1. Patchew
  2. linux
  3. [PATCH v4 00/10] Add minimal Exynos8895 SoC and SM-G950F support
  4. View patch

[PATCH v4 05/10] pinctrl: samsung: Add exynos8895 SoC pinctrl configuration

Ivaylo Ivanov posted 10 patches 2 months, 3 weeks ago
There is a newer version of this series
[PATCH v4 05/10] pinctrl: samsung: Add exynos8895 SoC pinctrl configuration
Posted by Ivaylo Ivanov 2 months, 3 weeks ago 
Add support for the pin-controller found on the Exynos8895 SoC
used in Samsung Galaxy S8 and S8 Plus phones.

It has a newly applied pinctrl register layer for FSYS0 with a
different bank type offset that consists of the following bit
fields:

CON: 4, DAT: 1, PUD: 2, DRV: 3, CONPDN: 2, PUDPDN: 2

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
---
 .../pinctrl/samsung/pinctrl-exynos-arm64.c    | 137 ++++++++++++++++++
 drivers/pinctrl/samsung/pinctrl-exynos.h      |  10 ++
 drivers/pinctrl/samsung/pinctrl-samsung.c     |   2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h     |   1 +
 4 files changed, 150 insertions(+)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index 5480e0884..c5df4f1bc 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -58,6 +58,15 @@ static const struct samsung_pin_bank_type exynos850_bank_type_alive = {
 	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
 };
 
+/*
+ * Bank type for non-alive type. Bit fields:
+ * CON: 4, DAT: 1, PUD: 2, DRV: 3, CONPDN: 2, PUDPDN: 2
+ */
+static const struct samsung_pin_bank_type exynos8895_bank_type_off  = {
+	.fld_width = { 4, 1, 2, 3, 2, 2, },
+	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
+};
+
 /* Pad retention control code for accessing PMU regmap */
 static atomic_t exynos_shared_retention_refcnt;
 
@@ -866,6 +875,134 @@ const struct samsung_pinctrl_of_match_data exynosautov920_of_data __initconst =
 	.num_ctrl	= ARRAY_SIZE(exynosautov920_pin_ctrl),
 };
 
+/* pin banks of exynos8895 pin-controller 0 (ALIVE) */
+static const struct samsung_pin_bank_data exynos8895_pin_banks0[] __initconst = {
+	EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0x080, "gpa3", 0x0c),
+	EXYNOS_PIN_BANK_EINTW(7, 0x0a0, "gpa4", 0x24),
+};
+
+/* pin banks of exynos8895 pin-controller 1 (ABOX) */
+static const struct samsung_pin_bank_data exynos8895_pin_banks1[] __initconst = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gph0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(7, 0x020, "gph1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(4, 0x040, "gph3", 0x08),
+};
+
+/* pin banks of exynos8895 pin-controller 2 (VTS) */
+static const struct samsung_pin_bank_data exynos8895_pin_banks2[] __initconst = {
+	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gph2", 0x00),
+};
+
+/* pin banks of exynos8895 pin-controller 3 (FSYS0) */
+static const struct samsung_pin_bank_data exynos8895_pin_banks3[] __initconst = {
+	EXYNOS8895_PIN_BANK_EINTG(3, 0x000, "gpi0", 0x00),
+	EXYNOS8895_PIN_BANK_EINTG(8, 0x020, "gpi1", 0x04),
+};
+
+/* pin banks of exynos8895 pin-controller 4 (FSYS1) */
+static const struct samsung_pin_bank_data exynos8895_pin_banks4[] __initconst = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj1", 0x00),
+	EXYNOS_PIN_BANK_EINTG(7, 0x020, "gpj0", 0x04),
+};
+
+/* pin banks of exynos8895 pin-controller 5 (BUSC) */
+static const struct samsung_pin_bank_data exynos8895_pin_banks5[] __initconst = {
+	EXYNOS_PIN_BANK_EINTG(2, 0x000, "gpb2", 0x00),
+};
+
+/* pin banks of exynos8895 pin-controller 6 (PERIC0) */
+static const struct samsung_pin_bank_data exynos8895_pin_banks6[] __initconst = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpd0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpd1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpd2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpd3", 0x0C),
+	EXYNOS_PIN_BANK_EINTG(4, 0x080, "gpb1", 0x10),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpe7", 0x14),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0c0, "gpf1", 0x18),
+};
+
+/* pin banks of exynos8895 pin-controller 7 (PERIC1) */
+static const struct samsung_pin_bank_data exynos8895_pin_banks7[] __initconst = {
+	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpb0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpc0", 0x04),
+	EXYNOS_PIN_BANK_EINTG(5, 0x040, "gpc1", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpc2", 0x0C),
+	EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpc3", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0a0, "gpk0", 0x14),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0c0, "gpe5", 0x18),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0e0, "gpe6", 0x1C),
+	EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe2", 0x20),
+	EXYNOS_PIN_BANK_EINTG(8, 0x120, "gpe3", 0x24),
+	EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe4", 0x28),
+	EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpf0", 0x2C),
+	EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpe1", 0x30),
+	EXYNOS_PIN_BANK_EINTG(2, 0x1a0, "gpg0", 0x34),
+};
+
+static const struct samsung_pin_ctrl exynos8895_pin_ctrl[] __initconst = {
+	{
+		/* pin-controller instance 0 ALIVE data */
+		.pin_banks	= exynos8895_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos8895_pin_banks0),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 1 ABOX data */
+		.pin_banks	= exynos8895_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos8895_pin_banks1),
+	}, {
+		/* pin-controller instance 2 VTS data */
+		.pin_banks	= exynos8895_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos8895_pin_banks2),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 3 FSYS0 data */
+		.pin_banks	= exynos8895_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos8895_pin_banks3),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 4 FSYS1 data */
+		.pin_banks	= exynos8895_pin_banks4,
+		.nr_banks	= ARRAY_SIZE(exynos8895_pin_banks4),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 5 BUSC data */
+		.pin_banks	= exynos8895_pin_banks5,
+		.nr_banks	= ARRAY_SIZE(exynos8895_pin_banks5),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 6 PERIC0 data */
+		.pin_banks	= exynos8895_pin_banks6,
+		.nr_banks	= ARRAY_SIZE(exynos8895_pin_banks6),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 7 PERIC1 data */
+		.pin_banks	= exynos8895_pin_banks7,
+		.nr_banks	= ARRAY_SIZE(exynos8895_pin_banks7),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	},
+};
+
+const struct samsung_pinctrl_of_match_data exynos8895_of_data __initconst = {
+	.ctrl		= exynos8895_pin_ctrl,
+	.num_ctrl	= ARRAY_SIZE(exynos8895_pin_ctrl),
+};
+
 /*
  * Pinctrl driver data for Tesla FSD SoC. FSD SoC includes three
  * gpio/pin-mux/pinconfig controllers.
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index 305cb1d31..7b7ff7ffe 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -141,6 +141,16 @@
 		.name		= id				\
 	}
 
