It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).

Hence, switch to devm_pm_runtime_enable() to fix it, so the
pm_runtime_disable() in probe error path and remove function
can be removed.

Fixes: cfdab2cd85ec ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v3:
- Fix it with devm_pm_runtime_enable() as Dmitry suggested.
- Adjust to be the first patch.
- Add suggested-by.
v2:
- Fix it directly instead of use devm_pm_runtime_enable().
---
 drivers/spi/spi-geni-qcom.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index 37ef8c40b276..fef522fece1b 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -1110,25 +1110,27 @@ static int spi_geni_probe(struct platform_device *pdev)
 	spin_lock_init(&mas->lock);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 250);
-	pm_runtime_enable(dev);
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
 
 	if (device_property_read_bool(&pdev->dev, "spi-slave"))
 		spi->target = true;
 
 	ret = geni_icc_get(&mas->se, NULL);
 	if (ret)
-		goto spi_geni_probe_runtime_disable;
+		return ret;
 	/* Set the bus quota to a reasonable value for register access */
 	mas->se.icc_paths[GENI_TO_CORE].avg_bw = Bps_to_icc(CORE_2X_50_MHZ);
 	mas->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
 
 	ret = geni_icc_set_bw(&mas->se);
 	if (ret)
-		goto spi_geni_probe_runtime_disable;
+		return ret;
 
 	ret = spi_geni_init(mas);
 	if (ret)
-		goto spi_geni_probe_runtime_disable;
+		return ret;
 
 	/*
 	 * check the mode supported and set_cs for fifo mode only
@@ -1157,8 +1159,6 @@ static int spi_geni_probe(struct platform_device *pdev)
 	free_irq(mas->irq, spi);
 spi_geni_release_dma:
 	spi_geni_release_dma_chan(mas);
-spi_geni_probe_runtime_disable:
-	pm_runtime_disable(dev);
 	return ret;
 }
 
@@ -1173,7 +1173,6 @@ static void spi_geni_remove(struct platform_device *pdev)
 	spi_geni_release_dma_chan(mas);
 
 	free_irq(mas->irq, spi);
-	pm_runtime_disable(&pdev->dev);
 }
 
 static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
-- 
2.34.1

On Mon, Sep 09, 2024 at 03:31:39PM GMT, Jinjie Ruan wrote:
> It's important to undo pm_runtime_use_autosuspend() with
> pm_runtime_dont_use_autosuspend() at driver exit time unless driver
> initially enabled pm_runtime with devm_pm_runtime_enable()
> (which handles it for you).
> 
> Hence, switch to devm_pm_runtime_enable() to fix it, so the
> pm_runtime_disable() in probe error path and remove function
> can be removed.
> 
> Fixes: cfdab2cd85ec ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms")
> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> v3:
> - Fix it with devm_pm_runtime_enable() as Dmitry suggested.
> - Adjust to be the first patch.
> - Add suggested-by.
> v2:
> - Fix it directly instead of use devm_pm_runtime_enable().
> ---
>  drivers/spi/spi-geni-qcom.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


-- 
With best wishes
Dmitry