The AD7606C-16 and AD7606C-18 are pretty similar with the AD7606B.
The main difference between AD7606C-16 & AD7606C-18 is the precision in
bits (16 vs 18).
Because of that, some scales need to be defined for the 18-bit variants, as
they need to be computed against 2**18 (vs 2**16 for the 16 bit-variants).
Because the AD7606C-16,18 also supports bipolar & differential channels,
for SW-mode, the default range of 10 V or ±10V should be set at probe.
On reset, the default range (in the registers) is set to value 0x3 which
corresponds to '±10 V single-ended range', regardless of bipolar or
differential configuration.
Aside from the scale/ranges, the AD7606C-16 is similar to the AD7606B.
This changeset, does a bit of rework to the existing ad7606 driver and then
adds support for the AD7606C-16 & AD7606C-18 parts.
Datasheet links:
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-16.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-18.pdf
Changelog v4 -> v5:
- v4: https://lore.kernel.org/linux-iio/20240905082404.119022-1-aardelean@baylibre.com/
- Not all topics from v4 have been fully resolved; but I created a v5 in
case it helps to spot other (new) topics
- Added patch 'iio: adc: ad7606: remove frstdata check for serial mode'
- This is from the 'fixes-togreg' branch
- It should be ignored
- Should help with a bit of context for this series
- For patch 'iio: adc: ad7606: add 'bits' parameter to channels macros'
- Added '.storagebits = (bits) > 16 ? 32 : 16'
- Reduces the final patch a bit
- i.e. 'iio: adc: ad7606: add support for AD7606C-{16,18} parts'
- For patch 'iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct() '
- Added 'Reviewed-by: David Lechner <dlechner@baylibre.com>'
- For patch 'iio: adc: ad7606: rework available attributes for SW channels'
- Added '.storagebits = (bits) > 16 ? 32 : 16'
- Reduces the final patch a bit
- i.e. 'iio: adc: ad7606: add support for AD7606C-{16,18} parts'
- For patch 'dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts'
- Added '"^channel@[1-8]$": false' if not 'adi,sw-mode'
- Added 'Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>'
- Given the change, I would need confirmation that the Krzysztof's
Reviewed-by tag is still valid
- There is still an open topic about using
'oneOf:required:{diff-channels,bipolar}' vs
'if:required: [diff-channels]then:required: [bipolar]'
- I'm leaning towards 'oneOf:required:{diff-channels,bipolar}'
- Let's see what a discussio will yield
- For patch 'iio: adc: ad7606: add support for AD7606C-{16,18} parts'
- In 'ad7606_spi_read_block18to32()' fixed
'.len = count * sizeof(uint32_t)' in 'struct spi_transfer xfer'
- In 'ad7606_read_samples()' changed 'u16 *data = st->data;' to
'void *data = st->data.d16;' ; both would compile though ;
converting 'data' to 'void *' may show that it's not just 16 bits
- In ad7606c_18_chan_setup() & ad7606c_16_chan_setup()
- Added explicit 'cs->reg_offset = 0;'
- In 'ad7606c_sw_mode_setup_channels()' :
- If pins are specified incorrectly, an error is triggered (vs
ignoring it before)
- Updated comment about why 'st->bops->sw_mode_config()' is called
first
Changelog v3 -> v4:
- v3: https://lore.kernel.org/linux-iio/20240904072718.1143440-1-aardelean@baylibre.com/
- For patch 'dt-bindings: iio: adc: document diff-channels corner case
for some ADCs'
- Added 'Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>'
- Renamed patch 'dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings'
to 'dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts'
- Updated based on notes from Krzysztof Kozlowski (from v3)
- Dropped ()
- Re-ordered the patternProperties:oneOf:required specification
- Unified match-pattern to '^channel@[1-8]$'
Changelog v2 -> v3:
- v2: https://lore.kernel.org/linux-iio/20240902103638.686039-1-aardelean@baylibre.com/
- Applied checkpatch.pl changes
- Managed to setup and run 'make dt_binding_check DT_SCHEMA_FILES=adi,ad7606.yaml'
- Found the winning combination for this setup
- David Lechner also helped
- For patch 'iio: adc: ad7606: rework available attributes for SW channels'
- Removed an extra space that checkpatch found
- For patch 'dt-bindings: iio: adc: document diff-channels corner case
for some ADCs'
- Removed 'the the' stutter (that I did in writing)
- For patch 'dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings'
- Updated binding with some description for 'diff-channels' & 'bipolar'
properties
- Channel definitions are counted from 1 to 8 to match datasheet
- Added more bindings rules for 'diff-channels' & 'bipolar' for AD7606C
- Adapted some ideas from adi,ad7192.yaml
- For patch 'iio: adc: ad7606: add support for AD7606C-{16,18} parts'
- Updated 'diff-channels' property with channel numbers (from 1 to 8)
handling
Changelog v1 -> v2:
- v1: https://lore.kernel.org/linux-iio/20240819064721.91494-1-aardelean@baylibre.com/
- Fixed description in 'iio: adc: ad7606: add 'bits' parameter to channels macros'
- Added patch 'dt-bindings: iio: adc: document diff-channels corner case
for some ADCs'
- diff-channels = <reg reg> can be used to define differential channels
with dedicated positive + negative pins
- Re-worked patch 'dt-bindings: iio: adc: add adi,ad7606c-{16,18} compatible strings'
- Using standard 'diff-channels' & 'bipolar' properties from adc.yaml
- Re-worked patch 'iio: adc: ad7606: add support for AD7606C-{16,18} parts'
- Reading 18-bit samples now relies on SPI controllers being able to
pad 18-bits to 32-bits.
- Implemented 'diff-channels = <reg reg>' setting
- Removed some bad/left-over channel configuration code which I forgot
during development and rebasing.
Alexandru Ardelean (8):
iio: adc: ad7606: add 'bits' parameter to channels macros
iio: adc: ad7606: move 'val' pointer to ad7606_scan_direct()
iio: adc: ad7606: split a 'ad7606_sw_mode_setup()' from probe
iio: adc: ad7606: wrap channel ranges & scales into struct
iio: adc: ad7606: rework available attributes for SW channels
dt-bindings: iio: adc: document diff-channels corner case for some
ADCs
dt-bindings: iio: adc: add docs for AD7606C-{16,18} parts
iio: adc: ad7606: add support for AD7606C-{16,18} parts
Guillaume Stols (1):
iio: adc: ad7606: remove frstdata check for serial mode
.../devicetree/bindings/iio/adc/adc.yaml | 4 +
.../bindings/iio/adc/adi,ad7606.yaml | 117 +++++
drivers/iio/adc/ad7606.c | 432 ++++++++++++++----
drivers/iio/adc/ad7606.h | 80 +++-
drivers/iio/adc/ad7606_par.c | 48 +-
drivers/iio/adc/ad7606_spi.c | 71 ++-
6 files changed, 633 insertions(+), 119 deletions(-)
--
2.46.0