+#define EXYNOS8895_PIN_BANK_EINTG(pins, reg, id, offs)		\
+	{							\
+		.type		= &exynos8895_bank_type_off,	\
+		.pctl_offset	= reg,				\
+		.nr_pins	= pins,				\
+		.eint_type	= EINT_TYPE_GPIO,		\
+		.eint_offset	= offs,				\
+		.name		= id				\
+	}
+
 #define EXYNOSV920_PIN_BANK_EINTG(pins, reg, id, con_offs, mask_offs, pend_offs)	\
 	{							\
 		.type			= &exynos850_bank_type_off,	\
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 623df65a5..ea3214897 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1409,6 +1409,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 		.data = &exynos7885_of_data },
 	{ .compatible = "samsung,exynos850-pinctrl",
 		.data = &exynos850_of_data },
+	{ .compatible = "samsung,exynos8895-pinctrl",
+		.data = &exynos8895_of_data },
 	{ .compatible = "samsung,exynosautov9-pinctrl",
 		.data = &exynosautov9_of_data },
 	{ .compatible = "samsung,exynosautov920-pinctrl",
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index d50ba6f07..f18877f2f 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -363,6 +363,7 @@ extern const struct samsung_pinctrl_of_match_data exynos5433_of_data;
 extern const struct samsung_pinctrl_of_match_data exynos7_of_data;
 extern const struct samsung_pinctrl_of_match_data exynos7885_of_data;
 extern const struct samsung_pinctrl_of_match_data exynos850_of_data;
+extern const struct samsung_pinctrl_of_match_data exynos8895_of_data;
 extern const struct samsung_pinctrl_of_match_data exynosautov9_of_data;
 extern const struct samsung_pinctrl_of_match_data exynosautov920_of_data;
 extern const struct samsung_pinctrl_of_match_data fsd_of_data;
-- 
2.34.1
Re: [PATCH v4 05/10] pinctrl: samsung: Add exynos8895 SoC pinctrl configuration
Posted by Linus Walleij 2 months, 1 week ago 
On Mon, Sep 9, 2024 at 1:00 PM Ivaylo Ivanov
<ivo.ivanov.ivanov1@gmail.com> wrote:

> Add support for the pin-controller found on the Exynos8895 SoC
> used in Samsung Galaxy S8 and S8 Plus phones.
>
> It has a newly applied pinctrl register layer for FSYS0 with a
> different bank type offset that consists of the following bit
> fields:
>
> CON: 4, DAT: 1, PUD: 2, DRV: 3, CONPDN: 2, PUDPDN: 2
>
> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

I expect either Krzysztof will queue this or it will come in through
some other tree.

Yours,
Linus Walleij

Patchew 2.1-devel-b67e4c2

© 2016 - 2024 Red Hat, Inc.