From: Shoji Keita <awaittrot@shjk.jp>

For lis3mdl, values are based on datasheet and PCB drawing
and tested on a real device.

For af8133j, values are from testing on a real device.

Signed-off-by: Shoji Keita <awaittrot@shjk.jp>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>

---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 66fbb35a7fae9..d35d747292ce6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -195,6 +195,9 @@ af8133j: magnetometer@1c {
 		reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
 		avdd-supply = <&reg_dldo1>;
 		dvdd-supply = <&reg_dldo1>;
+		mount-matrix = "0", "-1", "0",
+				"-1", "0", "0",
+				"0", "0", "-1";
 
 		/* status will be fixed up in firmware */
 		status = "disabled";
@@ -206,6 +209,9 @@ lis3mdl: magnetometer@1e {
 		reg = <0x1e>;
 		vdd-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_dldo1>;
+		mount-matrix = "0", "1", "0",
+				"-1", "0", "0",
+				"0", "0", "1";
 	};
 
 	/* Light/proximity sensor */
-- 
2.45.2