TMP006 sensor has a DRDY (data ready) active-low interrupt which
indicates that a new measurement is ready to be read.

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
---
 .../devicetree/bindings/iio/temperature/ti,tmp006.yaml      | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
index d43002b9bfdc..590f50ba3a31 100644
--- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
@@ -23,6 +23,9 @@ properties:
   vdd-supply:
     description: provide VDD power to the sensor.
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -31,6 +34,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -38,5 +42,7 @@ examples:
             compatible = "ti,tmp006";
             reg = <0x40>;
             vdd-supply = <&ldo4_reg>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
         };
     };
-- 
2.25.1

On Sun, Sep 08, 2024 at 07:21:55PM +0200, Antoni Pokusinski wrote:
> TMP006 sensor has a DRDY (data ready) active-low interrupt which
> indicates that a new measurement is ready to be read.
> 
> Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
> ---
>  .../devicetree/bindings/iio/temperature/ti,tmp006.yaml      | 6 ++++++
>  1 file changed, 6 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

<form letter>
This is an automated instruction, just in case, because many review tags
are being ignored. If you know the process, you can skip it (please do
not feel offended by me posting it here - no bad intentions intended).
If you do not know the process, here is a short explanation:

Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.

https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
</form letter>

Best regards,
Krzysztof