assignment,
Verison->Version,
meansurement->measurement,
offets->offsets.

Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
---
 drivers/regulator/da903x-regulator.c    | 2 +-
 drivers/regulator/da9063-regulator.c    | 2 +-
 drivers/regulator/fan53555.c            | 2 +-
 drivers/regulator/max5970-regulator.c   | 2 +-
 drivers/regulator/qcom_spmi-regulator.c | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/da903x-regulator.c b/drivers/regulator/da903x-regulator.c
index f79337079a45..2f85897183b3 100644
--- a/drivers/regulator/da903x-regulator.c
+++ b/drivers/regulator/da903x-regulator.c
@@ -61,7 +61,7 @@
 #define DA9034_MDTV2		(0x33)
 #define DA9034_MVRC		(0x34)
 
-/* DA9035 Registers. DA9034 Registers are comptabile to DA9035. */
+/* DA9035 Registers. DA9034 Registers are compatible to DA9035. */
 #define DA9035_OVER3		(0x12)
 #define DA9035_VCC2		(0x1f)
 #define DA9035_3DTV1		(0x2c)
diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 82bf321ae06f..e7dcfe40a278 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -133,7 +133,7 @@ struct da9063_regulator_info {
 	.suspend_vsel_reg = DA9063_REG_V##regl_name##_B, \
 	.mode = BFIELD(DA9063_REG_##regl_name##_CFG, DA9063_BUCK_MODE_MASK)
 
-/* Defines asignment of regulators info table to chip model */
+/* Defines assignment of regulators info table to chip model */
 struct da9063_dev_model {
 	const struct da9063_regulator_info	*regulator_info;
 	unsigned int				n_regulators;
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 17c9bf204385..bd9447dac596 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -46,7 +46,7 @@
 /* VSEL bit definitions */
 #define VSEL_BUCK_EN		BIT(7)
 #define VSEL_MODE		BIT(6)
-/* Chip ID and Verison */
+/* Chip ID and Version */
 #define DIE_ID			0x0F	/* ID1 */
 #define DIE_REV			0x0F	/* ID2 */
 /* Control bit definitions */
diff --git a/drivers/regulator/max5970-regulator.c b/drivers/regulator/max5970-regulator.c
index 8bbcd983a74a..4a568b1b0107 100644
--- a/drivers/regulator/max5970-regulator.c
+++ b/drivers/regulator/max5970-regulator.c
@@ -70,7 +70,7 @@ static int max5970_read(struct device *dev, enum hwmon_sensor_types type,
 			 * millivolts) and then divide it by the maximum value of the 10-bit ADC.
 			 */
 			*val = (*val * ddata->irng) >> 10;
-			/* Convert the voltage meansurement across shunt resistor to current */
+			/* Convert the voltage measurement across shunt resistor to current */
 			*val = (*val * 1000) / ddata->shunt_micro_ohms;
 			return 0;
 		default:
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 89657e8eea82..d66a0f61637e 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -245,7 +245,7 @@ enum spmi_saw3_registers {
 	SAW3_VERSION				= 0xFD0,
 };
 
-/* Used for indexing into ctrl_reg.  These are offets from 0x40 */
+/* Used for indexing into ctrl_reg.  These are offsets from 0x40 */
 enum spmi_common_control_register_index {
 	SPMI_COMMON_IDX_VOLTAGE_RANGE		= 0,
 	SPMI_COMMON_IDX_VOLTAGE_SET		= 1,
-- 
2.34.1

On Tue, 10 Sep 2024 14:46:30 +0800, Yu Jiaoliang wrote:
> Fixed some confusing typographical errors:
> comptabile->compatible,
> asignment->assignment,
> Verison->Version,
> meansurement->measurement,
> offets->offsets.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: Fix typos in the comment
      commit: 886fee35251107e169128723215b1f779a668be5

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark