On Tue, Sep 03, 2024 at 03:17:51PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Add 'nxp,ctrl-ids' for SCMI firmware to confirm the board ctrls as
s/confirm/configure?
> wakeup sources.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> index 37a1d4ca1b20..5101cd171e09 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> @@ -8,6 +8,15 @@
> #include <dt-bindings/pwm/pwm.h>
> #include "imx95.dtsi"
>
> +#define FALLING_EDGE 1
> +#define RISING_EDGE 2
> +
> +#define BRD_SM_CTRL_SD3_WAKE 0x8000 /* PCAL6408A-0 */
> +#define BRD_SM_CTRL_PCIE1_WAKE 0x8001 /* PCAL6408A-4 */
> +#define BRD_SM_CTRL_BT_WAKE 0x8002 /* PCAL6408A-5 */
> +#define BRD_SM_CTRL_PCIE2_WAKE 0x8003 /* PCAL6408A-6 */
> +#define BRD_SM_CTRL_BUTTON 0x8004 /* PCAL6408A-7 */
Are these defines board specific?
Shawn
> +
> / {
> model = "NXP i.MX95 19X19 board";
> compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
> @@ -357,6 +366,14 @@ &usdhc2 {
> status = "okay";
> };
>
> +&scmi_misc {
> + nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE FALLING_EDGE
> + BRD_SM_CTRL_PCIE1_WAKE FALLING_EDGE
> + BRD_SM_CTRL_BT_WAKE FALLING_EDGE
> + BRD_SM_CTRL_PCIE2_WAKE FALLING_EDGE
> + BRD_SM_CTRL_BUTTON FALLING_EDGE>;
> +};
> +
> &wdog3 {
> fsl,ext-reset-output;
> status = "okay";
>
> --
> 2.37.1
>